What are the reasons why the Audi rear window sunshade cannot be retracted?

1 Answers
OJuliette
07/30/25 8:43am
Audi rear window sunshade cannot be retracted may be caused by the transmission part of the motor and gear teeth, the sliding rail part, the sunshade part, the roller bracket part and other reasons. Transmission part of motor and gear teeth: Carefully check the tooth engagement part of the motor and gear teeth, but no excessive wear is found, so the cause of the fault cannot be determined at this time. Continue to check the remaining parts. Sliding rail part: Remove the roller bracket and roller slide completely and carefully check whether there are foreign objects in the sliding rail. The space of the sliding rail is small, and after careful inspection and cleaning, no abnormalities are found. Continue to check the remaining parts.
Was this review help?
8
4
Share
More Forum Discussions

Can a Flood-Damaged Car Still Be Driven After Repair?

A flood-damaged car can still be driven after repair, but it will never be the same as before. The likelihood of malfunctions during future driving will increase, and issues such as abnormal noises may occur. Therefore, special attention should be paid to the maintenance of flood-damaged vehicles. Here’s what to do if your car is flooded: Do not attempt to start the car after it has been submerged in water. Take photos of the scene, including the license plate number (which can serve as evidence for insurance claims). Call your insurance company to report the incident (you must report within 24 hours). Call for a tow truck and inform the insurance company about the repair shop where the car will be taken so that an adjuster can inspect it. While waiting for rescue, you can disconnect the vehicle's power (remove the negative terminal), shift to neutral, and push the car to a safe location. Before repairs, report to the insurance company to assess the damage as required.
9
1
Share

How often does a driver's license need to be renewed?

Driver's license renewal regulations: 1. The first renewal is required six years after the initial application for the driver's license; 2. For the first renewal after the initial validity period expires, if there is no record of full demerit points (12 points) within the first 6-year validity period, you can renew for a 10-year validity period driver's license. If there is a record of accumulating 12 demerit points, you can only renew for a 6-year validity period license and must wait until the 10-year validity period expires to renew again; 3. If there is no record of full demerit points within the 10-year validity period, you can renew for a long-term valid license, which can be used until the age of 60. After 60 years old, an annual inspection and submission of a medical examination certificate are required. According to regulations, you can apply for renewal at the local vehicle management office 90 days before the expiration of the driver's license. Before applying, all traffic violations and accidents related to the driver's license must be resolved, and the license must be kept in normal status.
5
2
Share

After how many years does a car require biannual inspections?

Cars that are over 15 years old require biannual inspections. For family-owned small passenger vehicles with 7 seats or fewer (including 7 seats), there is an exemption from on-site inspections for the first 6 years from the date of purchase. However, vehicle owners must still collect the annual inspection sticker and environmental protection sticker from the vehicle management office every two years. After 6 years, the vehicle must undergo an annual inspection. The process for motor vehicle inspection is as follows: 1. Bring your driver's license, ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy, then drive the vehicle to the vehicle management office or an authorized inspection station. 2. Fill out the motor vehicle annual inspection application form at the vehicle management office and pay the inspection fee. 3. After payment, proceed to the external inspection area where staff will check the vehicle's exterior. Ensure you have a fire extinguisher and a warning triangle ready. Once the external inspection is completed, proceed immediately to the on-site inspection. After the inspection is finished, collect the inspection pass form at the designated window. 4. Take the pass form to the specified window to receive the annual inspection sticker and the green environmental protection inspection pass sticker. The inspection process is then complete.
20
0
Share

How Long Can a Commercial Vehicle Be Used After Conversion to Non-Commercial Use?

The usable time after converting a commercial vehicle to non-commercial use is determined according to the mandatory scrapping regulations for commercial passenger vehicles. Below are the usage duration regulations for commercial vehicles and the scrapping age limits for vehicles that have changed their usage nature: Usage duration regulations for commercial vehicles: Mini commercial passenger vehicles can be used for 10 years, large or medium commercial passenger vehicles for 15 years, small or mini taxi passenger vehicles for 8 years, medium taxi passenger vehicles for 10 years, and large taxi passenger vehicles for 12 years. Scrapping age limits for vehicles that have changed their usage nature: When commercial passenger vehicles and non-commercial passenger vehicles are converted between each other, they must be scrapped according to the regulations for commercial passenger vehicles. When different types of commercial passenger vehicles are converted between each other, they must be scrapped according to their respective usage duration regulations. Small or mini taxi passenger vehicles and motorcycles that need to be transferred out of the province, autonomous region, or municipality where they are registered must be scrapped according to the stricter usage duration regulations. When hazardous material transport trucks and semi-trailers are converted to other types of trucks or semi-trailers, they must be scrapped according to the regulations for hazardous material transport trucks and semi-trailers.
13
4
Share

What to do if the headlight height of Trumpchi GA6 cannot be adjusted?

If the headlight height of Trumpchi GA6 cannot be adjusted, it may be due to rust on the fixing screws. Here are the steps to adjust the headlight height of Trumpchi GA6: 1. Find a wall and park the car 10 meters away from the wall; 2. Measure the height from the ground to the center of the headlight and the distance between the two headlights; 3. Place a horizontal masking tape on the wall 0.1 meters lower than the headlight height, ensuring the tape is at the exact center of the car; 4. Turn on the headlights and adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall; 5. Continue adjusting the vertical adjustment screw until the headlight beam is pointing straight forward.
13
3
Share

Is China 6 the same as China VI?

China VI is the China 6 emission standard. Here is an introduction to China 6: 1. Starting from July 1, 2019, China officially implemented the China 6 emission standard. The introduction of strict emission standards is to regulate automakers. Only by implementing stringent emission regulations can automakers be urged to develop engines with lower emissions. 2. From July 1, 2020, all sold and registered vehicles must comply with the China 6A standard; from July 1, 2023, all sold and registered vehicles must comply with the China 6B standard; some cities may implement the China 6 emission standard for light-duty vehicles as early as January 1, 2019.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.