What are the reasons why Renault's one-button start fails to ignite?

1 Answers
LePaige
07/29/25 3:39pm
Renault's one-button start fails to ignite for the following reasons: 1. The steering wheel is locked, causing failure to ignite: When parking, if the steering wheel is not straightened and is at a slightly larger angle (for example, more than 30 degrees), the steering wheel will automatically lock, which is an anti-theft measure. At this time, the key may not turn, resulting in failure to ignite. 2. The one-button start may encounter a low battery in the smart key: The key is in the car, but the instrument panel always displays 'key matching error'. This situation is due to the low battery of the smart key, and the start system cannot detect the weak radio wave emitted by the key.
Was this review help?
11
1
Share
More Forum Discussions

What is the tire specification for the Volvo XC60?

Volvo XC60 comes with three standard tire sizes. Below are the relevant details about the tire specifications for the Volvo XC60: 1. The 2.0T Momentum version uses tires with the specification 235/65-R17. 2. The 2.0T T5 Inscription version and the 2.0T T5 R-Design version use tires with the specification 235/60-R18. 3. The 2.0T Inscription version, 3.0T Inscription version, and 3.0T R-Design version use tires with the specification 235/55-R19, while the top-of-the-line 3.0T R-Design Sport version uses 255/45-R20.
20
0
Share

What Causes a Truck to Pull to One Side?

There are five main reasons why a truck may pull to one side: 1. Uneven tire pressure; 2. Uneven tire tread wear; 3. Inaccurate wheel alignment parameters; 4. Deformed or failed shock absorber springs; 5. Bent or deformed steering knuckle arms or steering knuckles. There are two common scenarios where a vehicle pulls to one side: 1. Steering wheel-related causes: Uneven tire pressure on the same axle causes the vehicle to pull toward the side with lower pressure, or uneven wheel height causes the vehicle to pull toward the lower side; 2. Alignment angle-related causes: A skewed rear axle creates a thrust angle, causing the vehicle to pull in the opposite direction of the thrust line. Uneven camber angles on the same axle cause the vehicle to pull toward the side with a larger camber angle.
5
3
Share

What are the first maintenance regulations for the 2021 Bora?

Here are the first maintenance regulations for the 2021 Bora: 1. The Bora 1.6L model requires its first maintenance when the mileage reaches 7,500-10,000 kilometers, with regular maintenance every 15,000 kilometers or 1 year. 2. The Bora 1.4TSI model requires its first maintenance when the mileage reaches 5,000 kilometers, with regular maintenance every 10,000 kilometers or 1 year. Here are more details about the 2021 Bora maintenance: 1. The new Bora comes with a two-year or 60,000-kilometer warranty, and the maintenance includes oil and oil filter replacement. 2. Within 60,000 kilometers, it is recommended for both models to replace the gasoline filter, air conditioning filter, and spark plugs every 30,000 kilometers. 3. The transmission oil should be replaced every 60,000 kilometers.
11
0
Share

What are the two items next to the clutch?

The two items next to the clutch are the accelerator pedal and the brake pedal. Here are detailed introductions: 1. Accelerator pedal: The accelerator pedal, also known as the throttle pedal, is mainly used to control the opening of the engine throttle, thereby controlling the power output of the engine. Traditional accelerator pedals are connected to the throttle via a throttle cable or linkage. With the continuous development of automotive electronic technology, electronic throttles are becoming increasingly widespread. When a driver steps on the accelerator pedal of an electronic throttle, it actually sends a throttle pedal position sensor signal to the engine ECU. 2. Brake pedal: The brake pedal is the pedal that limits power, i.e., the pedal of the foot brake (service brake), used for deceleration and stopping. It is one of the five major control components in car driving and is used very frequently. The driver's control ability directly affects the driving safety of the car.
10
5
Share

Can Plastic Scratches on Wheel Arches Be Repaired?

Yes, they can be repaired through gray polishing or grinding and polishing. Here are the relevant details: 1. Grinding and Polishing: Grinding and polishing involves smoothing the rough surface of plastic products. The polishing material can be processed using fine silicon dioxide powder of around 300 mesh. For transparent plastic products with low hardness, such as organic glass or polystyrene, an appropriate amount of green oil can be added to the material. If the surface requirements are not high, cleaning and drying after gray polishing or grinding and polishing can complete the process. 2. Wheel Arch: Wheel arch, short for car wheel arch, refers to the chrome trim along the upper edge of the tire, which is the semi-circular component protruding from the fender above the car tire.
14
1
Share

What is the Chinese meaning of BYD Song Pro?

BYD Song Pro can be understood as the high-end version of the BYD Song series. Below is some extended information: 1. What is Song: Song is one of the series under BYD, which also includes multiple series named after Chinese dynasties, namely Qin, Han, Tang, Song, and Yuan. 2. Information about BYD: BYD is currently one of the top-selling automakers in China, offering both fuel-powered and pure electric vehicles. Its pure electric vehicle technology is among the most advanced in the country. The BYD Song Pro is available in three different drive modes: fuel-powered, plug-in hybrid, and pure electric. In terms of naming conventions, many domestic car models now adopt a pattern of adding English letters after Chinese characters, such as Geely Boyue Pro, Arrizo GX Pro, and Qin Pro, all of which represent the high-end versions of their respective series.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.