What are the reasons why cruise control cannot be activated?

When will China VI emission standards be implemented?

China VI standards are divided into two phases, a and b. Starting from July 1, 2019 at the earliest, all light-duty vehicles sold and registered must comply with China VIa requirements; by July 1, 2023 at the latest, all light-duty vehicles sold and registered must meet China VIb limit requirements. This means that China VIa can only be considered a transitional phase, while China VIb represents the true China VI stage. More relevant information is as follows: 1. Currently, some regions have implemented China VI emission standards ahead of schedule. For example, Guangzhou implemented China VI emission standards for light-duty gasoline and diesel vehicles starting from March 1, 2019; Shenzhen required light-duty diesel vehicles to comply with China VI standards from July 1, 2018, and light-duty gasoline vehicles to meet China VI standards from July 1, 2019. 2. After the announcement of China VI standards, their extremely strict limit values earned them the title of "the most stringent standards in history." Compared to the current China V standards, China VI standards reduce carbon monoxide emissions by 50%, total hydrocarbon and non-methane hydrocarbon emission limits by 50%, and nitrogen oxide emissions by 42%. All indicators not only fully meet the current EU standards but even exceed them in some cases.

14

5

Share

What Causes Car Tail Lights to Stay On?

Car tail lights staying on is due to a short circuit in the brake light switch, which requires replacement. If the issue is not with the brake light switch, it may be a fault in the car's electrical system. Owners should not attempt to fix this themselves and should instead seek professional help at a 4S store or a specialized repair shop. Brake lights are typically installed at the rear of the vehicle to enhance the penetration of the light source, making it easier for following vehicles to detect braking even in low visibility conditions, thereby helping to prevent rear-end collisions. Brake lights illuminate when the vehicle brakes and are usually red, effectively preventing rear-end collisions and reducing traffic accidents. They are bright and highly visible, primarily serving to alert following vehicles. Incorrect use or malfunction of brake lights can easily lead to rear-end collisions. Additionally, when replacing brake light bulbs, note that vehicle tail lights often serve dual purposes—each bulb contains two filaments: a weaker one for the parking light and a stronger one for the brake light. Some manufacturers design these as high-low pin plug-ins for convenience, but care must be taken during replacement to avoid incorrect installation.

18

5

Share

What is a Keyless Start System?

A keyless start system (Keyless-Start-System) allows the vehicle to be started without physically using the key. Simply keep the key in your bag or pocket, then press a button inside the car or turn the ignition knob to start the engine. This system utilizes advanced Radio Frequency Identification (RFID) technology, automatically unlocking and locking doors via the chip embedded in the smart key. Below are details about the keyless start system's functions: 1. Locking/Unlocking Doors: When the key is within the effective detection range of about 1.5 meters from the driver's door, the key chip's ID automatically matches the engine's ID. Upon successful pairing, the car doors unlock without requiring the key. When the driver leaves the vehicle, the doors automatically lock and activate the anti-theft system. If the smart key's battery is depleted, the door handle features a touch-sensitive button and a traditional keyhole as a backup. 2. Starting/Stopping the Vehicle: Upon entering the car, the onboard detection system recognizes the smart key. After verification, the vehicle's computer activates, allowing the engine to start by pressing the one-touch start button (or turning the knob). To stop the engine, simply press the start button (or knob) again after the vehicle comes to a complete halt.

15

3

Share

Is Fender Soundproofing Effective?

Fender soundproofing has minimal effect, but fender liner soundproofing is effective. Below the fender, above the wheel, there is a black plastic piece called the fender liner. This component prevents mud, water, or stones kicked up by the tires from entering the engine compartment. Many high-end luxury cars have some soundproofing design in their fender liners. When driving, most of the noise comes from wind and tire noise. If the car has a high drag coefficient, wind noise will be more noticeable at high speeds. To reduce noise, you can also install door soundproofing foam, which can block most of the noise.

9

1

Share

What are the front and rear position lights on a vehicle?

Front and rear position lights on a vehicle refer to the lights that indicate the vehicle's position, also known as width marker lights. When illuminated, they outline the vehicle's silhouette. These lights are primarily used during dusk, overcast days, or in rainy/foggy conditions to display the vehicle's width and height, helping other drivers judge relative positions and vehicle dimensions during passing or overtaking maneuvers. Typically, position lights are white at the front and red at the rear. Other commonly used vehicle lights include: 1. Headlights - installed on both sides of the vehicle front for road illumination during nighttime driving; 2. Turn signals - activated when changing direction to alert surrounding vehicles and pedestrians.

15

1

Share

Should the front windshield film be applied on the inside or outside of the car?

Front windshield films are always applied on the inside. If applied on the outside, exposure to wind and rain would reduce its lifespan by at least two-thirds. Moreover, if applied externally, glass fragments from impact could still injure people, failing to serve the purpose of explosion-proof film. Car window tinting refers to applying a thin film material (also called solar film or heat insulation film) on the front/rear windshields, side windows, and sunroof. The primary functions of car window films include: blocking UV rays, reducing heat transmission, preventing injuries from glass shattering, reducing glare, and protecting personal privacy through the one-way visibility feature of solar films.

14

0

Share

What are the reasons why cruise control cannot be activated?

When will China VI emission standards be implemented?

What Causes Car Tail Lights to Stay On?

What is a Keyless Start System?

Is Fender Soundproofing Effective?

What are the front and rear position lights on a vehicle?

Should the front windshield film be applied on the inside or outside of the car?

What does 98W on a tire represent?

What is the correct method for one-button start in a manual transmission car?

Does Engine Oil Have a Shelf Life?

Can a 400cc Motorcycle Be Licensed?