What are the reasons why an automatic transmission car can start but not move?

What are the precautions for breaking in a new car?

There are four main precautions for breaking in a new car. Below is a detailed introduction to the precautions for breaking in a new car: 1. Proper warm-up: Proper warm-up helps the engine oil form an "oil film" between engine components, thereby reducing wear on engine parts. 2. Timely gear shifting: When driving a manual transmission model during the break-in period, shift gears promptly and appropriately to avoid incorrect behaviors such as high gear with low RPM or low gear with high RPM, and do not use a single gear for an extended period. 3. Timely maintenance: Follow the manufacturer's recommendations in the vehicle manual, and after reaching a certain mileage or time, promptly conduct vehicle inspection and maintenance, replace engine oil, oil filter, etc., and thoroughly inspect the chassis system. 4. Pay attention to the condition of the engine oil: During the break-in period, the engine is in a critical phase of "gradual adaptation," and the tiny metal particles generated during the operation of its components will mix into the engine oil. If the engine oil is not replaced in time, it will increase engine wear.

3

2

Share

Does Beidou Parking Require Turning Off the Engine?

After parking, the dashcam does not need to be unplugged from the power source, as dashcams come with collision detection. The dashcam will automatically shut off after the engine is turned off. Additionally, if it is plugged into the cigarette lighter port, there will be no power if the ACC state is not activated. However, for peace of mind, it is best to unplug it. Below are the functions of a dashcam: 1. Protecting the driver's legal rights: For pedestrians, bicycles, and motorcycles that cross the road, the dashcam can prevent the driver from being extorted in the event of a collision, serving as effective evidence for the driver. 2. Facilitating the determination of accident liability: In the event of an accident, replaying the recorded footage makes the responsibility clear, helping traffic police handle the accident quickly and accurately. It also allows for the quick removal of vehicles from the scene, facilitating traffic recovery while preserving valid evidence. This creates a safe and smooth traffic environment and ensures fairness. 3. Serving as a deterrent to reduce accident rates: With a dashcam in place, drivers are less likely to drive recklessly, significantly reducing the incidence of accidents. Even in the event of a hit-and-run, the dashcam can capture relevant information about the offending vehicle, greatly reducing hit-and-run cases. 4. Providing evidence for insurance claims: If compensation for traffic accident damages needs to be determined by court judgment, the dashcam can provide evidence, making sentencing and compensation more accurate. 5. Effectively preventing fraud: In cases of professional fraud or roadside robbery, the dashcam can record the scene of the incident and the appearance of the perpetrator, providing crucial evidence for solving the case. 6. Recording life experiences: Many car owners now enjoy self-driving tours and can use the dashcam to document their journeys—whether smooth and scenic or rough and muddy—each experience is a valuable memory.

4

1

Share

What are the reasons why the Vezel remote key cannot lock the car?

The reasons why the car door cannot be locked include remote lock failure, strong magnetic signal interference around the car, and radio signal jammers. 1. Remote lock failure: If you are using the remote key to lock the door, it is likely that the remote lock is malfunctioning or the antenna of the car's remote transmitter has aged, causing the remote key to not work. In this case, you can use the spare mechanical key to lock the car. 2. Strong magnetic signal interference around the car: Another possibility is strong magnetic signal interference around the car. Since smart keys use low-intensity radio waves, they cannot function properly under magnetic interference. 3. Radio signal jammers: If there is a specific location where the remote lock frequently fails to work, the car owner should be wary of door jammers. Some criminals use radio signal jammers that emit electromagnetic waves at the same frequency as the car lock signal, thereby blocking the electronic code of the car's central lock and temporarily disabling it.

8

5

Share

What grade of gasoline should a Maserati use?

Maserati should use 95-octane gasoline, as this fuel grade is recommended in the vehicle's official owner's manual. In addition to checking the appropriate gasoline grade in the owner's manual, you can also find it indicated on the fuel tank cap. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline is recommended. However, with the use of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade. High-compression engines can also be tuned to use lower-octane gasoline, as factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If a Maserati occasionally uses the wrong gasoline grade, simply switch back to the correct grade after use. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles requiring a lower octane, using a higher octane gasoline will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles requiring a higher octane, using a lower octane gasoline can cause engine knocking. Due to the significantly lower octane rating, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is generated during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

7

0

Share

What are the Mercedes-Benz models available for around 300,000 RMB?

Mercedes-Benz offers a wide range of models. Among the recommended models priced around 300,000 RMB are the Mercedes-Benz GLB, Mercedes-Benz GLA, and Mercedes-Benz GLC, each with its own unique characteristics, including coupe, boxy, and rounded designs. The interior craftsmanship and materials are of high quality, making all three models worth considering. Mercedes-Benz is one of Germany's premium automotive brands, renowned for its perfect technical standards, rigorous quality benchmarks, innovative capabilities, and a series of classic coupe models. Below is an introduction to each model: 1. Mercedes-Benz GLB: Built on the MFA2 platform, the GLB is a must-consider option if you're looking for a 300,000 RMB Mercedes-Benz SUV. It features a combination of chrome grille trim and a black mesh, along with a dual-horizontal grille design and a boxy exterior. Although positioned as a compact SUV, its dimensions lead its class. The interior includes a digital instrument panel and three turbine-style air vents, exuding a premium feel. It is powered by a 1.3T turbocharged engine paired with a 7-speed dual-clutch transmission. 2. Mercedes-Benz GLA: The GLA has a crossover-like appearance with a dynamic and stylish design, combining simplicity with a high-tech feel. The front fascia is sporty and robust, featuring a large chrome-trimmed lower air intake. The side waistline and rear U-shaped light clusters complement each other, enhancing its sporty appeal. The dashboard design is layered, with circular air vents and a cannon-style instrument panel that boosts the driver's enthusiasm. It comes with either a 1.3T or 2.0T turbocharged engine, mated to a 7-speed dual-clutch transmission. 3. Mercedes-Benz GLC: The GLC is Mercedes-Benz's first crossover model, essentially a coupe version of the GLK. Its three-dimensional lines create unique light and shadow effects, while the family-style headlights and taillights convey a strong sporty vibe. The interior features a floating central display and family-style circular air vents, along with extensive wood trim and stitching, giving a luxurious impression. It is powered by a 2.0T turbocharged engine in high and low power versions, paired with a 9-speed automatic transmission.

6

5

Share

What gas is inside an airbag?

The primary gas inside an airbag is nitrogen, which exists in a solid form called sodium azide. During a severe collision, the solid sodium azide in the airbag rapidly decomposes to release nitrogen gas, inflating the airbag and allowing it to fully deploy. Nitrogen is non-toxic and odorless, and since it is the main component of air, it poses no harm to humans. The noise level during airbag deployment is approximately 130 decibels, which is within the tolerable range for humans. The powder released during deployment is a lubricating powder that prevents the folded airbag from sticking together and is also harmless to humans. Due to these properties, nitrogen is well-suited as the main component of airbags, ensuring passenger protection during vehicle accidents. An airbag system is a passive safety protection system (see vehicle safety performance) that, when used in conjunction with seat belts, provides effective collision protection for occupants. The airbag distributes impact forces evenly across the head and chest. The Supplemental Restraint System (SRS), commonly known as the airbag, serves as an auxiliary device to the seat belt's occupant restraint system. It includes components such as sensor assemblies, inflators, folded airbags, igniters, solid nitrogen, and warning lights. Vehicle test data indicate that deploying airbags during a collision can reduce the likelihood of head injuries by about 25% and facial injuries by approximately 80%. Sensors and microprocessors assess the severity of a crash, transmitting and sending signals. The gas generator then ignites solid fuel based on these signals, producing gas to inflate the airbag. The airbag is housed within the steering wheel hub, close to the cushion, with a capacity ranging from 50 to 90 liters. The fabric used for airbags has high tensile strength, typically made of nylon, and is coated with dry powder to prevent sticking during deployment. To prevent gas leakage, the inner layer of the airbag is coated with sealing rubber. Additionally, a safety valve is installed to release excess gas if pressure exceeds a certain threshold, avoiding injury to passengers. A typical airbag system consists of two main components: a collision detection ignition device (or sensor) and a gas-generating airbag (or air cushion). When the sensor switch is activated, the control circuit begins operation, using detection loops to determine if a collision has occurred. The airbag deploys only if signals are received simultaneously from two sensors. Since the vehicle's generator and battery are usually located in the front, the airbag control system includes a backup power supply to ensure functionality. Once deployment conditions are met, the control circuit sends current to the igniter, rapidly heating it to ignite the sodium azide propellant. The airbag system primarily consists of four parts: collision sensors, the airbag control unit (ACU), the SRS indicator light, and the airbag module. Collision sensors: These are the main input devices for control signals in the airbag system. They detect the intensity of a collision and transmit the signal to the ACU, which determines whether to trigger the inflator. Most systems include 2–4 collision sensors, typically installed on the front left and right fenders, the front bumper, and sometimes inside the cabin. Most collision sensors use an inertial mechanical switch structure. Collision sensors comprise a housing, eccentric rotor, eccentric weight, fixed contacts, and rotating contacts. A resistor (R) is also fixed outside the sensor to check for open or short circuits in the wiring between the ACU and the front collision sensor during system self-tests. Under normal conditions, the eccentric rotor and weight are held against a stopper by a spring, keeping the contacts open ("OFF"). During a collision, the weight's inertia causes the rotor to overcome the spring force, closing the contacts ("ON") if the impact exceeds a set threshold. The ACU triggers the inflator only upon receiving an "ON" signal. Some vehicles also include side airbags, which require additional side collision sensors. Airbag control unit (ACU): The ACU is the system's control center, receiving signals from collision and other sensors to determine whether to deploy the airbag. It also performs self-diagnostics. The ACU continuously tests critical circuits (e.g., sensor circuits, backup power, ignition circuits, and the SRS indicator) and displays results via the SRS light and fault codes stored in memory. The dashboard SRS light informs the driver of the system's status. Fault codes can be retrieved using specialized tools or through a serial interface for inspection. Signal processing circuits, consisting of amplifiers and filters, shape, amplify, and filter sensor signals for the ACU to process. The airbag system has two power sources: the vehicle's main power (battery and alternator) and a backup power (capacitors). The backup power ensures system operation for about 6 seconds if the main power is cut during a collision, allowing the ACU to function and the igniter to deploy the airbag. Beyond 6 seconds, the backup power's capacity diminishes, potentially preventing deployment. Protection circuits guard against voltage spikes from inductive loads or switches in the vehicle's electrical system, while voltage regulation circuits ensure stable operation despite power fluctuations. SRS indicator: This light, labeled "SRS" or "AIRBAG" on the dashboard, indicates system status. It should illuminate briefly (about 6 seconds) when the ignition is turned on, confirming normal operation. If it stays on, fails to light, or activates while driving, a fault exists, and diagnostics are needed. Fault codes stored in memory aid in troubleshooting, though codes may be unavailable after airbag deployment, necessitating ACU replacement. Airbag module: This non-serviceable unit, installed in the steering wheel or dashboard, combines an inflator (with a squib, igniter powder, and gas generant) and a nylon airbag lined with resin. During a collision, sensors trigger the ACU to activate the squib, igniting the gas generant. The resulting gas, cooled by a filter, inflates the airbag, which bursts through its cover to cushion occupants. A clock spring (spiral cable) connects the squib to the ACU, allowing steering wheel rotation. In summary, the airbag system is a passive safety measure that, alongside seat belts, distributes crash forces to protect occupants. The SRS includes sensors, an ACU, an indicator, and airbag modules to ensure effective deployment during collisions.

15

1

Share

What are the reasons why an automatic transmission car can start but not move?

What are the precautions for breaking in a new car?

Does Beidou Parking Require Turning Off the Engine?

What are the reasons why the Vezel remote key cannot lock the car?

What grade of gasoline should a Maserati use?

What are the Mercedes-Benz models available for around 300,000 RMB?

What gas is inside an airbag?

What does car coating mean?

Is fingerprint recording still required for obtaining a driver's license in 2021?

Does Buying a Car Come with Lifetime Maintenance?

How to Use a Car USB Drive?