What are the reasons why a gasoline generator fails to generate electricity?

1 Answers
StAndres
07/29/25 8:31pm
Reasons why a gasoline generator fails to generate electricity: Failure to operate as required: The generator is not operating under the specified technical conditions, such as excessively high stator voltage, which increases iron loss, or excessive load current. The monitoring instruments should be checked to see if their readings are normal. If not, necessary adjustments and corrective measures should be taken to ensure the generator operates under the specified technical conditions. Unbalanced load current: If the three-phase load current of the generator is unbalanced, the overloaded phase winding will overheat. If the difference between the three-phase currents exceeds 10% of the rated current, it is considered a severe phase current imbalance. An unbalanced three-phase current generates a negative-sequence magnetic field, increasing losses and causing heating in components such as the pole windings and retaining rings. The three-phase load should be adjusted to balance the currents as much as possible. Blocked air ducts: Dust accumulation in the air ducts obstructs ventilation, making it difficult for the generator to dissipate heat. The dust and oil deposits in the air ducts should be cleaned to ensure unobstructed airflow.
Was this review help?
5
2
Share
More Forum Discussions

What are the reasons for rapid engine oil consumption?

The reasons for rapid engine oil consumption: 1. Normal wear: This is a normal phenomenon after the vehicle has been driven for a certain mileage. Generally, vehicles experience this around 200,000 kilometers. Different cars, different usage habits, and different regions (dust content in the air) can significantly affect the engine's lifespan. For vehicles that exceed a certain age or mileage, normal wear requires timely major repairs. 2. Abnormal wear: Causes of abnormal wear include early wear due to product quality issues or improper usage. If the vehicle exhibits oil burning during the warranty period, promptly contact the manufacturer's 4S store for repair or engine replacement. 3. Reasons for early engine wear include: 1. Use of substandard engine oil. 2. Failure to change the oil and oil filter on time. 3. Starting the engine with a heavy throttle when cold.
9
0
Share

How long after the expiration date is a driver's license considered expired?

A driver's license is considered expired even one day after its validity period. You can apply for a new license within 90 days before the expiration date. Additional information is as follows: I. Renewal Regulations: 1. Renewal should be processed within 90 days in advance, and it can also be processed normally within one year after expiration. 2. If the license has been expired for more than one year but less than three years, you can renew it by passing the subject one exam. 3. If it has been expired for more than three years, the license will be invalidated, and driving is not allowed during the overdue period. II. Required Documents for Renewal: 1. Identity proof and its copy. 2. The original driver's license and its copy. 3. Three recent one-inch white-background color photos (excluding photos for physical condition proof).
18
1
Share

Are Flood-Damaged Vehicles Mandatorily Scrapped by the State?

Flood-damaged vehicles are not mandatorily scrapped by the state. Here is relevant information about flood-damaged vehicles: 1. Definition: Flood-damaged vehicles refer to those that have been submerged in water, typically involving the engine and transmission being soaked, with water levels exceeding the wheels and vehicle seats, and prolonged contact between the vehicle's underbody components and water. 2. Hazards of Flood-Damaged Vehicles: The dangers of water-submerged vehicles are significant. If a vehicle is submerged, it can easily lead to rusting of body components, shortening its service life and reducing safety performance. For example, water damage can cause corrosion and rusting of the vehicle's wiring, leading to sudden engine shutdown or spontaneous combustion due to short circuits while driving, with unimaginable consequences.
4
0
Share

Is the Difficulty of Subject 2 Driving Test Greater on Rainy Days?

Taking the Subject 2 driving test on a rainy day can have certain impacts, such as reduced visibility and slippery roads. However, don't worry too much, as the invigilators will assist by wiping the windows while you drive, minimizing the interference caused by the rain. Precautions for taking the Subject 2 test on rainy days: 1. Maintain a good mindset: When encountering rainy conditions during the test, avoid negative emotions or excessive nervousness. Candidates must adjust their mindset and stay optimistic. 2. Pre-test preparations: Rain can blur the side mirrors, so candidates should wipe them clean before getting into the car to ensure clear visibility during the test. Also, shake off any mud or water from your shoes to prevent slipping when operating the pedals. On rainy days, wheels are prone to skidding. Therefore, candidates should control their speed during the test, driving slower than during regular practice.
18
0
Share

What are the requirements for applying for a driver's license?

Driver's license application requirements are as follows: 1. Height: For large buses, tractors, city buses, large trucks, and trolleybuses, the height requirement is 155 cm or above. For medium-sized buses, the height requirement is 150 cm or above. 2. Vision: For large buses, tractors, city buses, large trucks, trolleybuses, or trams, the naked or corrected vision in both eyes must be 5.0 or above. For other vehicle types, the naked or corrected vision in both eyes must be 4.9 or above. 3. Color vision: No red-green color blindness. 4. Hearing: Must be able to distinguish the direction of sound sources with each ear 50 cm away from a tuning fork. Those with hearing impairments who can meet the above conditions with hearing aids can apply for a motor vehicle driver's license for small cars or small automatic transmission cars.
11
2
Share

What does the emergency stopping and passing bay sign harbor-style refer to?

Emergency stopping bays and passing bay sign harbor-style have the following meanings: 1. Emergency stopping bay: Refers to a temporary stopping area on highways and first-class roads, designated for vehicles that encounter sudden malfunctions or other emergencies requiring immediate parking. 2. Passing bay sign harbor-style: Refers to a widened section of road on single-lane roads, within a visible distance, designed for vehicles to pass each other by moving aside. 3. Differences: The number of lanes differs. A passing bay is a widened section on a single-lane road, whereas an emergency stopping bay is found on highways, which do not have single-lane sections. Usage varies. Passing bays are used for vehicles to pass each other by moving aside, while emergency stopping bays are primarily for emergency parking.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.