What are the reasons why a car's air conditioning is not cooling well?

2 Answers
MarianaDella
07/24/25 2:24am
Reasons why a car's air conditioning is not cooling well: 1. Excessive refrigerant, leading to reduced cooling effect; 2. Excessive impurities in the refrigerant and lubricating oil, causing minor blockages; 3. Insufficient refrigerant, lack of refrigerant; 4. Dirty condenser, loose compressor drive belt. Car air conditioning refers to the air conditioning device installed in a car, which can cool, heat, ventilate, and purify the air inside the compartment, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. It generally includes cooling devices, heating devices, and ventilation devices. This combined device makes full use of the limited space inside the car, with a simple structure and easy operation.
Was this review help?
2
5
Share
LeHarmony
08/10/25 10:03pm
There are quite a few possible reasons why a car's air conditioning isn't cooling well. Having driven for many years, I've encountered this issue. Insufficient refrigerant is a common main cause—aging pipes or damaged seals can lead to Freon leaks, reducing the AC's heat absorption efficiency. Compressor issues are also critical; a loose or worn belt can cause compression failure, preventing refrigerant circulation. Additionally, if the fan isn't spinning or rotates too slowly, poor heat dissipation prevents cool air from blowing out. Another factor is a dirty condenser blocking heat exchange or a clogged filter obstructing airflow. I recommend regularly checking the refrigerant system pressure and visiting a professional shop for Freon refills and leak tests, which can save a lot of hassle. Poor cooling while driving severely affects comfort, especially during long summer trips, so timely repairs are essential to avoid risks.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

How to Turn on the Honda Avancier Cornering Light?

The method to turn on the Honda Avancier cornering light is: simply turn on the vehicle's low beam headlights, and it will automatically activate. The cornering light refers to a separate set of bulbs that illuminate on one side when the driver turns the steering wheel, assisting in lighting up the blind spots on the curve. Once the steering wheel is straightened, the single-side cornering light will automatically turn off. The dimensions of the Honda Avancier are: length 4858mm, width 1942mm, height 1670mm, with a wheelbase of 2820mm and a trunk capacity of 510 liters. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 142kW at 5600 rpm and a maximum torque of 243Nm.
8
1
Share

How often should the Lavida be serviced?

The Lavida should be serviced every six months or 5,000 kilometers. Maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car maintenance. Its purpose is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life. The Lavida's body dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm. It is equipped with a 1.4L turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 110 kW and a maximum torque of 250 Nm.
19
3
Share

What is the difference between a foot brake and a handbrake in a car?

The difference between a car's foot brake and handbrake lies in their positions: the foot brake is located on the left side below the steering wheel, while the handbrake is situated next to the gear shift. The foot brake consists of components such as the pedal, master cylinder, vacuum pump, oil pipe, wheel cylinder, brake pads, brake disc, and ABS pump. Its function is to decelerate the vehicle while driving or to prevent the vehicle from rolling after stopping. The handbrake is an extremely important component of the vehicle's braking system. Its functions include: 1. Keeping the car stationary and preventing it from rolling downhill when parked; 2. Assisting in drifting effects when turning while driving by pulling the handbrake; 3. Serving as an emergency brake in critical situations.
3
4
Share

Is the BMW Li imported or domestically produced?

BMW Li is domestically produced. The Li designation indicates a domestically manufactured gasoline-powered long-wheelbase version. Taking the 2021 BMW 525Li as an example, it is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of: length 5106mm, width 1868mm, height 1500mm, and a wheelbase of 3105mm. The 2021 BMW 525Li is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 N·m. It features rear-wheel drive with front double-wishbone independent suspension and rear multi-link independent suspension.
9
5
Share

What is the normal range for tire pressure monitoring values?

Tire pressure monitoring values are considered normal between 2.2 and 2.5 bar. Values that are too high or too low may trigger alarms and affect driving safety. Tire pressure refers to the air pressure inside the tire, and its level plays a crucial role in the performance and power of the vehicle. The effects of excessively high tire pressure are: 1. Reduced friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates wear on the central tread pattern, shortening tire lifespan. The effects of excessively low tire pressure are: 1. Increases the friction coefficient with the road surface; 2. Makes the steering wheel heavy and prone to deviation; 3. Increases movement in various parts of the tire, leading to abnormal heating due to excessive rolling.
9
3
Share

How to Install Car Mudguards?

Car mudguards installation method is: 1. Prepare mudguards corresponding to the car model, pliers, screwdriver, matching screws and nuts in advance; 2. Clean the installation position with a damp cloth for easy removal; 3. Locate the reserved screws and nuts on the vehicle, remove them directly with tools, and take off the original mudguards; 4. Adjust the position of the new mudguards, use tools to screw the screws into the screw holes in sequence, and install them; 5. The remaining three can be installed following the above steps. Mudguards are plate structures installed behind the wheel outer frame, usually made of high-quality rubber material, and some are made of engineering plastic.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.