What are the reasons for weak car power?

Which Side Has Priority When Two Left-Turn Lanes Turn Simultaneously?

The vehicle on the right has priority when two cars turn left simultaneously. Here are the specific details: 1. When two cars turn left at the same time, if there are no lane markings at the curve, theoretically, it should be handled as 'simultaneously changing lanes toward the middle lane,' so the principle of 'left vehicle yields to the right vehicle' should be followed. 2. Yield to straight-going vehicles: When turning, whether left or right, you must yield to straight-going vehicles. Do not assume that just signaling and continuing the turn is sufficient. If the straight-going vehicle is moving quickly and a collision occurs, you will be fully at fault. 3. Yield to left-turning vehicles: At an intersection, if you are turning right and the opposing vehicle is turning left, you must yield to the left-turning vehicle. This is because left turns are more difficult and occupy more road resources. In comparison, right turns are easier, so right-turning vehicles should yield to left-turning ones.

8

3

Share

How many points are deducted for stopping midway during parallel parking?

Stopping midway during parallel parking results in a deduction of 100 points. Parallel parking penalty rules: After the vehicle stops in the parking space, if the body crosses the line, it is disqualified; stopping midway is disqualified; if the tires touch or press the lane boundary line while moving, 10 points are deducted; failing to turn on the left turn signal when starting, 10 points are deducted; failing to turn on the right turn signal when reversing, 10 points are deducted; not parking within the garage space results in disqualification. Related requirements: The operational requirement for parallel parking is to stop the car in front of the garage space, then reverse into the space in one go without stopping midway, and the wheels must not touch or press the lane boundary lines or the parking space lines; compared to reverse parking and slope parking and starting, it is relatively simpler, and as long as the reference points are aligned correctly, there generally won't be major issues. Common reasons for point deductions: The speed is too slow. Although the driving test for Subject 2 repeatedly emphasizes going slow, many trainees, fearing nervousness and missing reference points, reduce the speed excessively, leading to stalling; unfamiliarity with the clutch. Not testing the clutch's tightness before driving leads to discomfort during the test; incorrect seat adjustment. If the seat is not adjusted accurately, the candidate's sitting posture and field of vision will be affected, making it easy to misalign reference points, resulting in pressing the lines; right turn signal. Previously, only the left turn signal was required when starting to park, but after the new regulations, many people forget to turn on the right turn signal before reversing, leading to point deductions.

15

2

Share

How Often Should the China VI Particulate Filter Be Cleaned?

There is no specific cleaning interval for the particulate filter. Cleaning is required when the particulate filter malfunction indicator light on the dashboard illuminates. Particulate Filter Cleaning Method: First, remove the particulate filter and place it on the testing equipment. Use the probe on the device to check the clogging condition of the particulate filter. Then, preheat the cleaning equipment to 300 degrees Celsius, place the particulate filter inside, and adjust the temperature to 600 degrees Celsius for carbon deposit oxidation treatment. After the treatment is completed, cool the particulate filter and then use a high-pressure purging tool for purging. Once cleaning is finished, record the particulate filter's data using professional measuring equipment. After completing the above steps, reassemble the particulate filter and install it back into the vehicle. Function of the Particulate Filter: The particulate filter can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation.

3

4

Share

Can You Use 92 Octane Gasoline After Using 95 Octane?

Two types of gasoline have different iso-octane content, and some other component contents are also different, so they cannot be mixed together. The following is an introduction to gasoline: 1. Gasoline is a volatile and flammable hydrocarbon mixture liquid distilled and cracked from petroleum, which can be used as fuel. 2. It appears as a transparent liquid, is flammable, with a distillation range of 30°C to 220°C, and mainly consists of C5-C12 aliphatic hydrocarbons and naphthenic hydrocarbons, as well as a certain amount of aromatic hydrocarbons. 3. Gasoline has a high octane number (anti-knock combustion performance) and is divided into grades such as 89, 90, 92, 93, 95, 97, and 98 according to the octane number.

9

3

Share

Does the Elantra have sensor failure issues?

The Elantra may experience sensor failure issues. Automotive sensors serve as input devices for the vehicle's computer system, converting various operational parameters such as speed, temperature of different mediums, and engine operating conditions into electrical signals transmitted to the computer, ensuring the engine operates in its optimal state. The detection methods for automotive sensors are as follows: 1. Unplug the connector, turn the key to the second position, and use a voltmeter to measure and confirm that the power line has voltage output. 2. Use a multimeter to identify the ground wire. With the voltage setting, connect one probe to the confirmed power line and the other probe to the remaining two wires. The wire that shows voltage is the ground wire, and the remaining one is the signal wire. 3. Then, turn off the ignition, disconnect the signal wire, reconnect the connector, start the engine, and measure the voltage between the signal wire and the ground wire. There should be a signal voltage output, which should be less than the supply voltage. If there is no voltage, the sensor is likely damaged.

8

4

Share

Should You Turn Earlier or Later When the Seat is Lower?

You should turn earlier when the seat is lower. Notes on seat adjustment: 1. Sitting posture: Sit as far back as possible until you reach the junction of the seat cushion and backrest, which ensures a more stable position and reduces shaking. 2. Legs: With your left foot fully depressing the clutch and your right foot on the brake, your legs should not be fully extended; keep your knees slightly bent to maintain strength. Adjust the seat forward or backward to achieve this position. Sitting too far back may prevent you from fully depressing the clutch or reduce braking power, while sitting too close may cause your knees to hit the dashboard, affecting operation. 3. Arms: Rest your hands naturally on the steering wheel, with your wrists just above the top of the wheel. Sit upright and adjust the seat backrest to support your lower back, typically at an angle close to or equal to 90 degrees. 4. Head: Adjust the seat height so that there is at least a fist's distance between your head and the roof. Shorter individuals can use a seat cushion for additional height if needed.

1

2

Share

What are the reasons for weak car power?

Which Side Has Priority When Two Left-Turn Lanes Turn Simultaneously?

How many points are deducted for stopping midway during parallel parking?

How Often Should the China VI Particulate Filter Be Cleaned?

Can You Use 92 Octane Gasoline After Using 95 Octane?

Does the Elantra have sensor failure issues?

Should You Turn Earlier or Later When the Seat is Lower?

What kind of oil should be used for Octavia?

What to Do If the First Maintenance Is Overdue?

What do bore and stroke mean?

What happens when the valve spring tension is insufficient?