What are the reasons for water under the co-driver and rear floor mats?

Can a driver's license physical examination conducted in another location be uploaded online?

A driver's license physical examination conducted in another location can be uploaded online. The examination information is interconnected nationwide, allowing submission from different locations without the need for manual upload or import, as the system automatically synchronizes the data. Note that when applying for a driver's license renewal upon expiration via the Traffic Management 12123 platform, you must undergo a physical examination at a designated hospital. The hospital will upload the examination information before you can proceed with the relevant application. Online upload process for a driver's license physical examination conducted in another location: First, select the "Submit Driver's License Photo" option under the driver's license services section. Upload a compliant driver's license photo for the production of the new license. Detailed photo requirements can be found in the system prompts. After uploading the photo, staff will complete the review within the specified time frame. Then, select "Renew Expired Driver's License" to initiate the renewal application. Applicants must read the service instructions and declaration content, confirm personal information, fill in the mailing address, and enter the verification code to complete all steps. After processing the application, the newly issued driver's license will be mailed to the specified address within 3 working days. The applicable license production fee and mailing fee will be collected upon delivery. Driver's physical examination periods: C1 driver's license: C1 licenses do not require annual review. Generally, a physical examination is needed within 90 days before the license expires, followed by renewal procedures. A and B class driver's licenses: A and B licenses require annual reviews, including physical condition checks. If no points are deducted within a scoring cycle, the review may be waived, but a physical examination report must be submitted every two years.

17

1

Share

What Causes Low Idle Speed in Motor Vehicles?

Low idle speed in motor vehicles may be caused by excessive carbon buildup in components such as the throttle body, idle air control valve, intake valves, intake manifold, combustion chamber, spark plugs, and fuel injectors. This carbon accumulation can block idle passages, causing the idle air control valve to stick or exceed its adjustment range, resulting in low idle speed, unstable idle, or engine stalling when releasing the throttle. Below are four common causes of unstable idle speed: 1. Intake manifold or valve leaks: When unauthorized air, fuel vapors, or exhaust gases enter the intake manifold, it leads to excessively rich or lean air-fuel mixtures, causing abnormal combustion. If the leak affects only specific cylinders, the engine may experience severe shaking, particularly during cold starts. Common causes include: loose intake manifold clamps or cracked hoses, leaking intake manifold gaskets, damaged intake manifolds or holes worn by other components, leaking O-rings on fuel injectors, disconnected or broken vacuum lines, excessive opening of the PCV valve, stuck-open charcoal canister valves, or faulty EGR valves. 2. Excessive carbon deposits in throttle body and intake passages: Carbon buildup in the throttle body and surrounding intake passages alters the air passage cross-section, preventing the ECU from precisely controlling idle airflow, resulting in improper combustion. Common causes include: oily or carbon-fouled throttle bodies, carbon deposits in intake passages near the throttle body, or contamination in idle stepper motors, duty cycle solenoids, and rotary valves. 3. Faulty idle air control components: Malfunctions in idle air control components lead to inaccurate idle air regulation. Common causes include: damaged or sticking throttle motors, faulty idle stepper motors, duty cycle solenoids, or rotary valves. 4. Incorrect air intake measurement: The ECU receives erroneous signals and issues incorrect commands, causing improper idle air control and abnormal combustion. This represents an indirect cause of unstable idle. Common causes include: faulty mass airflow sensors or their circuits, defective intake pressure sensors or their circuits, or poor ECU connector contact due to moisture ingress or internal ECU faults.

9

4

Share

Can I Apply for a Replacement Driver's License on 12123 If It's Lost?

You cannot apply for a replacement driver's license on 12123 if it's lost. In case of a lost driver's license, you should visit the local vehicle management office (anywhere is acceptable). According to national regulations, if an motor vehicle driver's license is lost, the driver should apply for a replacement at the vehicle management office where the license was originally issued or any other vehicle management office outside the issuing area. When applying, you need to fill out an application form and submit the driver's identity proof along with a written statement declaring the loss of the driver's license. If the application meets the requirements, the vehicle management office will issue a replacement driver's license within one day. Materials required for driver's license replacement include: identity proof (the driver's identity proof), application form (motor vehicle driver's license application form), photos (four one-inch color front-facing photos with a white background and no hat), original and photocopy of identity proof (if applying through an agent, the agent's original and photocopy of identity proof are also required). In case of a lost motor vehicle driver's license: you should apply for a replacement at the vehicle management office where the license was originally issued or any other vehicle management office outside the issuing area. Brief introduction: A driver's license, also known as a "driving license," is a document issued by the government's transportation department to individuals who qualify to drive. It is usually a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. Regarding the issue of reporting the loss: There is no need to report the loss of a driver's license. You only need to promptly apply for a replacement at the vehicle management office. However, when applying for a replacement, you need to fill out a written statement declaring the loss of the motor vehicle driver's license, confirming that the license is indeed lost and stating that any improper consequences arising from the lost license in the future are unrelated to the vehicle owner. After the replacement is completed, the original driver's license, even if found, will be considered invalid.

18

4

Share

What can be used to wash a car at home?

You can use dishwashing liquid, laundry detergent, or car wash soap to wash your car at home. The specific details are as follows: Dishwashing liquid for car washing: The main ingredient of dishwashing liquid is primarily sulfonic acid, and most dishwashing liquids are alkaline products. Although some dishwashing liquids are neutral, long-term use can harm your hands, such as causing peeling. Laundry detergent for car washing: Due to its strong alkalinity, the pH value of laundry detergent far exceeds what car paint can tolerate. The suitable pH range for car paint is approximately 6.5-6.8, while the pH of laundry detergent generally exceeds 10. Additionally, laundry detergent often contains a large amount of inorganic salts, such as sodium silicate, soda ash, and anhydrous sodium sulfate, which often do not dissolve well and remain as particles in the liquid, potentially damaging the paint surface during washing and causing fine scratches. Car wash soap for car washing: The main cleaning ingredients in domestic car wash soaps are natural plant-derived surfactants. Additionally, car wash soap usually contains natural car wax and natural anti-static components for the car body. Car wash soap is generally neutral and will not harm your hands or the paint surface. Since it contains natural wax, it can give the car body a clean and shiny appearance and provide the paint surface with some elasticity, preventing minor sand particles from scratching the paint surface.

4

5

Share

What are the specifications for 16-inch tires?

185/55r16, 195/50r16, 195/55r16, 205/45r16, 205/50r16, 205/55r16, and 205/60r16 are all tire specifications compatible with 16-inch rims. Car tires are one of the essential components of a vehicle, typically mounted on metal rims, supporting the body, cushioning external impacts, ensuring contact with the road, and maintaining driving performance. The first numbers 185, 195, and 205 represent the tire width in millimeters (185mm, 195mm, 205mm). The numbers 60, 55, 50, and 45 indicate the tire's aspect ratio (60%, 55%, 50%, 45%), meaning the sidewall height is 60%, 55%, 50%, or 45% of the tire's width. The number 16 denotes the rim diameter in inches, and the letter "R" stands for radial construction. Tires are one of the critical components of a vehicle, mounted on metal rims to support the body and absorb external shocks, ensuring driving performance. Functions of tires: Tires act as the medium for transmitting forces between the vehicle and the road, including driving force, braking force, and steering force, enabling operations like acceleration, braking, and steering. Supporting the vehicle's load. The vehicle's weight causes the tire to compress until the average pressure on the contact area balances with the internal tire pressure. Absorbing vibrations and impacts during driving, preventing excessive wear and tear on vehicle components. They also ensure smooth high-speed driving, reduce noise, and enhance safety, comfort, handling stability, and fuel efficiency. Tire maintenance tips: Avoid curbs and potholes to prevent sidewall damage and bulging; regularly remove debris from treads; check for wear; rotate tires to prevent uneven wear; and maintain proper tire pressure—neither too high nor too low. Tire storage: Keep tires away from oil and water to avoid damage or deformation; move them indoors during rain to prevent water ingress. Prolonged exposure to sunlight, rain, or outdoor conditions accelerates rubber aging. Store tires in a cool, dry place, away from direct sunlight, UV rays, rain, ozone, oil, and heat, and deflate them slightly for storage.

10

5

Share

How to set up the tire pressure display for the 2020 Audi A4L?

Start the car and open the system menu. In the system menu, select Settings, find the tire pressure monitoring option, and turn it on to display the tire pressure.

14

5

Share

What are the reasons for water under the co-driver and rear floor mats?

Can a driver's license physical examination conducted in another location be uploaded online?

What Causes Low Idle Speed in Motor Vehicles?

Can I Apply for a Replacement Driver's License on 12123 If It's Lost?

What can be used to wash a car at home?

What are the specifications for 16-inch tires?

How to set up the tire pressure display for the 2020 Audi A4L?

How to reset the maintenance reminder for Volkswagen Polo?

Why is the reversing camera image reversed?

Should the AC be turned on in summer?

What is the warranty period for car wiper blades?