What are the reasons for water leakage under the feet in the Envision's cabin?

1 Answers
DeEli
07/30/25 7:33am
The reasons for water leakage under the feet in the Envision's cabin are as follows: 1. Not closing the windows during rainy days: After getting out of the car, failing to confirm whether the windows are tightly closed can allow rainwater to enter various parts of the car through the unsealed windows. Over time, water will seep under the cabin. 2. Issues with drainage outlets: Check the car's drainage outlets. There are four drainage outlets in total, with the front two for sunroof drainage and the rear two for draining water flowing on the car. 3. Garbage blockage: Long-term accumulation of garbage can block the drainage outlets. Vehicles with sunroofs are particularly prone to this, as opening the sunroof makes it easier for garbage to accumulate and cause leaks.
Was this review help?
20
3
Share
More Forum Discussions

How to Fold Down the Rear Seats of the Sagitar?

The method to fold down the rear seats of the Sagitar is as follows: Open the trunk, and below the groove of the car body under the glass, there are two black plastic components, one on each side. Pull them by hand, and the seats can be folded down. Here is some information about the Sagitar: 1. The Sagitar is a new model launched by FAW-Volkswagen in the Chinese market on April 9, 2006. Its English name is "SAGITAR," and it is positioned as a "German high-performance sedan." 2. The Sagitar was developed based on the fifth-generation Jetta sold by Volkswagen in North America. The only difference is that overseas models use the most advanced FSI engine, while the domestic version retains the original 1.8T, 2.0, and 1.6 engines.
9
5
Share

How to Replace the Air Conditioning Filter in the RAV4?

RAV4 air conditioning filter replacement steps are as follows: 1. Open the glove compartment on the passenger side, remove any items, and you will see the location of the air conditioning filter. Push the clip to the left. 2. After removing the cover, you will see the old filter. 3. Take out the old filter and replace it with the new one to complete the process. Below is an introduction to the air conditioning filter: 1. The air conditioning filter refers to the filter in the vehicle's air conditioning system. 2. Function: It is a filter used for air purification inside the car cabin. It can effectively filter smoke odors, pollen, dust, harmful gases, and various odors.
11
2
Share

How to Clean the Inside of Car Windows?

Here are the methods to clean the inside of car windows: 1. Use a vacuum cleaner to remove dirt from the inner window glass grooves, then spray a specialized glass cleaner onto a soft cloth and gently wipe the glass until it shines. Pay attention to removing dust from the gaps. Evenly spray a glass anti-fogging agent, let it dry, and then wipe it clean. Oil stains, fingerprints, tobacco tar, dust, and other stubborn stains on the inner side of the window glass can dirty the windows, obstruct vision, and affect driving safety, so regular cleaning is necessary. 2. Toothpaste can be used for cleaning. Toothpaste has strong stain-removing capabilities, can eliminate oil films, and also has a polishing effect. If dirt on car windows is wiped with a towel, it is not only difficult to clean but also prone to scratches during the process. First, wet the window glass with water, then use toothpaste to clean the dirt. Toothpaste can effectively dissolve dirt; gently scrub with a sponge and rinse clean.
15
0
Share

Highway Driving at Night: High Beam or Low Beam?

Highway driving at night can be done with either high beam or low beam headlights. Precautions for using high beams on highways are as follows: 1. Do not use high beams when entering tunnels. The significant difference in light levels inside and outside tunnels may temporarily impair the driver's vision and reduce reaction capability. Using high beams in tunnels can be dangerous, and since tunnels are already illuminated, high beams are unnecessary. 2. Avoid using high beams in rainy or foggy conditions. High beam light scatters in fog and rain, affecting the driver's visibility. 3. Prolonged use of high beams can cause faster eye fatigue and may lead to visual illusions. When driving on highways at night, avoid continuous use of high beams; adjust your headlights according to different situations.
2
4
Share

Why does the dashboard light come on when stepping on the car brake?

When the dashboard light comes on while stepping on the car brake, it indicates a brake pad warning. Solution: It is necessary to go to a 4S shop for inspection and repair as soon as possible. More information about the dashboard light coming on when stepping on the brake is as follows: 1. Red light: It warns that the vehicle should not be driven, usually due to lack of brake fluid or the handbrake not being fully released. 2. Yellow light: The severity is lower, and the vehicle can continue to be driven, but it needs to be repaired as soon as possible. Possible causes include insufficient brake pad thickness or ABS system failure. 3. Principle of brake function: It converts the kinetic energy of the car into heat energy to consume it. The kinetic energy comes from the power provided by the engine, which requires fuel combustion to provide the work.
15
4
Share

How to Prevent Car Battery from Dying in Winter?

Methods to prevent car battery from dying in winter are as follows: 1. Turn off all electrical equipment after parking and check for any power leakage. The more electrical loads a car has, the higher the possibility of power leakage. To prevent the battery from draining too early, it is necessary to eliminate potential leakage hazards; after parking, turn off all electrical devices (dash cams, radios, audio systems, lights, navigation systems, etc.), and use a multimeter to check for any power leakage. 2. Manually charge the battery. Regularly charging the battery to reduce the state of discharge can extend its service life. 3. Clean the oxides on the battery terminals. Over time, white oxides may form on the battery terminals, affecting current flow or directly causing poor terminal contact, which worsens the already declining battery performance in winter and makes it difficult to start the car. If there are oxides, consider rinsing them with boiling water, wiping them clean with a cloth, and then applying grease.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.