···
Log in / Register

What are the reasons for water leakage in the Tayron's trunk?

3 Answers
StChristian
09/03/25 3:13am
Tayron trunk water leakage may be caused by poor sealing of the door rubber gasket, leading to water seepage during car washing or rain. The following is a detailed analysis of the specific reasons for Tayron trunk water leakage: 1. Rear sunroof seal strip detachment: Water leakage in the trunk may be caused by the detachment of the rear sunroof seal strip. Water seeps in from the detached area of the rear sunroof seal, then splits into two paths: one dripping through the gap where the trunk seat is folded down, and the other leaking directly under the spare tire. 2. Aging of the trunk seal strip: Aging of the trunk seal strip can also lead to poor sealing and water ingress.
Was this review help?
14
2
Share
DeEdward
09/15/25 4:56am
I recently encountered a leak in the Tiguan's trunk, which was really frustrating. At first, I thought it only happened on rainy days, but after pondering for a long time, I realized there are several common causes: the trunk's sealing rubber strip may have aged and cracked, allowing rainwater to seep directly through the gaps; or the trunk door might not be closed tightly, leading to poor sealing over time; another possibility is clogged drainage holes, where leaves and debris accumulate in those small holes, preventing water from flowing; additionally, if the drainage pipes on the roof or sunroof are punctured or detached, water can flow down into the trunk; and if the car has been in an accident or poorly repaired, enlarged seams in the bodywork can also be a source of leaks. I tried cleaning the rubber strip and unclogging the drainage holes myself, and the problem improved significantly. I recommend checking the rubber strips and drainage system before the rainy season to prevent water accumulation in the trunk, which can cause rust or damage to stored items.
Was this review help?
15
0
Share
Expand All
AniyahLynn
10/29/25 5:36am
I've been driving the Tayron and noticed that trunk leaks are quite common, mostly due to issues with sealing components. The rubber trunk seal tends to age and harden, making the door unable to close tightly. Additionally, small drainage holes can get clogged with mud, causing water to overflow when it rains. If the drainage tubes near the sunroof age and crack, water can also leak into the trunk. Large gaps in the body panel seams may also fail to keep rainwater out. Every time I wash the car, I take the opportunity to check these areas—feeling the rubber seals for softness, clearing any blockages in the drainage holes, and using a soft tube to blow them out if necessary. Ignoring such issues can lead to trunk mold, electrical shorts, and increased repair costs. Simple maintenance can prevent major problems.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

Where is Jiangling Motors produced?

Jiangling Motors Co., Ltd. (abbreviated as Jiangling Motors, full English name Jiangling Motors Co., Ltd., English abbreviation JMC) is an automobile manufacturing company headquartered in Nanchang City, Jiangxi Province, China, and is an important light truck manufacturer in China. Here is some additional information: 1. Jiangling Motors: Jiangling Motors Co., Ltd. evolved from the Jiangxi Automobile Manufacturing Plant established in 1968. In 2005, its production and sales reached 73,000 vehicles, and it was consecutively listed among China's top 100 listed companies for three years, becoming one of the largest enterprises in China's commercial vehicle sector, one of the fastest-growing companies in the domestic automobile industry, and one of the companies with the best economic performance. It ranked among China's top 100 listed companies for three consecutive years. 2. Light Truck Manufacturer: In the mid-1980s, Jiangling pioneered the introduction of the latest international truck technology to manufacture Isuzu vehicles in China, becoming a major light truck manufacturer in the country. In November 1993, it was listed on the Shenzhen Stock Exchange, becoming the first listed company in Jiangxi Province. In 1995, it became the first company in China to introduce American Ford Motor Company as a strategic partner through the ADRS issuance method.
4
1
Share

What are the dimensions of the JADE?

JADE has a length, width, and height of 4667mm, 1775mm, and 1540mm respectively. Here are the specific details about the JADE: 1. Body dimensions: The JADE is a compact car under Honda, with a wheelbase of 2760mm, and a length, width, and height of 4667mm, 1775mm, and 1540mm respectively. 2. Powertrain configuration: The JADE is equipped with two engines, a 1.5L and a 1.8L. The 1.5L turbocharged engine delivers 156 horsepower and a maximum torque of 203 Nm, with a maximum power speed of 5500 rpm and a maximum torque speed ranging from 1600 to 5000 rpm. The 1.8L naturally aspirated engine produces 141 horsepower and a maximum torque of 174 Nm, with a maximum power speed of 6500 rpm and a maximum torque speed of 4300 rpm.
17
1
Share

Can the rear seats of the Jade be folded flat?

The rear seats of the Jade cannot be completely folded flat due to an approximately 8 cm gap in the rear trunk seating area. Below are specific details about the Jade: 1. Body dimensions: The Jade is a compact car under Honda, with a wheelbase of 2760 mm, and length, width, and height of 4667 mm, 1775 mm, and 1540 mm respectively. 2. Powertrain configuration: The Jade is equipped with two engines: a 1.5L and a 1.8L. The 1.5L turbocharged engine delivers 156 horsepower and a maximum torque of 203 Nm, with the maximum power output at 5500 rpm and the maximum torque range between 1600 to 5000 rpm. The 1.8L naturally aspirated engine produces 141 horsepower and a maximum torque of 174 Nm, with the maximum power output at 6500 rpm and the maximum torque at 4300 rpm.
5
3
Share

What are the reasons for the JADE's one-button start failure to ignite?

The reasons for the failure to ignite mainly lie in the engine's oil circuit, electrical circuit, and mechanical faults. Below is an introduction to the specific reasons for the JADE's failure to ignite: 1. Oil and electrical circuits: From the oil circuit perspective, the main fault is low gasoline pressure and poor atomization; from the electrical circuit perspective, it is due to excessive spark plug electrode gap, decreased ignition coil energy, and short or open circuits in the cylinder wires. 2. Excessive carbon deposits and dirt: Excessive carbon deposits and dirt in the intake manifold change the cross-sectional area of the air passage, making it impossible for the control unit to precisely control the idle intake volume, resulting in an overly rich or lean mixture, causing abnormal combustion or engine shaking after startup, or even failure to start. 3. Damaged activated carbon canister: If the solenoid valve remains open, the mixture in the engine's intake manifold remains in an enriched state, causing an overly rich mixture during hot starts and leading to failure to ignite. 4. Other issues: A dead battery, starter motor failure, ignition switch failure, timing misalignment, ignition coil failure, fuel pump not supplying fuel, and damage to electronic components such as the crankshaft position sensor can all cause the car to fail to start normally.
15
5
Share

How long is the Genesis G80?

The slightly sloping roofline of the Genesis G80 gives it a touch of retro charm, with a body length approaching 5 meters and a wheelbase exceeding 3 meters. Here are the specific details about the Genesis G80: 1. Body Dimensions: The Genesis G80 has a body length of 4995mm, a width of 1925mm, a height of 1465mm, and a wheelbase of 3010mm. It comes with 19-inch multi-spoke alloy wheels paired with 245/45-R19 Michelin PS4 tires. 2. Powertrain: The vehicle is equipped with a 2.5T turbocharged four-cylinder engine and a 3.5T V6 turbocharged gasoline engine, delivering maximum power outputs of 304 horsepower and 380 horsepower, respectively, with peak torques of 421 N·m and 530 N·m. In markets such as South Korea and Europe, the car also offers a 2.2T diesel engine with a maximum power output of 210 horsepower. All engines are paired with an eight-speed automatic transmission.
13
4
Share

Why was the Jaguar CX75 not mass-produced?

Jaguar CX75 was not mass-produced due to the sluggish global economy, which made the company pessimistic about the market prospects of this hybrid sports car. Here are the specific details about the Jaguar CX75: 1. Range: In pure electric mode, the new car can travel 110km; the total range can reach up to 900km. 2. Power configuration: Unlike the XJ220, which uses a gasoline engine, the new Jaguar C-X75 concept car uses a hybrid power system—four 195-horsepower electric motors and two small gas turbines. The performance of the new car is 0-100km/h acceleration in 3.4 seconds, 0-160km/h in 5.5 seconds, and 0-300km/h in just 15.7 seconds, only 1 second slower than the 1000-horsepower Veyron model. The top speed of the C-X75 is 330km/h.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.