···
Log in / Register

What are the reasons for water ingress on the floor of the 2014 Bora's cabin?

4 Answers
CassidyLee
07/29/25 7:47am
Possible causes include rust perforation in the car's chassis, clogged drainage channels, damaged sealing strips, or water accumulation in the sunroof. Below are the detailed explanations: 1. Rust perforation in the chassis: Water can enter through the wheels, so it's necessary to thoroughly inspect and seal or install protective liners. 2. Clogged drainage channels: The rainwater drainage holes under the front window's drainage channel may be blocked by debris. 3. Damaged sealing strips: During rainy weather, water can enter the car floor through the doors. Check if the door sealing strips are damaged or ineffective and replace them promptly.
Was this review help?
9
0
Share
OBrandon
08/13/25 2:22am
My 2014 Bora had water leakage in the cabin before, and the dampness drove me crazy. There are multiple main causes: the sunroof drain pipes are prone to clogging—when blocked by leaves and dust, rainwater pours down from the headliner, soaking the floor; the door seals age and deform, allowing water to seep in during car washes or rain; if the AC drain pipe clogs, condensed water backflows and drips into the cabin; gaps in body panel welds or poorly applied sealant let rainwater seep through; and aging windshield seals allow water to flow directly into the footwell area. If you notice water intrusion, check these points immediately. In my case, it was a clogged sunroof pipe—clearing it fixed the issue. Delaying repairs risks floor rust and electrical shorts, which are far worse. I recommend regular maintenance of the sunroof and door seals to prevent problems proactively.
Was this review help?
13
1
Share
Expand All
GideonLee
10/05/25 2:25am
As a technician who has repaired many Bora vehicles, there are several common sources of water ingress in the cabin. The most frequent issue is clogged sunroof drainage systems, where water overflows from the headliner onto the floor. Worn or deformed door sealing strips can also create gaps that allow water leakage. Blocked air conditioning evaporator drain pipes may cause water to backflow. Poor welding of body floor seams can lead to water seepage during rainy seasons, and failed windshield installation adhesive seals are another culprit. The inspection sequence should start by checking if the sunroof drainage is clear, using a water hose during car washing to test for leaks. Next, examine the elasticity and connection of door seals, and ensure the air conditioning drain pipe is cleaned. If not repaired promptly, accumulated water can corrode metal components and affect electronic elements of the braking system. Regularly using a vacuum cleaner to clear drainage holes can save money and hassle.
Was this review help?
7
3
Share
Expand All
ElainaDella
11/18/25 3:56am
Buddy, I've encountered the issue of water leakage in the cabin of a 2014 Volkswagen Bora. It's mostly caused by clogged sunroof drains, where rainwater accumulates on the roof and leaks down; aging or damaged door seals that let water seep in during heavy rain; or blocked AC drain outlets causing water backflow or leaks at body panel joints. If you notice water stains, promptly check the sunroof drain holes for leaf blockages and inspect the door seals for cracks. After repairs, remember to clean the drainage paths annually to prevent mold odors and safety hazards—simple maintenance can prevent bigger issues. Don't wait until it's severely damaged to take action, as the repair costs will be much higher then.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What are the exterior differences between the Porsche 911 and 718?

The exterior differences between the Porsche 911 and 718 are as follows: 1. Different doors: The Porsche 718 has two black "large holes" behind the doors on both sides. The entire Porsche 718 series adopts a mid-engine rear-wheel-drive layout, and this iconic design is very noticeable. In contrast, the Porsche 911 does not have these two black "large holes" on the sides of its doors. 2. Different exhaust pipes: The Porsche 718 features a central exhaust pipe, with the exhaust outlet positioned in the middle. On the other hand, the Porsche 911 has dual exhaust pipes, offering options for dual or quad exhaust outlets on both sides.
2
3
Share

What Causes the Rumbling Noise When Tires Are Rolling?

Abnormal noises from tires during vehicle operation may be caused by inaccurate four-wheel alignment. Long-distance driving can cause significant tire wear, leading to uneven tread wear and resulting in abnormal noises. Below is relevant information about vehicle tires: Tire Replacement Timing: The frequency of car tire replacement can be determined based on the tire's wear indicators. Generally, the replacement cycle is approximately every 3-5 years or 40,000-60,000 kilometers. Consequences of Low Tire Pressure: Low tire pressure can lead to sidewall cracking, rubber aging, increased driving load, higher fuel consumption, damage to the tire bead, and even the risk of a blowout. For most passenger cars, the front tire pressure should be between 2.2-2.3 bar when unloaded and 2.4-2.5 bar when fully loaded.
10
1
Share

What car brand does the 'e' logo represent?

The 'e' logo represents the Yizhi EV3, a pure electric compact car under Jiangling Group. Here are some details about the EV3: 1. Dimensions: The new car measures 3720/1640/1485mm (1494mm with roof rack) in length, width, and height, with a wheelbase of 2390mm. 2. Interior: The new car features a HUD in front of the driver's view, with the instrument panel relocated from behind the steering wheel to the center of the dashboard. It comes with an 8-inch touchscreen multimedia system that includes navigation, radio, Bluetooth, panoramic imaging, internet connectivity, and voice recognition. Additionally, the car can be remotely controlled via a mobile app, including functions like door locking/unlocking and air conditioning activation. 3. Powertrain: The Yizhi EV3 is equipped with an IGBT permanent magnet synchronous motor featuring air-cooling technology, delivering a maximum power of 35kW and a peak torque of 150N·m. It can reach a top speed of 102km/h and has a maximum range of 340 kilometers.
12
3
Share

What is the wading depth of the Explorer?

The air intake of the Explorer is located near the edge of the hood at the height of the headlights. The safe wading position is half the wheel hub, approximately 30cm in height. Below is relevant information: 1. Maximum wading depth: The maximum wading depth refers to the distance between the tire contact point and the engine air intake, known as Wattiefe in English. The maximum wading depth is the greatest depth a vehicle can safely pass through under secure driving conditions, also referred to as the safe depth. It is a crucial indicator for evaluating a vehicle's off-road capability; the greater the maximum wading depth, the stronger its wading ability. 2. Impact: If the air intake is below the water level during wading, water can be sucked into the engine's cylinders. Unlike air, water cannot be compressed, which can cause severe damage to the engine's mechanical components. Therefore, the wading depth must not exceed the height of the engine air intake. The height of the engine air intake, and consequently the maximum wading depth, can be increased by installing a snorkel.
12
0
Share

Where is the charging port generally located on an electric car?

Generally, the location of the charging port on electric vehicles varies depending on the model and brand. Some are positioned at the front grille, some above the rear wheels, and others above the front wheels. Additionally, pure electric vehicles typically have both fast-charging and slow-charging ports, with their locations also differing. Below are some precautions regarding electric vehicle charging: Choose a suitable charging environment: Avoid charging outdoors in harsh weather conditions. During charging, the charger generates significant heat, and the power battery pack also produces heat. Therefore, it is essential to select a well-ventilated area for charging. Poor ventilation may lead to overheating and potential safety hazards. During rain or snow, try to charge indoors whenever possible. Correctly manage charging time: During usage, accurately determine the charging time based on actual conditions, considering factors like frequency of use and driving distance. Typically, charging takes about 8-10 hours. Once fully charged, stop charging promptly to avoid overcharging.
2
2
Share

What's the Difference Between Filling Up a China 6 Vehicle at Small Gas Stations?

China 6 vehicles should avoid refueling at small gas stations to prevent the use of poor-quality fuel. When selecting engine oil for China 6 vehicles, low-ash oil should be the first choice. This type of oil contains minimal ash content, significantly reducing the likelihood of particulate filter clogging. The main reasons to avoid gasoline from small gas stations are as follows: Unreliable Fuel Quality: Due to inferior storage and filtration technologies compared to major brand gas stations, the gasoline sold at small stations often contains many impurities. These impurities can clog the vehicle's fuel injection system, causing significant damage. Unknown Fuel Sources: The fuel at small gas stations primarily comes from local small-scale refineries. Some even mix gasoline from these small refineries with major brand gasoline, making it difficult to distinguish genuine from fake, and the quality of the gasoline is hard to guarantee.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.