What are the reasons for water ingress in the rear seat of the Regal?

2 Answers
EvaRose
07/28/25 6:57pm
Reasons for water ingress in the rear seat of the Regal: worn sealing strips, damaged trunk, etc. Here are the specific reasons: Worn sealing strips: Various parts of the vehicle body use sealing strips to ensure waterproofing. The sealing strips are made of rubber material, which has a certain degree of strength and hardness and does not deform under certain pressure conditions. However, long-term exposure to air can easily cause the sealing strips to age or wear out, ultimately leading to water ingress in the trunk. Damaged trunk: The design of the car's trunk follows certain rules, and typically, the body has corresponding drainage curvature designs in various areas. If the shape of the trunk is compromised, it can easily lead to severe water leakage when exposed to rain.
Was this review help?
17
2
Share
GageAnn
08/12/25 12:19am
I've repaired numerous cases of water leakage in Buick Regal rear seats, and the common causes generally fall into these categories. Aged or cracked door seals are the prime suspect, as rainwater seeps through door gaps and gradually permeates beneath the floor mats. Clogged sunroof drain holes are also very common—accumulated leaves and dust can cause water to backflow into the headliner before dripping into the rear seat area. Additionally, deteriorated or improperly installed rear windshield seals are guaranteed trouble during heavy rain. If the chassis drain holes get blocked by mud or debris, accumulated water will seep into the rear seats from the trunk area. Another issue is a loose or clogged AC drain tube, which causes condensation to drain directly onto the floor. Upon discovering water ingress, first remove the accumulated water from the mats, then thoroughly dry them with a blower to prevent mold and odors.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

How to Trade in a Used Car for Another Used Car?

Owners need to prepare their ID cards, and for company vehicles, they should also provide the corporate code certificate, letter of introduction, and other documents. Vehicle registration certificate; vehicle license; original purchase invoice or previous transfer invoice. You can inquire by phone or directly visit the trading company, bring the necessary materials, and then proceed with the trade-in process. Sign the used car purchase and sale agreement and the trade-in agreement; the money from the trade-in directly offsets the payment for the new car.
2
1
Share

What is the penalty for overloading one person in a five-seater vehicle?

For private vehicles, overloading by one person results in a 2-point deduction and a fine. For passenger vehicles, overloading by one person leads to a 6-point deduction. Generally, exceeding 50% capacity incurs a fine and license suspension. For commercial passenger vehicles (excluding buses) and school buses, carrying passengers exceeding the approved capacity by less than 20% results in a 6-point penalty per violation.
16
3
Share

What to Do When the Car Film Gets Scratched?

If the newly applied car window film is severely scratched, you can remove the original film and apply a new one. Try applying some toothpaste on the surface of the film. Use a hairdryer to gently blow around the scratch, then smooth out the raised area to effectively cover the scratch. After the car window film is newly applied, avoid washing the car or opening/closing the windows for at least a week before performing these actions.
5
1
Share

How to Install the Buckle on a Helmet?

For a helmet with a double D-ring design, first thread the strap through both holes on the helmet. After looping the strap, insert the buckle into the front loop. Next, adjust the tightness under the chin and pull it snug. The most effective helmet positioning requires keeping the helmet level with the head, with the helmet's edge about 1 cm above the eyebrows. Finally, fasten the buckle.
13
4
Share

What is the application method for automotive epoxy primer?

Perform surface treatment before painting, including operations such as sandblasting and degreasing on steel surfaces to achieve the Swedish rust removal standard of Sa2.5 grade. When applying epoxy primer, it is necessary to add a dedicated curing agent and thinner, mix thoroughly, and let it stand for about 10 minutes. Apply the epoxy primer to achieve the specified film thickness, which can be done by spraying or brushing, and allow it to dry completely after 24 hours. For the topcoat, fluorocarbon paint or polyurethane paint is mostly selected. Apply the topcoat to achieve the specified film thickness, and allow it to dry completely after 24 hours.
4
0
Share

How to Restore the Small Screen Display on CRV?

Check if any new software has been downloaded recently. If so, it is necessary to free up some memory and uninstall the related software. If it is a hardware issue, you can only take it to a 4S shop for maintenance or to a repair shop for inspection. Check if the car's system software is not updated to the latest version, which may cause the display to freeze. If so, simply upgrade the software version. If many methods have been tried and still do not work, the only option is to perform a car inspection and replace the navigation device with a new one.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.