What are the reasons for the vehicle body crossing the line during parallel parking?

1 Answers
SophiaLee
07/30/25 3:53am
The reasons for the vehicle body crossing the line during parallel parking are: steering the wheel too late, causing the vehicle to press against the line on the right and rear, returning the steering too early, and failing to correct the direction in time. Here are some precautions regarding parallel parking: 1. Maintain distance: Before parking, when the vehicle is close to the right side of the road, pay attention to maintaining a certain distance from non-motor vehicles and pedestrians to ensure safety. 2. Avoid reverse parking: Do not park in reverse to avoid affecting normally moving vehicles. 3. Observe the surroundings: After the vehicle is parked and before opening the door, observe the situation in front of and behind the vehicle first, confirm safety, and then open the door without obstructing the passage of other vehicles and pedestrians.
Was this review help?
6
0
Share
More Forum Discussions

Why doesn't the new generation ix35 have navigation?

The new generation ix35 doesn't have navigation probably because the purchased configuration doesn't include it. The top trim naturally comes with navigation, but you can always ask the 4S store to include navigation as a gift when purchasing the car. New generation ix35 exterior: The exterior design is avant-garde and stylish, with a sharp and domineering large grille in the front, clearly defined body lines on the side that exude strength, and blackened D-pillars that add a sporty touch. The rear is full and upright, very aesthetically pleasing. New generation ix35 interior: The overall layout is relatively simple, with a 9.6-inch display screen in the center that adds a touch of class. This standard model comes with a one-button start function, but the braking system still uses a handbrake.
6
4
Share

Which is better after ten years: Japanese or German cars?

Under normal circumstances, Japanese cars will not experience any major issues after ten years of use, while German cars may develop some electronic faults and oil seepage from rubber seals. More details are as follows: Introduction 1: Most Japanese cars use naturally aspirated engines, with only a small portion adopting turbocharged engines. Naturally aspirated engines are more stable than turbocharged ones, and their rubber seals rarely develop oil leaks over time. Additionally, Japanese car engines operate at relatively lower temperatures and have moderate maximum RPM limits. Introduction 2: In contrast, German cars prioritize performance and cutting-edge technology, resulting in numerous advanced but complex electronic systems that tend to malfunction over time. Furthermore, German cars push their engines to higher performance limits, subjecting engine seals to prolonged high temperatures and pressures, which eventually leads to oil leaks.
5
2
Share

What are the photography standards for yielding to pedestrians?

The photography standards for yielding to pedestrians are introduced as follows: The first category: Automatic capture through electronic eyes. Generally, systems for photographing failures to yield to pedestrians are installed at major urban road entrances and exits. Through camera video surveillance, automatic photography of failures to yield to pedestrians is conducted, and the data is retained. A violation notification SMS will be sent to the user within 3-10 working days. The second category: Manual capture by traffic police through monitoring video. Traffic police in the video monitoring hall will assign officers to monitor video feeds from major intersections and manually capture violations. This is also an irregular and non-directional spot check. If any failure to yield is found, relevant photos and video data will be retained. This method is more flexible than automatic electronic capture, allowing for analysis based on special circumstances, but it is also more labor-intensive. The third category: On-site manual photography by traffic officers directing traffic or the general public.
7
3
Share

What is the normal tire pressure range for a Mercedes-Benz C-Class?

The normal tire pressure for a Mercedes-Benz C-Class should be maintained between 2.3bar and 2.5bar. Hazards of overinflated or underinflated tires: For tires, the pressure should neither be too high nor too low. Overinflation reduces the contact area between the tire and the road, leading to poor grip, which affects the vehicle's handling and driving stability. Underinflation can cause wave-like deformation of the tire during high-speed driving, shortening the tire's lifespan and increasing the risk of a blowout. Introduction to standard tire pressure: According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar.
12
5
Share

What Does Subject 3 Test Include?

Subject 3 examination consists of road driving skills test and safe & civilized driving knowledge test. Below are the detailed contents: Road Driving Skills: Vehicle preparation, lighting simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, passing through intersections straight, left turns at intersections, right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, U-turns, and nighttime driving. Safe & Civilized Driving Knowledge: Requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident disposal knowledge.
14
2
Share

Does idling with the air conditioning on consume more fuel?

Running the air conditioning while the car is idling does consume more fuel. During idling, the engine has to power the air conditioning compressor, water pump, oil pump, and other components, which results in the wastage of other generated energy. The function of car idling: Idling is an operational state of the car where the engine runs in neutral gear. The engine speed during idling is referred to as the idle speed. The idle speed can be adjusted by modifying the throttle opening size, among other methods. Idling means the engine is "producing power without doing work." When the engine is running, if the accelerator pedal is completely released, the engine enters the idling state. Causes of unstable idling: Direct causes include dirty, worn, or incorrectly installed mechanical parts, leading to variations in the power output of individual cylinders. This creates an imbalance in power among the cylinders, causing the engine to idle unevenly.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.