What are the reasons for the unresponsive one-button start in the Volkswagen Lavida?

1 Answers
DallasLynn
07/30/25 10:17am
The reasons for the unresponsive one-button start in the Volkswagen Lavida may include the following: 1. The key is too far from the vehicle. 2. The button was not held long enough or not pressed all the way down. 3. The one-button start was pressed without stepping on the brake. 4. The gear was not in the P (Park) position. 5. The smart key battery is dead. Below is more information about the one-button start: 1. Overview: The one-button start is part of the smart car system, a button device that simplifies the starting process and can also turn off the engine. It is located where the traditional key ignition would be. 2. Function: In case of an emergency stop, pressing the start button more than three times in succession will shut down the engine to complete braking. Alternatively, if the vehicle stalls suddenly while driving, the one-button start can still be used by shifting to N (Neutral) and pressing the one-button start to restart the engine. However, it is important not to step on the brake pedal during this process.
Was this review help?
6
5
Share
More Forum Discussions

How to align the timing of Peugeot 3008?

To align the timing of Peugeot 3008, simply match the tooth on the timing gear with the middle one of the three teeth on the oil pump. Below is an introduction to related content: The transmission components of the timing system are divided into two types: timing chains and timing belts. Timing belts have been used in engines for a long time, with mature technology, lower cost, and less noise. However, they require regular inspection and maintenance, and should generally be replaced when the vehicle has traveled 60,000 to 100,000 kilometers. The specific replacement cycle should be based on the instructions in the vehicle's maintenance manual. Timing chains have significant advantages such as compact structure, high power transmission, high reliability and wear resistance, and lifetime maintenance-free. However, compared to traditional timing belts, they are relatively noisier.
18
1
Share

What are the four major systems that make up the chassis?

Automobile chassis consists of four major systems: the transmission system, the driving system, the steering system, and the braking system. The function of the transmission system is to transmit the power from the engine to the driving wheels. The role of the driving system is to support and install the components and assemblies of the automobile, transmit and withstand various loads from above and below the vehicle, ensuring the normal operation of the automobile. The steering system ensures that the automobile can travel in the direction chosen by the driver. The function of the braking system is to decelerate and stop the automobile, and to ensure reliable parking.
4
4
Share

What is the normal tire pressure for Lavida?

The normal tire pressure range for Lavida is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. Lavida cannot display the tire pressure value because its tire pressure monitoring is automatic. If the tire pressure is abnormal, it will automatically alarm. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the original tire pressure label, press the tire pressure gauge against the tire valve to measure and read the value. Remember to replace the valve cap after measuring. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. It usually alarms when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. The tire pressure monitoring was not reset. After inflating the tire, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the original data, and the tire pressure monitoring indicator light will come on. At this time, just reset the tire pressure. The tire pressure sensor is damaged. The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged while driving, it will also cause the tire pressure fault light to come on. For sensor damage, only a new replacement can be installed.
1
2
Share

Is Removing the Cylinder Head Considered an Engine Overhaul?

Removing the engine cylinder head is considered an engine overhaul. After an engine overhaul, it is essential to pay attention to the following points: Avoid sudden acceleration and hard braking: Hard braking can cause significant impact damage to the newly overhauled engine, especially during sudden acceleration, which can severely affect the break-in of new engine components. This directly impacts the clearance between parts. Maintain a steady speed: While driving, anticipate sudden situations and reduce speed to maintain a steady pace. Keep the speed between 50-80 km/h, but avoid prolonged low-speed driving. Pay attention to gear changes and avoid driving in a single gear for extended periods.
4
2
Share

How many cylinders does the BMW 325 engine have?

The BMW 325 is equipped with a 4-cylinder engine, model B48B20B, with a maximum power output of 135 kW and a maximum torque of 300 Nm. The engine of the BMW 325 is assembled in China using German technology and is produced at the Shenyang Tiexi factory. For daily maintenance of the BMW 325 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any lubricating oil will degrade over time. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may rupture or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear, forming sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
9
2
Share

What Are the Car Tire Maintenance Items?

There are 6 items for car tire maintenance: 1. Tire rotation - It is recommended to rotate the tire positions every 10,000 kilometers to equalize tire fatigue, prevent uneven wear, and extend tire service life; 2. Four-wheel alignment - It is recommended to check every 30,000 kilometers to reduce abnormal tire wear caused by changes in four-wheel alignment parameters; 3. Tire pressure inspection - Check at least once a month. If the tire pressure decreases too quickly, please visit a local tire shop for inspection to avoid greater damage to the tires; 4. Tire dynamic balance inspection - This is to prevent steering wobble when the car speed increases. If the steering wheel wobbles when the car speed exceeds 70 km/h, a tire dynamic balance inspection should be performed promptly; 5. Tire tread depth inspection - When the tire wears down to the wear indicator mark, the tire must be replaced. Using tires beyond the wear indicator mark is very dangerous when driving on wet surfaces because the drainage performance is greatly reduced, which will seriously affect wet surface grip; 6. Tires are rubber products and will age or crack over time. If aging or cracking is found during inspection, they should be replaced promptly.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.