What are the reasons for the two low beam lights of the Trumpchi GS4 not working?

1 Answers
DiSophia
07/29/25 10:46am
The two low beam lights of the Trumpchi GS4 not working could be due to a blown fuse. Car Low Beam Lights: Low beam lights are designed for close-range illumination, with a wide coverage angle (160 degrees) and a short illumination distance. The focus cannot be adjusted. Low Beam Bulb Replacement Method: After unplugging the power connector (some models also have a dust cover, which can be removed), press the release button on the power connector and gently pull it off. The bulb will then be exposed. Rotate the bulb base counterclockwise until you hear a click, indicating it has reached the end, and then gently remove it.
Was this review help?
12
4
Share
More Forum Discussions

How to Study for B2 Driver's License Points Deduction?

Drivers must report to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the violation occurred within fifteen days to participate in a seven-day study session. Below is relevant information: 1. Handling Procedure: Motor vehicle drivers must report to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the violation occurred within fifteen days to participate in a seven-day study session on road traffic safety laws, regulations, and related knowledge. After completing the study session, the vehicle management office must conduct a test on road traffic safety laws, regulations, and related knowledge within twenty days. 2. Annual Review Content: Review the handling of violation points deduction; review the driver's physical condition; review the test results of the safe driving course; only after all violation fines are paid, the physical examination is approved, and the test is passed, can the points for the scoring cycle be cleared.
13
3
Share

What is the most ideal reference for cylinder boring?

Cylinder boring is most ideally referenced to the lower plane. Purpose of cylinder boring: The purpose of cylinder boring is to eliminate surface shape errors on the cylinder to accommodate new pistons. Effects of cylinder surface wear: The degree of cylinder wear has the greatest impact on the power performance of a vehicle. Cylinder wear increases the clearance between the cylinder and the piston or piston rings, reducing the compression pressure in the cylinder and leading to a decline in engine performance. Along the cylinder axis, the wear forms a taper that is larger at the top and smaller at the bottom. The maximum wear occurs at the cylinder wall corresponding to the first piston ring when the piston is at top dead center. The upper part of the cylinder, which does not come into contact with the piston rings, shows almost no wear, forming a step. The wear around the circumference of the cylinder is also uneven, forming an irregular oval shape. The maximum radial wear area is usually near the opposite side of the intake valve.
13
1
Share

How Long Can a Car Battery Generally Be Left Unused?

Car batteries can generally be left unused for about one month. If the vehicle starts normally within a month, it indicates the battery is in good condition. Starting within 15 days is also considered normal. Beyond 30 days, the vehicle typically won't start, although the dashboard may still display information. After 60 days, there will usually be no display at all. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. The commonly referred to car battery is a lead-acid battery, which is primarily made of lead and its oxides, with a sulfuric acid solution as the electrolyte. The normal service life of a car battery varies from 1 to 8 years, largely depending on the vehicle's condition. Under normal circumstances, with proper alternator charging and no electrical leakage or grounding issues, the battery can generally last more than 3 years.
6
0
Share

Which is more fuel-efficient, the new Jetta or the new Santana?

Jetta is more fuel-efficient, with a combined cycle fuel consumption of 5.7L/100km, while Santana has a combined cycle fuel consumption of 6.2L/100km. More details about the Jetta are as follows: 1. The 1.5L engine of the new Jetta has a maximum power of 81KW. The engine adopts advanced technologies such as Freilauf generator, dual VVT timing adjustment system, integrated intake/exhaust camshaft in the cylinder head cover, and continuously adjustable oil pump, effectively reducing fuel consumption while further improving emissions and noise. 2. The CO2 emissions of the Jetta are reduced to 64g/km, and the noise is reduced by 1.5dBA. The AQ160 automatic transmission paired with the 1.5L MPI engine also features an additional ECO-Mode, providing smoother gear shifts. The automatic transmission model achieves the same fuel consumption level as the manual transmission model, with a combined cycle fuel consumption of only 5.7L/100km.
8
4
Share

Is Magotan from FAW or SAIC?

Magotan belongs to FAW-Volkswagen. Magotan is a mid-size sedan under the Volkswagen brand, classified as a B-segment car. The vehicle's dimensions are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm. It is equipped with a 1.8TSI engine paired with a 6-speed Tiptronic automatic transmission. Below are some relevant details about the Magotan:1. The latest Magotan model is equipped with three engines: a 1.4-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. All three engines are matched with a 7-speed dual-clutch transmission.2. The Magotan features a MacPherson strut independent front suspension and a multi-link independent rear suspension.
2
5
Share

How to Deal with Overspray on a Car?

Methods for dealing with overspray on a car: 1. For overspray that has not completely dried, you can spray cleaner on the overspray and wipe it gently with a soft towel. After wiping the entire car, use detailing clay to scrub the paint surface. 2. For dried overspray, first wash the car thoroughly, then use 2000-grit polishing sandpaper to remove the overspray from the paint surface. After that, perform a polishing treatment to restore the gloss of the paint surface, and finally, carry out a full paint surface maintenance. A car's paint consists of four layers: the electrocoat layer, the primer layer, the basecoat layer, and the clearcoat layer. The electrocoat layer serves to prevent rust and enhance the adhesion of the paint layers. The primer layer acts as a connection between the basecoat layer and the electrocoat layer. The clearcoat layer is the outermost layer of the car paint, primarily functioning to enhance the paint's gloss, improve texture, protect against UV rays, and prevent minor scratches.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.