What are the reasons for the sudden increase in fuel consumption of the Baojun 530?

1 Answers
StEloise
07/30/25 10:06am
Engine carbon deposits, spark plug failure, and abnormal tire pressure can cause this. Specific reasons: Engine carbon deposits: During long-term operation of the vehicle, gasoline inevitably produces carbon deposits and sludge during combustion. If these deposits and sludge are not cleaned in time, they will lead to increased fuel consumption. Spark plug failure: The function of the car's spark plug is to use high voltage to generate sparks to ignite the air-fuel mixture. If damaged, it will reduce ignition energy, causing uneven combustion of the mixture, which will slow down acceleration and increase fuel consumption. Abnormal tire pressure: Incorrect tire pressure can also affect the car's fuel consumption. When the tire pressure is too low or the tread is severely worn, the contact area between the tire and the road surface increases, leading to greater friction, increased rolling resistance, and naturally higher fuel consumption. Solutions: Clean engine carbon deposits, replace or clean spark plugs, and check and replenish tire pressure as needed.
Was this review help?
12
4
Share
More Forum Discussions

What are the dimensions of the Jetta VA3?

The dimensions of the Jetta VA3 are a length of 4501 mm, a width of 1704 mm, and a height of 1469 mm, with a wheelbase of 2604 mm, making it a compact sedan. The Jetta VA3 features a 4-door, 5-seat sedan body structure, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension. In terms of power, the Jetta VA3 is equipped with a 1.5-liter naturally aspirated engine, which incorporates DVVT technology and multi-point fuel injection technology, and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed manual transmission, delivering a maximum power of 82 kW and a maximum torque of 145 Nm.
8
2
Share

What is the engine model of the 2019 Camry?

2019 Camry's engine model is M20C, with an actual displacement of 1987ml, 4 cylinders arranged in an L-formation, and naturally aspirated intake. The M20C engine has a bore of 80.5mm, a stroke of 97.6mm, a DOHC valve train, reaches its maximum power at 6600 rpm, and achieves maximum torque at 5200 rpm. The 2019 Camry measures 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm, and is equipped with a CVT continuously variable transmission.
15
0
Share

Under What Circumstances Should Tires Be Replaced?

Tires need to be replaced under the following circumstances: 1. Tread wear reaches the limit: There are wear indicators in the grooves of car tires. For general household cars, the wear indicator is 1.6 millimeters. When the tire wear reaches this limit mark, the tire should no longer be used; 2. Bulging: If a tire bulge is found, it indicates that the cords at the bulging position have broken. Continued use may lead to a tire blowout, so the tire should be replaced promptly; 3. Tire aging: Observe the patterns on the tread and sidewall of the tire. If large areas of cracks appear, it indicates severe tire aging. Regardless of how long the tire has been used, it should be replaced immediately. Aged tires have weakened sidewall strength, and prolonged use may result in a blowout.
20
3
Share

What Causes Uneven Tire Wear?

The causes of uneven tire wear include: 1. Tire quality issues; 2. Abnormal four-wheel alignment; 3. Improper tire pressure (too high or too low); 4. Uneven car suspension can also cause uneven tire wear; 5. Steering gear failure can also lead to uneven tire wear and deviation. Front tires are more prone to uneven wear than rear tires because front wheel suspension alignment cannot be as stable as rear wheels and is more susceptible to deformation. Due to steering requirements, front wheels and suspension cannot have too many fixed points, only through a single rotating shaft (such as MacPherson strut suspension) or connected via two ball joints (like double wishbone suspension). In such configurations where tires are fixed along a single axis, their resistance to deformation is relatively poor.
7
5
Share

How to Replace the Headlight Cover of a Car?

The method for replacing the headlight cover of a car is as follows: 1. First, remove the front protective bar and take off the old headlight, then unplug the power supply of the headlight assembly; 2. Use a heat gun to soften the glue, then use a tool to scrape around the cover to separate the glue. Insert the tool from the sharpest side to pry open the cover, and use both hands to slowly remove the cover with even force; 3. Clean off any residual glue from the glue groove on the back cover, replace it with a new cover, and apply new glue. Be sure to apply enough glue, and ensure the glue line is continuous; 4. Reinstall the headlight following the removal steps. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car and are closely related to safe driving at night or in bad weather conditions.
7
4
Share

How Long Can You Drive When the Car Shows 'Change Oil Soon'?

When the car shows 'Change Oil Soon,' you can typically drive for about 10,000 kilometers. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties, while the additives help compensate for and enhance the performance limitations of the base oil. For a car, engine oil is like blood to the human body, with the engine being the heart of the car. During engine operation, piston movement generates friction, and gasoline combustion in the cylinders can raise temperatures inside the engine to as high as 600 degrees Celsius. This process also produces metal particles and other waste due to friction. Engine oil plays a crucial role in lubricating, cooling, and cleaning the dirt generated by engine friction, ensuring normal engine operation and extending the engine's lifespan.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.