What are the reasons for the sudden increase in engine noise of a car?

1 Answers
MaximusRose
07/24/25 7:11am
The reasons for the sudden increase in engine noise of a car are: 1. The viscosity of the vehicle's engine oil is too high; 2. The drive belt is loose; 3. The car's water temperature is too high; 4. The throttle body, intake manifold, or fuel injectors are too dirty. The solutions for the sudden increase in engine noise are: 1. Check if the viscosity of the vehicle's engine oil is too high; 2. Inspect whether the drive belt is loose; 3. Check the water temperature; 4. Examine if the throttle body, intake manifold, or fuel injectors are too dirty. The function of the engine is: to convert the heat energy of gasoline or diesel into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work.
Was this review help?
17
3
Share
More Forum Discussions

How to Adjust the Seat Position?

Here is the relevant introduction to seat position adjustment: 1. Seat height adjustment: After getting in the car, adjust the cushion height according to your own height. The seat height should ensure a clear and unobstructed forward view, not blocked by the steering wheel, while also allowing a clear view of important instrument information and the overall external environment. 2. Seat forward/backward adjustment: After fully depressing the brake or accelerator pedal, the driver's knees should have appropriate bending space to ensure free movement. 3. Seat backrest adjustment: Adjust the backrest angle to be as vertical as possible, then lean it back slightly to provide reasonable lumbar support for the occupant. 4. Seat headrest adjustment: Adjust the headrest so that its center is roughly level with the back of the driver's head. Additionally, a neck pillow can be installed on the seat to effectively protect the cervical spine. Poor seat adjustment can lead to back pain, neck pain after long drives, and even affect the driver's visual safety. Therefore, adjusting to the correct position is very important.
12
4
Share

What Can Be Modified in Car Customization?

Car customization includes engine modification, chassis modification, electrical equipment modification, body modification, interior modification, safety device modification, entertainment and information system modification, and off-road vehicle modification. Engine modification includes: Intake system, exhaust system, fuel supply system, crankshaft and connecting rod mechanism, valve train, compression ratio, turbocharging system, etc. Chassis modification includes: Braking system, tires, rims and wheel covers, suspension, anti-roll bars, etc. Electrical equipment modification includes: Ignition system, headlights, signal lights, decorative lights, etc. Body modification includes: Body kits, sunroofs, spoilers, decals, etc. Interior modification includes: Trim panels, seats, in-car appliances (water dispensers, refrigerators, microwaves), etc. Safety device modification includes: Anti-theft devices, parking sensors, safety warning systems, etc. Entertainment and information system modification includes: Audio systems, hands-free car kits, walkie-talkies, car GPS, car black boxes, etc. Off-road vehicle modification includes: Protective bars, roll cages, off-road tires, off-road lights, winches, etc.
18
5
Share

How Much Engine Oil Should Be Added to a Sedan?

Engine oil should generally be filled to the midpoint between the upper and lower marks on the dipstick. During driving, due to bumps, there may be a risk of oil leakage, so it should not be overfilled. Consequences of overfilling engine oil: 1. Reduced power: If too much engine oil is added, it may enter the combustion chamber during driving, increasing carbon deposits in the combustion chamber, which raises piston movement resistance and reduces engine power. 2. Environmental non-compliance: Overfilling engine oil can worsen exhaust emissions, severely affecting the lifespan of the catalytic converter, and may also cause the vehicle to fail annual inspections.
6
3
Share

What is the on-road price of the Audi Q3?

The Audi Q3 is positioned as a compact SUV with an official guide price ranging from 271,800 to 359,800 yuan. The most affordable models are the Audi Q3 2019 35TFSI Jin Qu Zhi Ya and the Audi Q3 2019 35TFSI Jin Qu Dong Gan, both with an official guide price of 271,800 yuan. Currently, the lowest dealer quote for these two models in the Beijing area is 217,800 yuan, and the estimated on-road price is around 250,000 yuan. Below is an introduction to the Audi Q3: 1. The Audi Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan, positioned below the Q7 and Q5 in the Audi model lineup. To distinguish it from Volkswagen models, the Audi Q3 has been tuned for more dynamic driving performance and a luxurious, distinctive exterior. It will feature adaptive dampers, similar to those equipped on the TT. 2. In terms of power, it is reported that Audi will initially offer three four-cylinder engines for the Q3. The standard gasoline model is equipped with a 170-horsepower 2.0TFSI engine, while the top-tier Q3 model features the 2.0TFSI engine from the Q5 with a maximum power output of 211 horsepower, achieving a 0-100 km/h acceleration in 6.9 seconds. The 2.0TDI diesel engine has a maximum power output of 140 horsepower.
16
0
Share

What speed can be achieved in first gear when going uphill?

In first gear uphill, the throttle can be pressed to 2000-2500 RPM, which translates to 10-20 km/h. When the front of the car slightly lifts or shakes, start releasing the brake. After the brake is fully released, gradually release the clutch. Avoid releasing the clutch too quickly, as this can easily cause the engine to stall. First gear: The starting gear, used to get the car moving. It has a similar gear ratio to reverse gear and similar performance, so it's not suitable for sustained high-speed operation. Generally, you can shift to second gear once the car gains momentum. First gear is only used when starting, serving as a buffer. Second gear: The passing gear, mainly used for navigating complex road conditions and handling tricky situations, such as sharp-angle (right-angle) turns without special obstacles, crowded urban areas, steep slopes, and bumpy roads. Third gear: The transition gear, primarily used for low-speed driving in urban areas. Depending on the situation, you can easily accelerate to shift to fourth gear or decelerate to shift back to second gear. Fourth gear: Fourth gear is for medium to high-speed driving, corresponding to speeds of 40-60 km/h.
20
3
Share

Will there be penalties for overdue vehicle inspection by just one day?

If a vehicle's annual inspection is overdue by even one day and is caught, penalties will be imposed. Vehicles that have missed their inspection are not allowed to drive normally. If caught by traffic police, the driver will face fines and penalty points. Consequences of overdue vehicle inspection: According to relevant regulations, drivers who operate a vehicle on the road without undergoing the required annual inspection within the specified period will be fined and receive 3 penalty points. If an accident occurs after the inspection has expired, insurance companies may refuse to cover the claim. Even one day of overdue inspection is considered a violation, but the inspection can be completed up to three months in advance. Inspection precautions: Ensure all traffic violations are cleared before the inspection, and the vehicle must be properly maintained; otherwise, it may fail the inspection. Only vehicles with no violations and in good condition will pass. The vehicle's appearance must match that on the registration certificate, and no illegal modifications are allowed. If the car has aftermarket body kits, spoilers, or rims without registration at the vehicle management office, it must be restored to its original factory condition before inspection. Vehicle inspection process: Upon entering the inspection station, take photos to confirm the motorcycle's appearance. Fill out forms and pay fees, ensuring to keep the receipt. After payment, submit the forms to the inspection line staff and wait for the online inspection. Once the vehicle passes inspection, you may leave.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.