What are the reasons for the sudden failure of the car's windshield wipers?

How to Fold Down the Rear Seats of the Hongqi H5?

First, open the trunk and observe that there are two levers on the rear seats. Pulling them will allow you to fold down the rear seats. The split-folding rear seats mean that the backrests can be folded down in proportion. Compared to folding down the entire rear seat, the split-folding method offers greater flexibility, allowing you to fold down only half of the backrest to accommodate large items while the remaining part can still be used for seating. More details are as follows: 1. Split-folding rear seats refer to the backrests that can be folded down in proportion. Compared to folding down the entire rear seat, the split-folding method provides higher flexibility, enabling you to fold down only half of the backrest to place large items while the unfolded part can still be used for seating. Common split-folding ratios include: 1/3, 2/3, and 1/2. 2. 1/3:2/3 split-folding: This usually appears in rear seats with three seats, allowing you to fold down two seats on one side or one seat on the other side. 1/2 split-folding: This typically appears in rear seats with two seats, allowing you to fold down one of the two seats. 3. Entire rear seat folding means the backrest of the rear seat is a single unit. When you need more space for large objects, you can fold down the entire rear seat backrest to gain additional space. The downside of entire rear seat folding is that when the rear seats are folded down, they cannot be used for seating.

18

5

Share

Where is the rearview mirror heating switch on the Changan UNI-T?

The rearview mirror heating switch is located next to the exterior rearview mirror adjustment button, which is a rectangular button with three wavy arrows. The rearview mirror heating function is particularly useful in rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for the driver to frequently wipe the mirror manually, thereby reducing driving hazards. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is distributed across the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporation occurs, water droplets on the mirror surface become smaller, and fog gradually dissipates, effectively defogging and deicing the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the mirror. These wires consume a significant amount of electricity. Therefore, when using the rearview mirror heating function, ensure the car is in an active state. Avoid activating the heating function while the car is stationary to prevent draining the car battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open the side windows slightly to allow air exchange between the inside and outside of the car. This reduces the temperature difference, causing the fog to dissipate gradually. Adjust the car's air conditioning to the appropriate setting to blow warm air for defogging.

15

2

Share

What does Alphard door mean?

Alphard door refers to the reading light activation mode. Halogen reading lights: Halogen interior reading lights use halogen materials. These lights, made with mature technology, are low-cost and widely used in many vehicle models. However, they have certain drawbacks, such as radiation, mercury content, and fragility, which can cause inconvenience during transportation and installation. Their lifespan is approximately 8,000 hours. LED reading lights: LED interior reading lights use LED materials. These lights are pollution-free, radiation-free, and have a long lifespan, theoretically exceeding 50,000 hours. Many vehicle models have already been upgraded to LED interior reading lights. However, due to their higher price, LED interior reading lights are less accessible to the general public, especially in China, where the adoption rate is quite low. In developed countries, the adoption rate is significantly higher.

14

3

Share

Can the starter of Honda CRV be removed without dismantling the intake pipe?

Honda CRV's starter cannot be removed without dismantling the intake pipe. Definition of the starter: The car starter is a crucial component for starting the engine. It rotates by drawing power from the battery, thereby driving the engine's crankshaft to start the engine. Conditions requiring replacement: Generally, the starter of a car is highly durable. The most common reason for replacing a starter is after the vehicle has been driven for a long time, the carbon brushes inside the starter wear out too short due to frequent starts, making it impossible to start even after adjustments; another common issue is severe wear of the engagement gear, leading to starter damage and failure to start.

10

5

Share

What is the engine oil specification for the Geely King Kong manual?

Geely King Kong's dedicated engine oil specification is SJ-10w-30. Oil introduction: 5w represents low-temperature resistance down to -30°C (calculated as 5-35=-30. For example, 0w40 would be 0-35=-35°C). The number 40 represents high-temperature viscosity, determining oil film strength and lubricant thickness. Oil selection method: Based on China's climate conditions, all-season oil can be chosen for most regions, suitable for both winter and summer. All-season oil grades include: 5W/20, 5W/30, 5W/40, 5W/50, etc. The smaller the winter number, the better the low-temperature performance; the larger the summer number, the higher the viscosity and the wider the applicable temperature range.

4

2

Share

Why doesn't the Nissan Sylphy automatic transmission shift gears?

Nissan Sylphy automatic transmission not shifting gears may be due to the following reasons: Engine malfunction: Slight shifting impact may be normal, but if the impact is more noticeable, it is recommended to check the engine's working condition at a repair station and then inspect whether there is a fault in the transmission. Oil passage blockage: If the transmission oil is inadequate or the oil passage is blocked, the pressure in the hydraulic cylinder cannot rise, making gear shifting impossible. Normally, the oil should be changed every 60,000 kilometers, preferably using a circulating machine. Another point to mention: especially for some older cars, even if the oil has been changed as required, if the transmission oil pan has never been removed, the filter screen and filter element inside may be completely blocked, which can also lead to insufficient hydraulic pressure. It is recommended to remove the transmission oil pan of older cars to check its condition.

14

2

Share

What are the reasons for the sudden failure of the car's windshield wipers?

How to Fold Down the Rear Seats of the Hongqi H5?

Where is the rearview mirror heating switch on the Changan UNI-T?

What does Alphard door mean?

Can the starter of Honda CRV be removed without dismantling the intake pipe?

What is the engine oil specification for the Geely King Kong manual?

Why doesn't the Nissan Sylphy automatic transmission shift gears?

What is the method for replacing coolant in the Regal?

How to Reset the Maintenance Light on BMW 740?

What Causes the Clicking Sound from the Chassis After Parking?

What are the causes of piston slap after an engine overhaul?