What are the reasons for the sudden blackout of the Changan Eado screen?

1 Answers
Harris
07/30/25 12:09am
The reasons for the sudden blackout of the Changan Eado screen are: 1. The fuse behind the display screen and navigation is blown; 2. The backlight of the central control is damaged; 3. The battery power is insufficient. Taking the 2020 Changan Eado as an example, it belongs to a compact car with body dimensions of 4730mm in length, 1820mm in width, and 1505mm in height, a wheelbase of 2700mm, a fuel tank capacity of 53 liters, and a trunk capacity of 500 liters. The 2020 Changan Eado is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 158PS, a maximum power of 116kW, and a maximum torque of 260Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
20
2
Share
More Forum Discussions

How to Transfer a Temporary Licensed Vehicle to Someone Else?

Fill out the "Used Motor Vehicle Sales Contract". Proceed with vehicle inspection, photography, tracing of the vehicle identification number, and license plate removal. Complete the "Inspection Record Form" and return to the transfer hall where staff will verify if the vehicle has any traffic violations. Begin the transfer procedures and pay the transfer fee. Then proceed to the "Transfer Acceptance" window to handle relevant formalities. Take the receipt back to the hall to select a new license plate number and collect other documents such as the new license plate.
17
1
Share

Is Elysion a Dongfeng Honda or GAC Honda?

Elysion is a Dongfeng Honda, it is an MPV model under Dongfeng Honda. Taking the 2019 Elysion as an example, its body dimensions are: length 4950mm, width 1842mm, height 1711mm, wheelbase 2900mm, and body weight 1941kg. The 2019 Elysion has a front suspension of MacPherson independent suspension and rear suspension of torsion beam non-independent suspension. It is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 146ps, maximum torque of 175Nm, maximum power of 107kW, and is matched with an electronic continuously variable transmission.
7
1
Share

What Causes ABS Failure?

ABS failure can be caused by: 1. Faulty wheel speed sensors, ABS wiring, ABS pressure control solenoid valves, or ABS computer; 2. Insufficient brake fluid; 3. Dirty ABS sensors. The method to reset the ABS warning light is: Simply disconnect the ABS power source in the engine compartment. The functions of ABS are: 1. Maximize braking efficiency, reducing braking time and distance; 2. Effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; 3. Allow steering during emergency braking, maintaining good steering control; 4. Reduce tire wear by minimizing intense friction between tires and the road surface.
14
5
Share

What Causes Car Shaking When Accelerating Hard?

The reasons for car shaking when accelerating hard are: 1. Excessive spark plug electrode gap; 2. Faulty ignition coil; 3. Loose engine underguard screws; 4. Severe carbon buildup in engine, throttle valve, intake manifold, or valves; 5. Poor fuel quality. Solutions for car shaking when accelerating hard include: 1. Adjusting spark plug gap or replacing spark plugs; 2. Checking fuel pressure and cleaning fuel injectors; 3. Testing cylinder compression; 4. Cleaning throttle body, fuel filter, and fuel lines; 5. Engine maintenance and repair; 6. Inspecting coolant temperature sensor; 7. Replacing with appropriate engine oil.
14
0
Share

Why Do Brakes Make Noise?

Brakes make noise due to the following reasons: 1. Rust on brake discs or pads; 2. Newly installed brake pads; 3. Excessive wear of brake discs or pads; 4. Incorrect installation or mismatched brake pad models; 5. Use of low-quality or overly hard brake pads; 6. Abnormal brake calipers or insufficient brake fluid; 7. Foreign objects between brake drums/discs and pads. Solutions for noisy brakes include: 1. Applying grease or specialized lubricant at the connection between brake pads and calipers; 2. Regular inspection and replacement of brake pads; 3. Periodic brake adjustment; 4. Avoiding frequent brake usage.
10
2
Share

How to resolve the ABS warning light issue in Leopaard CS10?

Confirm the fault condition and symptoms, conduct a visual inspection of the system to check for any brake fluid leaks or damaged wiring. Read the fault codes, which can be done directly with a decoder or by interpreting the warning light flashes according to the service manual to identify the fault. Based on the interpreted fault condition, use necessary tools and instruments to conduct an in-depth inspection of the suspected area to confirm the fault location and cause. Clear the fault codes; check if the warning light remains illuminated. If the warning light persists, it may indicate that there is still a fault present in the system.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.