What are the reasons for the sudden automatic parking failure in Haval H2?

What Are the Essential Maintenance Items for a 40,000-Kilometer Car Service?

Essential maintenance items for a 40,000-kilometer car service include engine oil and oil filter, air filter and cabin air filter, fuel filter, fluids, battery, spark plugs, brake pads, and tires. Below is a detailed introduction to routine car maintenance items: 1. Engine Oil and Oil Filter Replacement: Primarily focuses on the lubrication system's maintenance. The lubrication system's main function is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove impurities from the engine oil, ensuring the lubrication system operates normally. The oil filter should be replaced along with the engine oil during an oil change. Under normal circumstances, a car requires maintenance every 5,000 kilometers. 2. Filter Replacement: The air filter's function is to filter air before it enters the cylinders, removing impurities such as dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The gasoline filter is typically replaced after driving 20,000 to 25,000 kilometers. 3. Spark Plug Replacement: Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Additionally, components such as brake fluid, transmission fluid, battery, throttle body, fuel injectors, and brake pads are part of the inspection items during routine maintenance, with maintenance performed based on usage conditions.

6

5

Share

Is a tire pressure of 280 normal for a car?

If it's in a cold state, a tire pressure of 280 is slightly high. If it's in a hot state, a tire pressure of 280 is normal because the temperature rises due to tire rolling, and the pressure increases accordingly. Tire pressure refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and the damage to the engine will lead to the end of the car's life. Then, the tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car. Both excessive and insufficient air pressure will shorten the service life of the tire. Insufficient air pressure will increase the deformation of the tire body, and cracks are prone to appear on the sidewall. At the same time, it will produce flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, and cord breakage. It will also increase the tire's contact area and accelerate shoulder wear. Excessive air pressure will cause the tire cord to be overstretched and deformed, reducing the elasticity of the tire body and increasing the load on the car while driving. If impacted, it may cause internal cracks and explosions. At the same time, excessive air pressure will also accelerate crown wear and reduce puncture resistance.

20

0

Share

What is Toyota EFI Insurance?

EFI stands for Electronic Fuel Injection system in automobiles, with its full name being electronic-fuel-injection. Below is the relevant introduction: The Electronic Control Fuel Injection System (Electronic-Fuel-Injection, EFI) — commonly referred to as gasoline injection. It is an advanced fuel injection device that replaces the carburetor in gasoline engines. The widespread adoption of electronic fuel injection technology in gasoline engines has improved the atomization of liquid fuel during the mixture formation process. More importantly, it allows for precise control of fuel injection quantity based on varying operating conditions, resulting in more complete combustion. This enhances power output, reduces fuel consumption, and meets emission regulations.

5

1

Share

Why was the Soueast Lingzhi V5 discontinued?

Internal measurement deviations occurred during the production process of steering gears in some vehicles. Under extreme driving conditions, the end cover may detach, leading to heavier steering and potential safety hazards. Soueast Motor Co., Ltd. will conduct free inspections for affected vehicles within the recall scope and replace steering gears free of charge for vehicles with the aforementioned issues to eliminate safety risks. Below is additional information: Disadvantages: The exterior panels appear relatively thin. At 100 km/h, cabin noise is notably high (as Soueast did not equip the vehicle with adequate sound insulation). The interior finish is coarse, inferior to that of Chery and Geely models.

8

1

Share

What Causes an Automatic Transmission Not to Shift at 3000 RPM?

Automatic transmission cars not shifting at 3000 RPM is due to the accelerator being pressed too deeply, causing the ECU system to interpret this as requiring rapid acceleration. Below are detailed explanations of automatic transmission gear positions: 1. P (Park) Gear: When the gear selector is in the P position, the transmission is in neutral internally, but the output shaft is mechanically locked. The car will remain stationary even without applying the brakes, typically used for long-term parking. The car must be completely stationary before engaging P gear, and the parking brake must be applied. On slopes, engage the parking brake before shifting to P. 2. R (Reverse) Gear: When the gear selector is in the R position, the transmission's output shaft rotates in the opposite direction to the engine, enabling the car to move backward. The car must be completely stationary before engaging R gear. 3. N (Neutral) Gear: When the gear selector is in the N position, the transmission's gears are in free rotation, and the clutch is disengaged, placing minimal load on the transmission. N gear is generally used for short stops, such as at traffic lights, and when the car is being towed. 4. D (Drive) Gear: When the gear selector is in the D position, the transmission's internal gears automatically shift between the lowest and highest gears based on factors like vehicle speed and throttle opening, following preset shift patterns. In most cases, D gear is used for normal driving.

11

4

Share

What Are the Techniques for Depressing the Clutch Pedal in a Car?

The techniques for depressing the clutch pedal in a car are as follows: 1. Use the ball of your foot to press the clutch. When depressing the clutch, try to use the ball of your foot, as this provides better leverage and ensures a more stable and complete press. Avoid using the arch or heel of your foot. 2. Press quickly. When preparing to start or shift gears, depress the clutch pedal swiftly—avoid doing it too slowly or intermittently. 3. Depress the clutch fully. Always remember to press the clutch pedal all the way down; otherwise, it will accelerate clutch wear and, over time, make gear shifting difficult. 4. Release slowly. After depressing the clutch and quickly shifting gears or successfully starting, slowly release the clutch, especially when shifting into 2nd or 3rd gear, to prevent the car from jerking. 5. Find the semi-engagement point. When starting on a slope, the clutch's semi-engagement point is often used. For example, when stopped on a steep slope at a traffic light or in traffic, to avoid rolling back, lift the clutch to the semi-engagement point—where the car neither moves backward nor forward—then gently press the accelerator while slowly releasing the clutch to move forward. 6. Avoid resting your foot on the clutch pedal for extended periods. When the clutch is not in use, always remove your foot from the pedal. Prolonged resting can increase wear on the clutch disc. The clutch is located within the flywheel housing between the engine and the transmission, allowing the driver to engage or disengage the engine's power to the transmission by depressing or releasing the clutch pedal as needed.

6

5

Share

What are the reasons for the sudden automatic parking failure in Haval H2?

What Are the Essential Maintenance Items for a 40,000-Kilometer Car Service?

Is a tire pressure of 280 normal for a car?

What is Toyota EFI Insurance?

Why was the Soueast Lingzhi V5 discontinued?

What Causes an Automatic Transmission Not to Shift at 3000 RPM?

What Are the Techniques for Depressing the Clutch Pedal in a Car?

What Does Avenir Mean?

What car has a leopard logo?

Where is the Three-Way Catalytic Converter Installed?

What Causes Steering Wheel Shaking on the Highway?