What are the reasons for the squeaking noise in Volkswagen Polo's brakes?

1 Answers
VonSarah
07/29/25 11:57am
There are several reasons for the squeaking noise in Volkswagen Polo's brakes: 1. ABS braking system producing noise: If the vehicle is equipped with an ABS braking system, the noise may originate from this system. This is because the ABS system activates under poor road conditions, making such noises normal in such scenarios. 2. Foreign objects in the braking system: It is advisable to check at a repair shop for any foreign objects that may have entered the braking system, as these can cause noise. 3. Abnormal operation of the brake caliper: The brake caliper pushes the brake pad to create friction against the brake drum for normal braking. The brake caliper is crucial to the braking system, and keeping it clean during daily driving is essential. If not cleaned regularly, accumulated debris can lead to various noises. 4. Excessive wear of brake pads: Brake pads are consumables. Under normal driving conditions, it's recommended to inspect the brake pads every 5,000 kilometers. Whether replacement is needed depends on the specific situation. Excessive wear of brake pads naturally results in noise.
Was this review help?
7
3
Share
More Forum Discussions

What is the engine technology of the Fengon 580?

Fengon 580 utilizes two types of engine technologies: one is a 1.5-liter inline 4-cylinder turbocharged engine, and the other is a 1.8-liter inline 4-cylinder naturally aspirated engine. Below is an introduction to the Fengon 580: There are a total of 9 models of the Fengon 580 available for sale, categorized under National V and National VI emission standards. Among these, only one model with a 1.8L engine meets the National VI emission standard. The 1.5-liter inline 4-cylinder turbocharged engine is paired with either a 6-speed manual transmission or a CVT continuously variable transmission. It delivers a maximum power of 110KW, maximum horsepower of 150PS, and maximum torque of 220N·m. The engine reaches its peak power at 5600rpm and peak torque between 1800-4000rpm. All models use multi-point fuel injection. The 1.8-liter inline 4-cylinder naturally aspirated engine is matched with a 5-speed manual transmission, producing a maximum power of 102KW, maximum horsepower of 139PS, and maximum torque of 187N·m. It achieves peak power at 6000rpm and peak torque between 3600-4200rpm. All models also employ multi-point fuel injection.
11
2
Share

At what speed is the most fuel-efficient?

The most fuel-efficient speed for sedans is between 60km/h and 90km/h. Cars are most fuel-efficient when traveling at their economic speed. Generally, on highways, exceeding the economic speed leads to increased fuel consumption as speed increases. Methods to save fuel: Minimize the use of brakes. Driving in a 'start-stop' manner is particularly fuel-consuming. When approaching intersections or downhill sections, you can release the accelerator in advance to allow the car to decelerate naturally and stop, which is more fuel-efficient. Reduce the car's load. It is advisable to remove unnecessary items from the car. If the load is reduced, fuel consumption will naturally decrease slightly. Ensure normal tire pressure. If the tires are abnormal, it can also increase fuel consumption. Therefore, if any tire abnormalities are detected, they should be checked promptly. This not only saves fuel but, most importantly, ensures driving safety. Control the optimal engine speed. While driving, the engine speed of most fuel-injected cars is most efficient between 2200 and 2500 rpm. Regardless of the gear, maintain the engine speed around 2200-2500 rpm. Too low a speed makes the car sluggish, consumes fuel without moving, and damages the engine, while too high a speed increases unnecessary fuel consumption and also harms the engine.
19
0
Share

Where is the remote control receiver of Volkswagen Lavida located?

The receiver of Volkswagen Lavida is located under the steering wheel, which is the CBD. The following is the relevant introduction of Volkswagen Lavida: 1. Exterior design: Volkswagen Lavida Qihang is a model launched by SAIC Volkswagen, originally known as the Lavida Classic Edition. The SAIC Volkswagen Lavida Qihang is based on the previous generation model, with little change in the overall shape, but some adjustments in details. The biggest difference lies in the shape of the front bumper. The front bumper of SAIC Volkswagen Lavida Qihang is divided into three parts, more contoured, and a chrome decoration strip running through the front of the car is added, which improves the visual effect. 2. Configuration: The car is equipped with ESP electronic stability system, RKA intelligent tire pressure monitoring, MKB multiple collision prevention, front airbags for driver and passenger, PM2.5 dust filter, reversing radar and other configurations. On this basis, the high-end model is also equipped with LED daytime running lights, cruise control, multifunction steering wheel, leather/fabric spliced seats, electric sunroof and other configurations. 3. Power: SAIC Volkswagen Lavida Qihang continues to be equipped with a 1.5L engine, with a maximum power of (112Ps) and a maximum torque of 145Nm. The transmission system is matched with a 5-speed manual and a 6-speed automatic transmission.
14
2
Share

How to Repair Car Interior Burned by Cigarette?

Solutions for car interior burned by cigarette: 1. Find a professional car beauty shop that specializes in interior renovation. They can reupholster the area with the same fabric. 2. Cover the burned spot with some decorative accessories you like. 3. If the burned area is small, you can use banana peel with egg white to wipe it, then clean it off with a towel. 4. Visit an interior modification shop to have the car roof and ABC pillars wrapped with leather. Here is some extended information about car interiors: (1) The car interior is an important component of the entire vehicle. Its main functions are to enhance the interior decoration, while the roof lining also improves heat insulation from the outside, reduces interior noise, enhances sound absorption, and improves passenger comfort and safety. (2) Due to direct sunlight on the roof, the temperature at the top of the car is relatively high. Therefore, the heat resistance and weather resistance requirements for roof linings are stringent. Different grades of roof linings vary in materials and structure. To improve sound insulation, heat insulation, and noise reduction, various fiber felts, polyurethane foam, polyethylene foam, and other materials are often bonded together with other materials to form padding. These are then combined with cover materials such as non-woven fabrics and knitted fabrics through specific bonding methods to form an integrated structure.
12
0
Share

Where is the windshield washer switch for the Haval F7?

The windshield washer switch for the Haval F7 is located on the right side of the steering wheel. The function of the windshield wiper: The windshield wiper is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Classification of windshield wipers: According to the working method, windshield wipers can be classified into traditional intermittent wipers and rain-sensing wipers. The former is a more common type, which can be adjusted by the driver according to the rain intensity; while the rain-sensing type is mostly used in mid-to-high-end models. To ensure the normal use of the wiper, it is best to replace the wiper regularly.
17
1
Share

What are the precautions for car maintenance in autumn?

There are several aspects to pay attention to for car maintenance in autumn: 1. Engine compartment maintenance: Check the engine oil, brake fluid, and coolant in the engine compartment to ensure they are sufficient, not deteriorated, and within the replacement cycle. These fluids are like the lifeblood of your car, and they must be replaced when due to ensure smooth circulation. 2. Brake system maintenance: Brake system care should not be neglected at any time, not just in autumn. Regularly check if the braking performance weakens or pulls to one side, and whether the brake pedal's resistance changes. If necessary, clean the entire brake system's piping. 3. Heater lines and fan maintenance: As the weather cools in autumn, frost may appear at lower temperatures. Pay special attention to whether the defrost vents under the windshield are functioning properly and providing sufficient heat. Address any issues promptly. 4. Air conditioning maintenance: Inspect the air conditioning system to ensure the pipes are intact and check if the cabin air filter needs replacement. 5. Battery maintenance: The battery terminals are the most problematic areas in autumn. If green oxide deposits are found during inspection, rinse them off with boiling water immediately. These deposits can lead to insufficient generator output, causing the battery to discharge and, in severe cases, result in battery failure or difficulty starting the car. 6. Interior maintenance: Due to high temperatures and frequent rain in summer, carpets, floor mats, and other hidden areas inside the car can harbor bacteria. It is essential to perform a thorough interior disinfection and cleaning.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.