What are the reasons for the remote car lock not working?

1 Answers
NevaehAnn
07/29/25 11:59am
Remote car lock not working reasons are: 1. Strong magnetic field interference signals around the car; 2. Car malfunction; 3. Dead battery or poor battery contact; 4. Aging antenna of the remote transmitter in the car; 5. Failure of the time control module in the remote key. Solutions for remote car lock not working: 1. Check battery circuit or replace the battery; 2. Inspect the condition of aging circuits; 3. If the remote key doesn't work, use the mechanical key to lock the car; 4. Check the lock block and the open/short circuit conditions in the control circuit; 5. Park the car in another location and try again to avoid magnetic field interference signals.
Was this review help?
8
4
Share
More Forum Discussions

What to Do If the Headlights of Changan Oushang Are Too Dim?

The solution for the dim headlights of Changan Oushang is to retrofit them with xenon bulbs or replace them with new bulbs. Generally, the brightness of the headlights will decrease after two years of use due to the high-temperature oxidation of the filament. It is recommended to replace them with bulbs of the same model. Taking the Changan Oushang X7 as an example: it is a compact 5-door, 5-seat SUV with dimensions of 4705mm in length, 1860mm in width, and 1720mm in height, and a wheelbase of 2780mm. It is equipped with a 7-speed dual-clutch transmission. The curb weight of the Changan Oushang X7 is 1590kg, featuring a front McPherson independent suspension and a rear multi-link independent suspension, with a front-wheel drive system.
13
1
Share

What are the reasons why a sedan won't start?

The reasons why a sedan won't start are: 1. Insufficient battery power or a dead battery; 2. Incorrect gear position - generally, automatic transmission models can only be started when shifted to P (Park) position; 3. The steering wheel is locked - if the steering wheel isn't straightened, the key won't turn, and the car naturally won't start; 4. Weak key battery - if the key fault indicator on the dashboard is lit, it means the key battery is low. When using the car, it's necessary to warm up the engine first. After starting the car, wait 30 seconds to one minute before driving, but avoid high-speed driving during this period. Maintain low speed for about 3 to 5 minutes, generally keeping the RPM below 2000. Only after the engine temperature rises to normal operating temperature should you resume normal driving.
9
5
Share

Where is the BMW oil dipstick?

BMW does not have a mechanical oil dipstick. To check the oil level, you need to use the electronic oil dipstick in the iDrive multimedia system or find the oil level option on the instrument panel. BMW's car brands include: BMW 1 Series, BMW 3 Series, BMW 5 Series New Energy, BMW 5 Series, and BMW 2 Series Tourer. Taking the BMW 1 Series 2021 120i M Sport as an example: this is a compact 4-door 5-seater sedan with a length, width, and height of 4462mm, 1803mm, and 1446mm respectively, a wheelbase of 2670mm, a fuel tank capacity of 50 liters, a front suspension using MacPherson independent suspension, and a rear suspension using multi-link independent suspension.
13
2
Share

How to Replace the Battery of a Besturn B30 Car Key?

The method to replace the battery of a Besturn B30 car key is: 1. There is a round button on the side of the car key. Press this button with one hand and pull out the mechanical key with the other hand; 2. Locate the gap in the middle of the top of the key and insert a flat-head screwdriver; 3. Pry the key up and down until a gap is created; 4. Take out the key circuit board, gently push one side of the battery with your finger, and remove the battery; 5. Install the new battery with the positive side facing up. Taking the Besturn B30 2019 1.6L Automatic Comfort model as an example: The length, width, and height of this car are 4625mm, 1790mm, and 1500mm respectively, with a wheelbase of 2630mm, a fuel tank capacity of 50 liters, a trunk capacity of 480 liters, and a curb weight of 1270kg.
3
0
Share

How to Fix a Volkswagen Sharan Sunroof That Won't Close?

The solutions for a Volkswagen Sharan sunroof that won't close are: 1. Check for any debris blocking the mechanism and clean it thoroughly; 2. Apply lubricant to the sunroof tracks; 3. If the sunroof seal strip is lifted or displaced, spray a small amount of plastic protectant or talcum powder on the sealing components. Taking the 2018 280TSI Enjoy 7-seater model as an example: The Sharan is a 5-door, 7-seat MPV with dimensions of 4854mm in length, 1904mm in width, and 1740mm in height, and a wheelbase of 2920mm. This vehicle is equipped with a 1.4T inline 4-cylinder engine and a 6-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front MacPherson strut independent suspension and a rear multi-link independent suspension.
3
0
Share

What is the real fuel consumption of the Emgrand S?

The comprehensive fuel consumption of the Emgrand S is 5.9L/100km. Currently, there are 4 models of the Emgrand S available for sale: CVT Flagship, CVT Luxury, CVT Premium, and Manual Comfort, all with a comprehensive fuel consumption of 5.9L/100km. The above figures are NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 6.0-7.6L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, early braking: When driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during driving, making the car more fuel-efficient. By anticipating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Regular oil changes can reduce carbon deposits (carbon deposits can cause poor ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires); regular checks and timely replacement of dirty air filters, cleaning or replacement of fuel injectors, spark plugs, and throttle bodies at specified mileage intervals. Close windows while driving. Driving with windows open increases wind resistance, and greater wind resistance means more resistance for the car, requiring more power and thus increasing fuel consumption.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.