What are the reasons for the poor cooling effect of the Tiguan's air conditioning?

2 Answers
LaBriella
07/29/25 1:58am
Volkswagen Tiguan's air conditioning has poor cooling effect due to insufficient Freon in the air conditioning system, clogged pipes in the switch, or the compressor not functioning properly. Insufficient Freon in the air conditioning system: Freon is a heat-absorbing medium. Only when there is enough Freon in the car's air conditioning system can it effectively remove heat and lower the temperature inside the car. If the system has been used for a long time without regular refilling, or if the Freon level is insufficient due to pipe leaks or air infiltration, it will not be able to absorb enough heat and effectively lower the temperature inside the car, resulting in insufficient cooling. The solution is to add an appropriate amount of Freon. Clogged pipes in the switch: In the car's air conditioning system, there are numerous pipes connecting the condenser to the evaporator, with a large amount of refrigerant flowing through these pipes. If any part of these pipes is clogged with small debris, the flow of refrigerant will be obstructed, and the heat inside the car cannot be effectively transferred. In this case, the temperature inside the car will not decrease, and the cooling effect of the air conditioning will be worse than usual. The solution is to clean out the impurities in the pipes. Compressor not functioning properly: The air conditioning system exchanges heat, and the compressor plays a crucial role in this process. Under the operation of the compressor, liquid refrigerant is converted into gas, absorbing a large amount of heat and releasing it outside the car, thereby lowering the temperature inside the car through circulation. When the compressor is not functioning properly, it needs to be repaired or replaced.
Was this review help?
8
1
Share
McMiles
08/12/25 6:00am
Having driven the Tiguan for many years, poor air conditioning cooling performance can be caused by several common issues. Insufficient refrigerant is one of the main reasons—there might be a leak in the system, and low Freon levels can disrupt the entire cooling cycle. A dirty cabin air filter is another frequent culprit, as dust buildup can obstruct airflow, reducing the coolness of the air blown out. Problems with the condenser or evaporator are also possible; if the car is often parked under trees, debris like leaves can accumulate on the condenser, reducing heat dissipation and weakening cooling performance. Additionally, compressor failures are not uncommon, especially in older vehicles, where internal wear can lead to pressure imbalances. A malfunctioning or slow-moving fan can also hinder cooling efficiency. I recommend starting with simple checks: pop the hood and inspect the condenser for dirt—if it’s dirty, rinse it with water. Then replace the cabin air filter, which is an inexpensive fix. If the issue persists, check the refrigerant pressure or inspect the compressor. On hot days, turn on the AC a few minutes before driving to detect potential problems early. Don’t delay repairs too long, or you might end up with costly fixes.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

What is the difference between 4-door 5-seater and 5-door 5-seater?

The difference between 4-door 5-seater and 5-door 5-seater is: 1. Different number of doors: 4-door 5-seater has 4 doors; 5-door 5-seater has 5 doors. 2. Different vehicle types: 4-door 5-seater is used for sedans; 5-door 5-seater is used for SUVs. 3. Different body structures: 4-door 5-seater has a three-box body structure; 5-door 5-seater has a two-box body structure. If the seat back can be lifted, it is also counted as a seat, and the other seats are the front driver's seat, front passenger seat, and rear passenger seats. The current vehicle body structure refers to the number of doors and seats. Generally, three-box vehicles have 4 doors, while 5 doors specifically refer to models where the rear tailgate can be opened. Coupe models are also referred to as 5-door vehicles.
16
5
Share

Can a person with monocular vision obtain a driver's license?

Can a person with monocular vision obtain a driver's license? The answer is yes. Here are the specific vision requirements for obtaining a driver's license: 1. Monocular vision impairment: Individuals with monocular vision impairment can apply for a driver's license if their naked-eye or corrected vision reaches 5.0 or above on the logarithmic visual acuity chart, and their horizontal field of vision reaches 150 degrees. They are eligible to apply for a driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or small automatic transmission passenger cars specifically designed for disabled individuals. 2. Vision requirements: For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tramcars, applicants must have naked-eye or corrected vision of 5.0 or above in both eyes on the logarithmic visual acuity chart. For other types of vehicles, applicants must have naked-eye or corrected vision of 4.9 or above in both eyes on the logarithmic visual acuity chart.
20
5
Share

Can New Energy Vehicles Charge During Thunderstorms and Rain?

New energy vehicles can charge during thunderstorms and rain. Vehicle charging requires a charging pile, which outputs voltage and current to enter the vehicle's battery. The connection from the charging pile to the vehicle's charging port is made via wires, and the charging gun is directly inserted into the vehicle's charging port. The design of the charging port is very ingenious, with an insulated sealing ring around it. Precautions during rainy days: 1. When parked: When the vehicle is not in use, try to park it in an open area. Avoid parking in low-lying areas, under trees, near high-voltage lines, or near fire sources. The water depth in the parking area should not exceed 20cm. If the battery gets soaked in water, contact the vehicle manufacturer or battery manufacturer for handling. 2. When charging: When charging a pure electric vehicle, observe the charging gun and charging base to ensure they are dry and free from burn marks. Avoid charging outdoors in rainy weather.
3
0
Share

Why Can't a Natural Gas Vehicle Accelerate When Pressing the Throttle?

Introduction to the reasons why a natural gas vehicle can't accelerate when pressing the throttle: This situation may be caused by a damaged air flow meter, insufficient cylinder pressure, or a faulty ignition coil. Check if the gas pressure valve has any issues, as insufficient pressure could also be the cause. A dirty throttle position sensor or voltage imbalance can also prevent acceleration. More related details: 1. Try to determine if the vehicle's throttle pedal is malfunctioning: When pressing the throttle, the cable moves the throttle valve (i.e., the throttle), which has a position sensor. The control unit uses the signal from the throttle position sensor to determine the throttle opening and then calculates the corresponding signal voltage. Based on this voltage, it determines the fuel injection amount. 2. Inspect the engine's fuel system: If low-quality gasoline is used, it may lead to fuel pump burnout, catalytic converter failure, piston issues, etc., directly affecting engine power and causing symptoms like engine stalling or inability to accelerate. If the spark plugs are degraded or low-quality spark plugs are used, it can also result in poor acceleration or acceleration shuddering.
7
3
Share

Where is the fuel tank cap switch located on a Citroën?

The fuel tank cap switch for Dongfeng Citroën is located below the left side of the driver's seat. There are three key points to note regarding fuel tank installation: 1. Storage location: The fuel tank must be stored in a safe location to prevent fires. The tank or fuel container should be placed separately in a visible area, at a safe distance from the diesel generator set, and smoking is strictly prohibited. 2. After placement: The highest fuel level should not exceed 2.5 meters above the base of the diesel generator set. If the fuel level in a large fuel storage exceeds 2.5 meters, a daily-use fuel tank should be installed between the large storage and the diesel generator set to ensure the direct fuel supply pressure does not exceed 2.5 meters. Even when the diesel generator set is turned off, fuel must not flow into the diesel engine through the fuel inlet or injection lines by gravity. 3. Resistance requirements: The resistance at the fuel port must not exceed the specified value for all diesel generators. This resistance value is based on the fuel tank being half full.
12
5
Share

Do brake pads and brake discs need to be replaced together?

Brake discs and brake pads do not necessarily need to be replaced together, as it depends on the specific situation, since brake pads wear out more frequently than brake discs. Below is relevant information about brake discs and brake pads: 1. Situation Analysis: Brake pads must be replaced when they wear down to a certain limit (usually when 2-3mm remains). When replacing brake pads, it is not always necessary to replace the brake discs. Whether the brake discs need to be replaced depends on the situation, such as if the wear on the brake discs exceeds 2mm (some models specify that wear exceeding 1mm requires replacement). Of course, there are also cases of abnormal wear where both the brake pads or brake discs must be replaced. 2. When replacing the brake pads, special tools must be used to retract the brake caliper pistons: Other pry bars should not be used to force them back, as this can easily bend the guide screws of the brake caliper, causing the brake pads to seize. After replacing the brake pads, a running-in period of 200 kilometers is required to achieve optimal braking performance. Drive cautiously with newly replaced brake pads.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.