What are the reasons for the non-responsive reversing camera in the 2021 Sagitar?

1 Answers
DeLyla
07/30/25 7:09am
Here are the reasons why the reversing camera in the 2021 Sagitar may not respond: 1. Damaged or obstructed camera: If the camera is damaged, the image cannot be transmitted to the computer, and thus it won't display. It is recommended that the owner promptly inspect and repair it, replacing the camera if necessary. 2. Poor wire connection: If the owner frequently drives on rough roads, the bumpy environment may cause internal wires to loosen or detach. When the wire connection is poor, the image from the camera cannot be transmitted to the main unit. In this case, the wires inside the central control panel need to be checked. 3. Dead battery: When the car is turned off, prolonged use of lights or multimedia can drain the battery. When the battery is low or dead, the car's multimedia system will not function, and the reversing camera will not appear. In this situation, the battery needs to be recharged or replaced.
Was this review help?
1
4
Share
More Forum Discussions

What car brands are under Fiat?

Fiat owns many car brands. Here is some knowledge about the car brands under Fiat: Introduction to Fiat: Fiat is the transliteration of the company's abbreviation, and FIAT is also the trademark of the company's products. Famous brands under Fiat: These include Fiat, Chrysler, Jeep, Dodge, Ferrari, Maserati, Alfa Romeo, Lancia, Dodge RAM, New Holland, FIAT PROFESSIONAL, and others. Additional knowledge about Fiat: Apart from being famous for its body design, Fiat cars are also praised by experts for their driving pleasure. The Fiat Punto convertible never disappoints; it is equipped with a 1.6-liter engine, featuring a single overhead camshaft and two valves per cylinder.
14
2
Share

How to Check the Manufacturing Date from a Car's VIN?

The reasons for low cylinder pressure include: 1. Excessive side clearance or end gap of the piston rings, or the first seal of the piston rings being worn out, leading to poor sealing; 2. Excessive wear between the piston and cylinder, increasing the clearance, causing the piston to wobble during movement, affecting the proper sealing between the piston rings and cylinder; 3. Piston rings sticking or carbon deposits in the ring grooves, preventing the rings from exerting their elasticity and losing the first sealing surface between the compression rings and cylinder wall; 4. Cylinder scoring, which damages the sealing between the piston rings and cylinder; 5. Incorrect installation of the timing gear, incorrect keyway on the gear, severe damage or wear of the timing gear, or looseness between the camshaft timing gear profile and the gear; 6. Use of mismatched cylinder heads, such as those with different combustion chamber volumes, which can affect cylinder pressure if installed incorrectly.
14
4
Share

How to Install the Belt on a Buick Excelle?

Buick Excelle belt installation method is: Align the ignition marks of the crankshaft and camshaft; Place the belt on the crankshaft pulley, then run it upwards from the side opposite the tensioner pulley and place it on the camshaft pulley; Then fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is an important part of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific gear ratio. The Excelle is a compact sedan with dimensions of 4609mm in length, 1798mm in width, and 1464mm in height, a wheelbase of 2640mm, and is equipped with a 1.5L naturally aspirated engine producing a maximum horsepower of 113 and a maximum torque of 141 Nm.
8
1
Share

How to Clean Spark Plug Carbon Deposits?

Methods for cleaning spark plug carbon deposits include: 1. Using a spark plug cleaner: Install the carbon-deposited spark plug into the cleaning hole of the cleaner, start the air compressor, and when the pressure rises to 68-70 kPa, open the compressed air valve to allow compressed air to blow sand particles from the collection bag onto the spark plug's skirt. Slowly rotate the spark plug to thoroughly remove carbon deposits and dirt from all internal surfaces; 2. Cleaning with carburetor cleaner; 3. First soak in gasoline, kerosene, or acetone solvent, or boil in alkaline water. After the carbon deposits soften, use a non-metallic brush to clean the deposits on the electrodes and the cavity between the ceramic core and the shell. Finally, dry with compressed air, avoiding high-temperature baking during the drying process.
4
0
Share

How to Obtain a Car Driver's License with a Motorcycle License?

After obtaining a motorcycle license, the method to acquire a car driver's license is to apply for an additional license and take the required tests. The examination consists of the following four parts: 1. Subject 1: Road traffic rules, traffic signals, handling of traffic safety violations and accidents, regulations on the application and use of motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules; 2. Subject 2: Testing reverse parking, assessing the mastery of motor vehicle driving skills and the ability to judge the spatial position of the vehicle; 3. Subject 3: Evaluating the performance of driving a motor vehicle on the road to complete test items, compliance with traffic laws and regulations, and the ability to comprehensively control the vehicle; proper use of lights, horns, seat belts, and other devices; the ability to correctly observe and judge road traffic conditions; 4. Subject 4: Separately listing the knowledge related to safe and civilized driving from Subject 1, as well as safe driving skills under complex conditions and emergency handling in critical situations, conducted after the 'Subject 3' practical road driving test to further assess the candidate's traffic quality level.
4
0
Share

What is the correct sequence for gear shifting and acceleration in Subject 3?

The correct sequence for gear shifting and acceleration in Subject 3 is: coordinate the throttle and clutch for a smooth start; shift gears progressively for steady driving; keep eyes on the road and coordinate hands and feet; match speed with the appropriate gear. Below is an introduction to the content of the Subject 3 test: 1. The road driving skills test for Subject 3 generally includes: preparation before starting, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over to the side, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing through school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.