What are the reasons for the non-functioning of the turn signals and hazard lights in the Fit?

Why does car paint turn white and lose its gloss after polishing?

The outermost layer of car paint is a clear coat, which is transparent and glossy. Improper polishing techniques can damage this clear coat, resulting in a white, dull appearance. Correct car paint polishing method: First, wash the surface of the car paint with car shampoo. Ensure that hard particles like dust are removed, as they can scratch the paint during the polishing process. Then, use wet sandpaper for initial rough sanding of the paint surface. Avoid excessive sanding, as it can damage the paint. Select an appropriate polishing machine and apply polishing wax for the polishing process. After polishing, perform a mirror-finish restoration by wiping the polished area with a mirror-finish treatment agent. Precautions for car paint polishing: Always adhere to the principle of "better slow than fast, better light than heavy" to avoid exposing the primer. Before polishing, it is recommended to use a clay bar to remove surface particles and contaminants from the paint. When polishing the hood, cover the windshield with a large towel or masking film to prevent polishing wax from sticking to the glass seals and wipers, which can be difficult to remove. Control the speed of the polishing machine and do not exceed the selected speed range. Maintain consistent polishing direction and follow a systematic sequence. When changing polishing compounds, also replace the foam pad to avoid cross-contamination.

19

3

Share

What brand of motorcycle is Regnancy?

Regnancy is a Recadi brand motorcycle. Below are relevant introductions about motorcycles: 1. Composition: A motorcycle consists of five main parts - the engine, transmission system, running gear, steering, braking system, and electrical instrumentation equipment. 2. Starting method: Motorcycles primarily use kick-start mechanisms. The starting mechanism includes the sector gear starting mechanism represented by the Xingfu XF250 motorcycle. The kick-start gearshift lever drives the sector gear, starter ratchet, clutch assembly sprocket, front chain, and crankshaft sprocket to rotate the crankshaft and start the engine.

2

1

Share

How to Operate a Column Shifter?

Here are the steps to use a column shifter: 1. When shifting gears, press the brake and then move the gear lever. 2. It works the same as a regular automatic transmission car. 3. After starting, it is in the neutral position (N). Pushing up is reverse gear (R), and pushing down is drive gear (D). 4. When parking, press the brake to shift into neutral (N), then press the external button to engage parking gear (P). Here is some related information about column shifters: 1. The column shifter button is for parking gear (P). Gently pushing the lever forward or backward puts it in neutral (N). 2. Pushing it firmly forward engages reverse gear (R). 3. Pushing it firmly backward engages drive gear (D). 4. The handbrake is replaced by the parking gear (P).

10

5

Share

Under what circumstances will the car alarm go off?

Here are the situations when the car alarm will be triggered: external force knocking, violent car smashing, door lifting, unauthorized entry into the vehicle without deactivating the alarm, firecrackers going off, or vibrations from large vehicles passing by. The reasons why a car alarm suddenly goes off are as follows: 1. Alarm sensitivity issue: If the car alarm keeps sounding, the alarm sensitivity may be too high, making it prone to activation with even slight shaking. 2. Alarm wiring problem: When the car alarm produces abnormal noise, there may also be an issue with the main wiring of the alarm, requiring inspection, repair, or replacement. 3. Incorrect alarm installation: If a newly installed alarm on your car frequently triggers without reason, it may be due to improper installation of the alarm. 4. Other issues: If the door is not properly closed, the alarm will emit abnormal sounds. Even in the case of a short circuit, the car alarm may continuously sound, draining the battery.

20

3

Share

What Causes the Car to Jerk When Starting?

When starting, especially when the engine is cold, the car jerks, which is usually caused by dirt on the throttle body. Below are the reasons why the car jerks when starting: 1. Carbon buildup causes the throttle valve to rotate less responsively, affecting the accuracy of the air-fuel mixture parameters or preventing sensors from accurately providing feedback to the servo. Cleaning the throttle body can resolve this issue. 2. It may be due to excessive carbon buildup in the engine. Below are the related symptoms caused by carbon buildup in different parts: 1. Cleaning the throttle body mainly addresses unstable engine idling and stalling. 2. Excessive carbon buildup in the combustion chamber: Increases the engine's compression ratio, creating multiple hot spots, leading to pre-ignition and knocking, shortening engine life, and significantly reducing engine power and fuel efficiency. 3. Carbon buildup on the fuel injectors: Causes uneven fuel injection across cylinders, resulting in engine shaking or stalling. 4. Excessive carbon buildup on spark plugs: Causes spark plug misfiring, leading to engine shaking. 5. Excessive carbon buildup on the throttle body: Causes unstable idling, reduced power, or even stalling. Check if the idle control valve has excessive carbon buildup, leading to this issue.

20

0

Share

What is the function of the DC-DC converter in new energy vehicles?

New energy vehicle DC-DC converter functions as follows: The new energy DC/DC converter can perform high-frequency switching operations through controllable switches. Below are relevant introductions about DC/DC: 1. Composition: DC-DC converters generally consist of control chips, inductor coils, diodes, transistors, and capacitors. 2. Classification: DC/DC converters are divided into three types: boost DC/DC converters, buck DC/DC converters, and buck-boost DC/DC converters. PWM control type offers high efficiency with good output voltage ripple and noise performance. PFM control type has the advantage of low power consumption even during prolonged use, especially under light loads. PWM/PFM conversion type implements PFM control under light loads and automatically switches to PWM control under heavy loads.

18

0

Share

What are the reasons for the non-functioning of the turn signals and hazard lights in the Fit?

Why does car paint turn white and lose its gloss after polishing?

What brand of motorcycle is Regnancy?

How to Operate a Column Shifter?

Under what circumstances will the car alarm go off?

What Causes the Car to Jerk When Starting?

What is the function of the DC-DC converter in new energy vehicles?

What is the reason for the Wuling Zhiguang wiper not moving?

How to check the remaining kilometers on the BORGWARD BX5?

Why does the motorcycle make a clunking sound when shifting gears?

What does a dual VVT engine mean?