What are the reasons for the non-functioning of the Baojun 530 cornering light?

[VanAdaline]

The reasons why the Baojun 530 cornering light does not work are as follows: 1. There is a loose connection in the filament or lamp holder inside the bulb; 2. The sensor or control circuit is faulty; 3. The circuit is broken; 4. The flasher relay is faulty; 5. The contact gap is too large. The solutions are as follows: 1. Open the flasher relay cover and check whether the coil and resistor are intact. If the resistor is hot and the contacts cannot close, press the movable contact. If the turn signal lights up at this time, it indicates that the relay is faulty, and the contact gap should be adjusted; 2. If the turn signal does not light up when the movable contact is pressed and the contact is closed, use a screwdriver to short-circuit the contact. If the light comes on at this time, it means the contact is oxidized and needs to be replaced; 3. If the turn signal does not light up when the contact is pressed, the turn signal switch may be faulty. Use a screwdriver to connect the turn signal switch live wire to the left and right lamp wire terminals respectively. If the light comes on, it means the turn signal switch is faulty and should be removed for repair or replacement.