What are the reasons for the non-functioning of the automatic start-stop in the Sagitar?

1 Answers
OEthan
07/29/25 4:37pm
Vehicle not reaching the ideal working state may be due to insufficient battery charge or voltage; engine coolant temperature being too high or too low; vehicle not meeting the driver's settings, with the set air conditioning temperature differing too much from the interior temperature; during low-speed driving, the starting speed not reaching 5 km/h, or repeated acceleration with speed below 15 km/h. Here is additional information: 1. Automatic Start-Stop: Engine automatic start-stop automatically shuts off the engine when the vehicle comes to a temporary stop during driving. When moving forward again, the system automatically restarts the engine. The engine automatic start-stop intelligent fuel-saving system is a set of systems that control engine start and stop. 2. Battery: Automatic start-stop primarily relies on the battery's capacity. Since starting a car consumes a large amount of power due to the high current, vehicles equipped with this function use high-capacity batteries resistant to high-current impacts. When the battery charge drops to a certain level and can no longer provide the required high current, the automatic start-stop function will automatically disable to protect the battery's lifespan.
Was this review help?
5
0
Share
More Forum Discussions

What is the setting method for the trip computer display on the Audi Q5?

Audi Q5 trip computer display setting method: Control settings are made through the button area on the left side of the steering wheel. The MODE button on the steering wheel is used to select pages, while the scroll wheel serves as the switch to browse the next option. Four different display pages can be accessed: speedometer, instant fuel consumption meter, range meter, and average speed meter. The onboard computer, also known as the trip computer or electronic control module, processes data from various sensors in the car and sends signals to control engine operation. The Audi Q5 features a distinctive large grille front face, stylish and attractive overall design, smooth and flowing body lines. It is equipped with a 2.0TFSI four-cylinder inline engine and a 7-speed Stronic dual-clutch transmission, delivering ample power output and smooth gear shifting.
7
5
Share

What is the door opening style of the BYD Han?

The BYD Han features a coach door (suicide door) opening style. Here are some key details about the BYD Han: 1. Exterior: The BYD Han is a mid-to-large size sedan under the BYD brand, with a wheelbase of 2920mm, and dimensions of 4980mm in length, 1910mm in width, and 1495mm in height. 2. Configuration: The front suspension uses MacPherson independent suspension, while the rear employs a multi-link independent suspension system, which enhances both handling and ride comfort. 3. Powertrain: The 2.0L turbocharged engine delivers 192 horsepower and 320 N·m of maximum torque, featuring direct fuel injection technology with an aluminum alloy cylinder head and block. Paired with this engine is an electric motor producing maximum power of 180kW and maximum torque of 330 N·m.
20
1
Share

How to Reset the Tire Pressure Monitoring Warning Light After Pressure Check?

Tire pressure monitoring warning light can be cleared by restarting the tire pressure monitoring system after resetting it. Below are the reasons why the dashboard displays the tire pressure monitoring warning light after a pressure check and requires a restart: 1. It indicates insufficient air pressure in one of the four wheels, likely due to a punctured or leaking tire. It's best to visit a tire repair shop to check if the tire pressure is normal. 2. You can inflate both sides to the same pressure or perform a tire pressure reset on the dashboard. As long as the tire pressure is confirmed to be normal, there's no immediate issue. You can visit a 4S shop for a reset when convenient or refer to the owner's manual to perform the reset yourself. 3. If the tire pressure is normal, there's no need to worry too much. Some larger car washes or repair shops with diagnostic computers can also clear the warning.
17
2
Share

What is the ABS pump VSA solenoid valve failure in the eighth-generation Accord?

The causes of the ABS pump VSA solenoid valve failure in the eighth-generation Accord: Internal damage to the ABS module, timely repair at a 4S shop is required. Below are the relevant introductions: 1. Definition: The ABS system, commonly known as the anti-lock braking system, is primarily designed to prevent vehicle wheel slippage causing rollovers, while also shortening braking distance, reducing brake wear, and extending the service life of brake discs and tires by twofold. 2. Importance: The Anti-lock Braking System (ABS) is an active safety feature in vehicles. The ABS system is considered the most significant technological achievement in vehicle safety since the introduction of seat belts. Vehicles without an ABS system, when encountering emergencies (especially in rainy or snowy conditions), are prone to losing directional stability, experiencing wheel lock-up, meaning the steering wheel cannot be turned, leading to increased risk factors and a higher likelihood of accidents.
20
3
Share

What does SUV value mean?

SUV value refers to the model of a car. The following is an introduction about cars: 1. Introduction to cars: A means of transportation, mainly used for carrying people or goods, or towing vehicles that carry people or goods. 2. History of car development: (1) Jet-powered: In 1680, the famous British scientist Newton conceived a plan for a jet-powered car, using steam ejected from a nozzle to propel the car, but failed to make a physical prototype. (2) Steam-powered: In 1769, the Frenchman N-J Cugnot built a three-wheeled car powered by steam generated from burning coal gas. (3) Gasoline: The year 1885 was a decisive breakthrough in the invention of the automobile. (4) Electric: The world's first research on electric vehicles was completed by the Hungarian engineer Ányos Jedlik in 1828 with an electric transmission device in the laboratory.
1
1
Share

Will Losing the Driving School Student ID Affect the Exam?

It does not affect the exam. The student ID is not required for the exam; it is used to log training hours. If the exam has already been scheduled, losing the student ID will not impact the exam. You can inform the driving school later and apply for a replacement student ID. Below is additional information: 1. Subject 1: The full score is 100, and a score of 90 or above is considered passing. 2. Subject 2: The full score is 100, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. 3. Subject 3: The full score is 100, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.