What are the reasons for the Nissan Teana car showing no response?

1 Answers
VonLincoln
07/30/25 9:51am
The reasons for the Nissan Teana car showing no response are as follows: Battery depletion: Generally, battery depletion is caused by improper usage by the owner, such as forgetting to turn off the headlights when parking or connecting too many external electrical devices. A car that cannot start due to battery depletion usually manifests as the starter not working during ignition. If the starter does not work during ignition, it can basically be confirmed that the issue is caused by battery depletion. Therefore, it is important to pay attention to the indicator lights on the dashboard. Gear not in P position when starting: For owners of automatic transmission cars, because automatic transmissions do not require frequent manipulation of the gear lever, they may forget to shift to P gear or leave it in N gear when parking. When starting the car again, they might not notice and attempt to start it directly. In this case, simply shift to P gear and start the car again.
Was this review help?
12
4
Share
More Forum Discussions

What are the body dimensions of the Bentley Bentayga?

The Bentley Bentayga has a length, width, and height of 5125/1998/1728 mm, which are official data. The length of the Bentley Bentayga refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Bentley Bentayga's engine has a maximum power of 250 kW and a maximum torque of 450 Nm. The Bentley Bentayga is equipped with a 3.0-liter V6 turbocharged engine, which features direct fuel injection technology and an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 94 kW and a maximum torque of 350 Nm. The vehicle uses an 8-speed automatic transmission (8AT), providing smoother shifting and better reliability and durability. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to meet the requirements of public road usage.
11
4
Share

How to Turn Off a Keyless Automatic Transmission Car?

Keyless automatic transmission refers to an automatic transmission with a one-button start. The steps to turn off the engine are as follows: 1. First, press the brake to stop the car, then shift the gear from D (Drive) to N (Neutral), and engage the mechanical handbrake or electronic handbrake. 2. Press the brake again, then shift the gear from N (Neutral) to P (Park). 3. Finally, release the foot brake and press the one-button start button to turn off the engine. Additional details are as follows: 1. Turning off the engine without shifting to P (Park) will not harm the car. You can park the car in N (Neutral) or P (Park). P (Park) is designed based on N (Neutral) specifically for parking. For example, when waiting at a traffic light on a flat road for a long time, you can shift to N (Neutral) and engage the handbrake. If parking on a slope, to prevent the car from rolling, shift to P (Park) and also engage the handbrake. 2. In terms of safety design, an automatic transmission car will not turn off in D (Drive) unless there is an engine system failure. If the car has an automatic start-stop function, it is normal for the engine to turn off automatically in D (Drive). However, when the accelerator is pressed, the car system will complete operations such as background startup, allowing the car to continue driving.
19
5
Share

What is the BMW 5 Series xDrive?

BMW 5 Series xDrive refers to the all-wheel-drive sports version of the BMW 5 Series. Here is more information about the BMW 5 Series xDrive: 1. The BMW 5 Series xDrive comes in two models: the 530Li xDrive M Sport and the 530Li xDrive Luxury Package. 2. The BMW 5 Series xDrive is a mid-to-large-sized car with dimensions of 5087mm in length, 1868mm in width, and 1500mm in height, and a wheelbase of 3108mm. 3. xDrive is BMW's patented intelligent all-wheel-drive system, designed to help the vehicle better handle road conditions, especially on slippery curves, low-traction uphill roads, and icy surfaces, ensuring stable driving. 4. Exterior: The front features the classic kidney grille, iconic LED angel-eye headlights, and large LED taillights, while the xDrive badge on the lower left corner of the rear adds a premium touch. 5. Powertrain: Equipped with a 2.0L high-power engine paired with ZF's 8AT transmission, it delivers a maximum power of 252 horsepower and a peak torque of 350 Nm, achieving a 0-100 km/h acceleration in just 6.7 seconds.
15
2
Share

Is Engine Oil the Same as Gear Oil?

Gear oil is not engine oil. Gear oil, also known as transmission oil, is used in automotive transmissions. It is primarily composed of petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form a transmission lubricant. It is used to lubricate various gears in transmissions, reducers, and differentials to prevent gear surface wear, scuffing, sintering, etc., thereby extending service life and improving power transmission efficiency. Below is relevant information about engine oil: Engine oil is used in automotive engines and is a type of engine lubricant composed of base oil and additives. Depending on the base oil, it is classified into semi-synthetic oil, fully synthetic oil, and mineral oil. Inside the engine, it performs functions such as cleaning, lubricating, and cooling components. It operates in high-temperature and high-pressure environments for extended periods, requiring high oxidation resistance and stronger shear resistance.
15
5
Share

Does a small car need to go through the inspection line in its 6th year?

Vehicles in their sixth year require on-site inspection during the annual review. More details are as follows: 1. If it's a new car purchased within the last 6 years, it can be exempt from inspection twice (requiring only the application for an inspection decal every two years, without the need for on-site vehicle inspection); in the 6th and 8th years, the vehicle must undergo on-site inspection. 2. For private cars over 10 years old, the original inspection cycle still applies, i.e., annual inspections for vehicles between 10 and 15 years old, and semi-annual inspections for vehicles over 15 years old. 3. The owner of the motor vehicle can apply for an inspection compliance decal at the vehicle registration authority within three months before the expiration of the current inspection validity period. Motor vehicle safety technical inspection institutions must inspect vehicles in accordance with the national motor vehicle safety technical inspection standards and bear legal responsibility for the inspection results. The quality and technical supervision departments are responsible for implementing measurement certification management for motor vehicle safety technical inspection institutions, verifying the inspection equipment, and supervising the implementation of national motor vehicle safety technical inspection standards.
18
3
Share

How many seats can a C-class license drive?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", a Class C1 license for small cars can drive manual or automatic transmission small and mini passenger vehicles with 9 seats or fewer (including 9 seats), as well as light and mini cargo vehicles (all small trucks with blue license plates), light, small, and mini special operation vehicles, and small automatic transmission cars (Class C2), low-speed cargo vehicles (Class C3), and three-wheeled vehicles (Class C4). Here is a related introduction about the differences between Class A, B, and C licenses: 1. Permitted vehicle types. Class A can drive large buses, tractors, and city buses; Class B can drive medium-sized buses and large trucks; Class C can drive small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled vehicles, and small automatic transmission passenger vehicles for the disabled. 2. Age restrictions for application. Those aged 21 or older can apply for city buses with a capacity of 10 or more passengers (Class A3); those aged 24 or older can apply for heavy and medium-sized full trailers or semi-trailers (Class A2); those aged 26 or older can apply for large passenger vehicles (Class A1). Those aged 21 or older can apply for medium-sized passenger vehicles (Class B1) or heavy and medium-sized cargo vehicles, large, heavy, and medium-sized special operation vehicles (Class B2). 3. Initial application age restrictions. The age for applying for a learner's permit for large buses and trolleybuses is 21 to 45 years; for large trucks, it is 18 to 50 years; for other vehicle types, it is 18 to 60 years. For those over 60 years old, the permitted vehicle types A, B, N, and P will be revoked. 4. Driving test passing standards. For Class C vehicles, a score of 80 or above is passing; for Class A and B vehicles, a score of 90 or above is passing. Tests for large buses, tractors, city buses, medium-sized buses, and large trucks include additional items such as simulated highways, continuous sharp mountain roads, tunnels, emergency handling, and narrow road U-turns. 5. Application conditions. Applicants for large buses, large trucks, or trolleybuses must be at least 155 cm tall; for other vehicle types, the minimum height requirement is 150 cm.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.