What are the reasons for the network failure in Delong X3000 vehicles?

1 Answers
StAnderson
07/30/25 8:23am
If the vehicle does not have an onboard network, it may be caused by poor antenna contact, circuit failure, local network coverage issues, or signal interference. Extended information is as follows: 1. Onboard: The term 'onboard' naturally refers to products specifically designed for use in automobiles, facilitating usage during vehicle movement. The most commonly seen onboard products include onboard MP3, MP4, GPS, onboard DVD, onboard hard drive players, onboard power supplies, onboard refrigerators, onboard massagers, onboard computers, onboard TVs, onboard hard drive players, onboard air purifiers, onboard USB video recorders, etc. 2. Onboard Network: The onboard network refers to the early method of communication between sensors, controls, and actuators within a car, connected through point-to-point wiring to form a complex mesh structure.
Was this review help?
19
3
Share
More Forum Discussions

Is the rear seat folding completely flat in the Tiguan L?

Tiguan L's rear seat folding is not completely flat. There are two ways to fold the rear seats: split-folding and full-folding. Full-folding rear seats: This means the backrest of the rear seats is a single unit. When more space is needed, the backrest of the rear seats can be folded down to provide additional space. However, when the rear seats are folded down, they cannot accommodate passengers. Split-folding rear seats: This means the backrest of the rear seats can be folded down in a certain ratio. Compared to full-folding, split-folding offers greater flexibility. You can fold down only half of the backrest to place large items while the remaining part can still be used for seating. Different models have different folding ratios.
2
1
Share

Where is the fuel button for the Cayenne?

Cayenne's fuel tank cover and car doors share the same locking system. If the car door lock is in the unlocked state, the fuel tank cover can be opened with a light press. How to check fuel level: Check the fuel gauge, which indicates the amount of fuel remaining in the car's fuel tank. It can be either a pointer or a digital display. The low fuel warning light activates when the fuel level in the tank drops below a certain threshold. Fuel tank capacity: This refers to the size of the fuel tank, measuring how much fuel a vehicle can hold. The fuel tank capacity determines the driving range. For two cars with identical engines, the one with a larger fuel tank can travel farther. Most drivers know their vehicle's fuel tank capacity through either the manufacturer's specifications in the user manual or practical refueling experience.
1
5
Share

What are the warning lights on the HOWO T7?

HOWO T7 warning lights include the engine coolant temperature warning light, brake fault warning light, and ABS warning light. Engine Coolant Temperature Warning Light: The engine coolant temperature fault indicator and dashboard display indicate that the engine coolant temperature is too high, signaling a fault. Possible causes include insufficient coolant in the radiator, a faulty coolant temperature sensor, or a malfunction in the cooling system circulation. Brake Fault Warning Light: When the brake fault indicator light comes on, it may indicate that the brake pads are worn to their limit, the brake pads are missing, or there is a short circuit in the wiring. If the brake light malfunctions, you should stop to check whether there is a problem with the brakes and whether the vehicle can stop properly, then drive to a nearby repair shop for inspection as soon as possible. ABS Warning Light: When the ABS warning light comes on, you should also pay attention to the vehicle's braking issues and identify the problem. It could be due to dirt on the wheels causing signal interruption or a burned-out sensor. Timely detection and inspection are necessary to reduce safety hazards.
2
3
Share

How to Solve the Issue of BMW 525 Oil Temperature Exceeding 120°C?

Solutions for BMW 525 oil temperature exceeding 120°C: 1. Low RPM When both the car's coolant temperature and oil temperature rise simultaneously, the primary task is to lower the oil temperature first. Reducing oil temperature is typically achieved by "reducing load and lowering RPM." At this time, although the coolant takes longer to exchange heat at high-temperature components, the slower water flow rate extends the cooling time. Additionally, due to reduced load and lower RPM, the heat generated by friction in moving parts also decreases accordingly. Therefore, lowering the oil temperature not only reduces the heat generated by the engine but also indirectly decreases the heat absorbed by the coolant, thereby slowing the rate at which the coolant temperature rises. 2. Causes: A clogged oil filter causes oil to enter the main oil passage directly through the bypass valve, leading to impurities in the oil. Poor sealing of piston rings and cylinder leakage increase the ventilation volume in the crankcase, causing oil to be expelled with the ventilation. These factors can all result in excessively high oil temperature.
20
0
Share

What is the speed limit on the Cangshuo Expressway?

The speed limit on the Cangshuo Expressway is 100 kilometers per hour. Expressway speed limit regulations: Expressways shall indicate the driving speed of lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not lower than 60 kilometers per hour. On expressways, the maximum speed for small passenger vehicles shall not exceed 120 kilometers per hour, while other motor vehicles shall not exceed 100 kilometers per hour, and motorcycles shall not exceed 80 kilometers per hour. Precautions for driving on expressways: When encountering low visibility weather conditions such as fog, rain, snow, dust, or hail on expressways, and visibility is less than 200 meters, drivers should turn on fog lights, low beam lights, marker lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and a distance of more than 100 meters should be maintained from the vehicle in front in the same lane.
1
2
Share

What are the reasons for the ABS and tire pressure warning lights illuminating simultaneously?

When both the ABS and tire pressure monitoring system warning lights illuminate, it indicates that the vehicle's braking system and steering system sensors have detected faults, triggering the corresponding warning lights. A comprehensive inspection at a 4S shop is required to determine the exact issue with the vehicle. Driving is not recommended when the ABS light is on: Because an illuminated ABS light signifies a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. Method to reset the tire pressure warning light: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.