What are the reasons for the loss of communication between u0101 and the transmission?

1 Answers
McMorgan
07/29/25 1:07pm
u0101 loses communication with the transmission due to: 1. Issues with the CAN high and CAN low line connections; 2. Problems with the input and output circuits of the body control module; 3. Radio interference from other high-current lines on the CAN data line. The functions of the transmission are: 1. To change the gear ratio to meet the traction needs under different driving conditions; 2. To enable reverse driving; 3. To interrupt power transmission to the drive wheels when the engine starts, idles, the car shifts gears, or needs to stop for power output. Transmission maintenance methods include: 1. Regularly checking the fluid level; 2. Avoiding skipping gears when upshifting; 3. Not forcing the transmission into neutral; 4. Not shortening the idle warm-up time; 5. Avoiding gear grinding when shifting.
Was this review help?
18
5
Share
More Forum Discussions

What are the precautions for cleaning a car's air conditioning system?

Precautions for cleaning a car's air conditioning system are as follows: 1. When using cleaning solution or foam, ensure the air conditioning drain is unobstructed to prevent water accumulation that could damage electrical components. 2. After cleaning, open the car doors and preferably air dry for one hour. 3. Upon completion of the operation, use diagnostic equipment to check the system computer for any fault codes. Verify all functions are operating normally. 4. Replace the cabin air filter after cleaning. Generally, it's recommended to replace the cabin air filter at least once a year. The replacement process for electric vehicle cabin air filters is the same as for fuel-powered vehicles. Detailed steps for cleaning a car's air conditioning system: 1. First locate the air intake vent connected to the air outlets, typically positioned at the lower right side of the windshield or beneath a central cover panel. 2. Set the air conditioning fan to maximum speed and activate the external circulation mode. 3. Open the intake vent cover using hands or a screwdriver. 4. Connect the tube attached to the cleaner and spray into the intake vent, reapplying every few seconds (rather than continuous spraying) to allow circulation. The blower will draw the cleaner into the air ducts. Change circulation modes to ensure all ducts are cleaned. 5. After 15 minutes, turn off the air conditioning. The cleaner will drain out with condensation water. When no more condensation flows from the ducts, turn on warm air to evaporate residual cleaner inside the system, then leave windows open for ventilation. 6. The car's air conditioning cleaning process is now complete.
1
3
Share

What are the maintenance methods for automotive turbochargers?

Turbocharger maintenance methods include: regularly changing engine oil and oil filters, frequently cleaning the turbo, avoiding immediate shutdown, and correctly selecting and using appropriate engine oil. As an air compressor, the turbocharger can enhance engine power output and improve fuel economy, but daily maintenance is crucial. Otherwise, the lag sensation of the turbocharger may become more pronounced. The following points should be noted for turbocharger maintenance: 1. Regularly change engine oil and oil filters: Oil consumption and lubrication are key aspects of turbocharging technology. Using the manufacturer-recommended engine oil can reduce the lack of lubrication and heat dissipation for the floating turbo main shaft. 2. Frequently clean the turbo: If the lubrication capability of the oil declines, it can lead to premature failure of the turbocharger. Clean or replace the air filter on time to prevent dust and other impurities from entering the high-speed rotating turbocharger impeller. 3. Avoid immediate shutdown: After a running engine is suddenly shut down, the oil pressure drops to zero, and the high temperature from the turbocharger's turbine section transfers to the middle, where the heat cannot be quickly dissipated. If the exhaust manifold temperature is very high at this time, its heat will be absorbed by the turbocharger housing, turning the residual oil inside the turbocharger into carbon deposits. 4. Correctly select and reasonably use engine oil: Generally, turbocharged engines require the use of full synthetic oil, and the oil change interval should be reasonably determined based on usage conditions. Be sure to avoid using counterfeit or non-compliant engine oil, as this can cause abnormal wear or severe coking of the turbo, thereby damaging the turbocharger.
10
4
Share

Where is the jack located on the RAV4?

In the trunk. Here is some relevant information about the RAV4: 1. Introduction: The Toyota RAV4 is the basic model in Toyota's compact multi-purpose off-road vehicle family. Its name comes from the abbreviation of "Recreational Active Vehicle with 4-wheel drive," meaning "four-wheel drive recreational sports vehicle." 2. Model: It adopts a completely new exterior and interior design style, with the overall shape further evolving towards an urban SUV, while the off-road style gradually fades from this model. 3. Positioning: The RAV4 combines high quality and performance with driving comfort and excellent off-road capability, allowing it to adapt freely to both ON ROAD and OFF ROAD conditions, meeting the needs of diverse lifestyles.
5
0
Share

Which country produces Ora cars?

Ora cars are produced in China. Here is the relevant introduction: Introduction to the Ora car brand: The Ora brand belongs to Great Wall Motors and is the first independent new energy vehicle brand among mainstream Chinese automakers. Among Chinese automotive companies, Great Wall was the first to establish new energy vehicle operations as an independently managed new energy brand. Brand positioning of Ora cars: Ora positions itself as a car brand that loves women more, committed to establishing correct values in the industry towards female users. Based on China's first dedicated electric vehicle platform, the ME platform, Ora creates a series of high-quality products for users, market and user-oriented, rejecting 'oil-to-electric conversions' and avoiding 'policy arbitrage vehicles'.
9
2
Share

What does it mean when the ECO light comes on in the car?

When the ECO indicator on the dashboard lights up, it indicates that the vehicle's economy mode has been activated. ECO is an English abbreviation derived from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the ECO indicator on the dashboard lights up, it indicates that the vehicle's economy mode has been activated. ECO mode is divided into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator lights up, and the vehicle automatically begins to adjust settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active ECO mode does not have a dedicated button. When the dashboard ECO indicator lights up, it serves only as a reminder function. ECO automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator. Most vehicles use the active ECO driving mode, which means they have a dedicated switch button. Therefore, you can activate ECO mode during daily driving. However, it is unnecessary to activate ECO mode when driving at speeds exceeding 120 km/h, during idling, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of ECO but also affect the vehicle's power. In addition, ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, and the ECO mode automatically deactivates. During idling or when in N/P gear or manual mode, the ECO mode may also become ineffective. When high torque output is required, such as when climbing hills, the engine control unit prioritizes providing sufficient power to drive the vehicle, and the ECO mode will not function in such cases.
3
3
Share

What is the Chinese name for the Nissan Armada?

Nissan Armada is called 'Fleet' in Chinese. Below is an introduction to the Nissan Armada: 1. Model Overview: The new car is a mid-term facelift, with the overall design largely following the styling of the new Nissan Patrol. It is still powered by a 5.6-liter V8 engine. 2. Model Positioning: The Armada is a full-size SUV specifically launched by Nissan for the American market, similar in size to the Patrol but with a more American-style exterior. 3. Exterior Design: The front features Nissan's iconic 'V-shaped' grille, which is more robust in size and more recognizable. The uniquely designed headlight cluster creates a split-headlight effect, enhancing the vehicle's sense of technology.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.