What are the reasons for the loose chassis of the Kia K5?

1 Answers
CoraRose
07/25/25 5:37am
The reasons for the loose chassis of the Kia K5 are: 1. Worn and loose parts; 2. Rubber aging; 3. Poor driving habits. The Kia K5 is a sporty high-end sedan from Dongfeng Yueda Kia, with a body length, width, and height of 4855mm, 1860mm, and 1475mm respectively, and a wheelbase of 2805mm. The Kia K5 is equipped with the II series gasoline engines, available in 2.0L and 2.4L versions, with maximum output power reaching 163 horsepower and 174 horsepower respectively. It features dual CVVT and VIS technology and is paired with a 6-speed automatic transmission. In terms of safety, the Kia K5 has a front MacPherson strut independent suspension and a rear multi-link independent suspension, along with configurations such as tire pressure monitoring and seatbelt reminder.
Was this review help?
11
0
Share
More Forum Discussions

How to Adjust the Rearview Mirrors on an Audi A4?

Audi A4 rearview mirror adjustment methods: 1. Center rearview mirror: Adjust the left and right positions so that the left edge of the mirror just cuts off the right ear of your reflection in the mirror. 2. Left side mirror: Adjust the up and down positions to place the distant horizon in the center, and the left and right positions so that the car body occupies one-fourth of the mirror's area. 3. Right side mirror: The up and down positions should cover about two-thirds of the mirror, and the left and right positions should be adjusted so that the car body occupies one-fourth of the area. The Audi A4 is a B-class model manufactured by FAW-Volkswagen, with body dimensions of 4761mm in length, 1826mm in width, and 1439mm in height, and a wheelbase of 2869mm. In terms of power, the Audi A4 is equipped with 1.8T, 2.4T, and 3.0T engines, with the 3.0 version additionally featuring the quattro all-wheel-drive system.
3
1
Share

How to Match the Headlights After Replacement on a Passat?

Matching method for replacing headlights on a Passat: Turn on the ignition switch, connect the MS906S to the vehicle to ensure normal communication, use the VIN code intelligent recognition function to quickly enter the vehicle model with one click, then select programming for matching. It is best to go to a 4S shop and let professionals operate the matching. The Passat is a mid-size sedan, classified as a B-class car in the Volkswagen lineup, with body dimensions of 4933mm in length, 1836mm in width, and 1469mm in height. In terms of power, the Passat is equipped with two turbocharged engines, 1.4t and 2.0t, with maximum power outputs of 110kw and 137kw, and maximum torques of 250nm, 320nm, and 350nm.
6
4
Share

Why does the engine fault light come on after starting the car?

Here are the detailed reasons why the engine fault light comes on after starting the car: 1. The vehicle fault light is usually caused by the fuel emission system. 2. When the computer receives the parameters from the oxygen sensor and the exhaust emissions seriously exceed the national legal standards. Poor combustion state: Poor engine combustion state is the main reason for the engine fault light to come on. 3. Engine knocking, usually there are three situations: (1) The car does not move. (2) The car moves, but the engine noise is too loud. (3) There is an obvious knocking sound from the cylinder. 4. Internal reasons for the engine fault light to come on: (1) Poor fuel quality. (2) The engine cylinder is not clean and has accumulated carbon deposits. 5. The computer cannot obtain engine data. 6. False fault. A fault code is reported, but the operation is normal, which may be due to an operation that exceeds the computer's control range, and the computer feedbacks a fault code.
1
0
Share

Are Older Vehicles No Longer Required to Undergo Biannual Inspections?

Vehicles aged over 15 years are exempt from the biannual inspection requirement. Annual Inspection Notes: Bring valid compulsory traffic insurance and the vehicle registration certificate to the inspection station. Before inspection, ensure all traffic violations and accidents involving the vehicle are resolved. If the vehicle type noted on the registration certificate is a medium or larger passenger or cargo vehicle, it must be inspected by traffic police at the local vehicle management office before undergoing inspection at the designated station. Small vehicles can be inspected at any station within the city. Inspection Process: Fill out the Motor Vehicle Inspection Mark Application Form and submit the required documents; drive the vehicle to the inspection entrance and wait for inspection; when it's your turn, drive the vehicle into the inspection station; pass the online inspection, then proceed to the payment window. After about 15 minutes, you can collect the inspection report, environmental label, and the stamped copy of the vehicle registration certificate.
4
3
Share

How to Open the Car Fuel Filler Cap?

Methods to open the car fuel filler cap: 1. The in-car button switch is currently the most common way to open the fuel filler cap. The switch may be located in different positions depending on the car model, such as on the floor to the left of the driver's seat, on the left front door panel, or on the center console. The symbol is usually a fuel pump icon. 2. Besides this, there are two other methods: pressing to open and using a key to open. On the dashboard, the fuel tank symbol has a small arrow. If the arrow points to the left, it means the fuel filler cap is on the left side of the car. If the arrow points to the right, it means the fuel filler cap is on the right side. The fuel filler cap is the cover on the car used to seal the fuel tank. It is square-shaped, made of stainless steel, and has excellent sealing, with only a small circular opening.
4
5
Share

How long can a car sit before the battery dies?

If a car sits for more than three months, the battery will die. Reasons for battery discharge over time: Automotive batteries are primarily starting-type lead-acid batteries. All batteries share one characteristic: self-discharge. This means even when the car battery isn't connected to any electrical components or under any load, it will gradually lose charge. Of course, the rate of discharge depends somewhat on the battery's manufacturing quality. Measures to prevent battery discharge: To avoid battery drain in long-term parked vehicles, the best practice is to start the engine periodically, allowing the car's alternator to recharge the battery. If the battery is in good condition, starting the car about every two weeks and running it at around 2,000 RPM for approximately half an hour should be sufficient to replenish the self-discharged power.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.