What are the reasons for the Lavida's headlights not working?

1 Answers
VonDallas
07/29/25 6:12pm
The reasons for the Lavida's headlights not working: 1. Severe battery depletion; 2. Overheating of wires leading to increased resistance and reduced headlight intensity; 3. Corrosion or bonding of contacts in the lighting relay or combination switch, preventing the circuit from opening or closing; 4. Blown fuse in the headlight circuit; 5. Damage to the generator's diodes and coils due to prolonged overload when using multiple electrical devices, causing the generator to fail to produce electricity. The Lavida is a car produced by SAIC Volkswagen, with dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm.
Was this review help?
2
1
Share
More Forum Discussions

What are the symptoms of a clogged fuel injector?

The symptoms of a clogged fuel injector include: 1. Engine shaking; 2. Unstable idle; 3. Reduced vehicle power and performance, such as unresponsive throttle or uneven acceleration; 4. Increased engine noise; 5. Slight misfiring sensation when upshifting at low RPM; 6. Higher fuel consumption; 7. Failed exhaust emissions. The common causes of fuel injector clogging are carbon deposits accumulating on the injector or impurities in the gasoline blocking the injector pathways. Gasoline inherently contains gums and impurities. Additionally, unstable components in gasoline can react under certain temperatures, forming sticky gum and resin-like substances. Coupled with urban traffic congestion, where cars often operate at low speeds or idle, these conditions further promote the formation and accumulation of such deposits.
5
2
Share

What Causes a Car to Overheat?

The causes of car overheating: 1. Insufficient engine coolant; 2. Water pump failure, worn or loose drive belt; 3. Thermostat main valve fails to open or opens too late; 4. Louvers cannot fully open; 5. Dirty, damaged radiator fins or clogged radiator cooling tubes; 6. Scale buildup in the water jacket and distribution pipes. If the engine suddenly overheats during operation, it may be due to a broken fan drive belt, the water pump shaft and impeller disengaging, leaks in the cooling system (such as aging or ruptured hoses), or the thermostat main valve falling off. Generally, there are many reasons for engine overheating, and it is recommended that car owners visit a repair shop for inspection and maintenance. Regardless of the cause, overheating can affect driving safety.
14
5
Share

How to Match Nissan Sylphy Key?

Nissan Sylphy matches keys through a password. More information about Sylphy key matching is as follows: 1. The password can be read with a special instrument, and the owner needs to provide documents: Password reading does not require disassembling any parts, but the owner needs to provide ID card, driving license, and other documents to read the password. 2. Key matching can choose between keys with start function and keyless start keys: After reading the password, keys can be matched. The price for matching a key is about two to three hundred, while matching a keyless start key costs about five to six hundred. The remote key can conveniently unlock and lock the car from a distance during both day and night without the need to locate the keyhole.
17
4
Share

What is the general fuel tank capacity of a car in liters?

Generally, the fuel tank capacity of small cars ranges from 35 to 45 liters, while that of medium-sized cars ranges from 55 to 75 liters. After filling up the tank, the car can usually travel about 500 kilometers. Depending on the engine displacement, cars with higher fuel consumption have larger fuel tanks, while those with lower fuel consumption have smaller ones. During the actual refueling process, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity marked by car manufacturers is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space ensures that the fuel in the tank can expand when the temperature rises without overflowing the tank's safety space. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. If the car owner wants to know the remaining fuel level in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it indicates that the fuel is running low, and when it is near F, it means the fuel level is sufficient.
2
2
Share

What Do Car Power and Torque Mean?

Car power and torque represent the speed and climbing ability of a vehicle, respectively. Power is a physical quantity that measures the maximum speed of a car, while torque measures the acceleration capability. A higher power results in a greater top speed, and higher torque leads to better acceleration performance. Below is an introduction to car power and torque: 1. Car power refers to the work done by the car per unit of time. Power is the work done by an object per unit of time. The greater the power, the higher the torque, and the stronger the pulling force of the car. Maximum power is commonly used to describe the dynamic performance of a car. 2. Car torque is the moment output by the engine from the crankshaft end. The higher the torque of a car, the better its response to operation. Compared to similar engine sedans, a higher torque output means greater load capacity, better acceleration performance, stronger climbing ability, fewer gear shifts, and relatively reduced wear on the car. Especially during zero-speed starts, cars with higher torque demonstrate the advantage of faster speed increase.
9
3
Share

How Does the Car Power Window Mechanism Work?

Car power window regulators consist of a basic manual window regulator, a reversible DC motor, and a gear reducer. The working principle involves activating the motor, which then drives the gear reducer to output power. This power is transmitted through the primary and secondary arms or by pulling a steel cable to move the glass mounting bracket, thereby forcing the door window glass to move in a straight line either upward or downward. Below are the functional features of car power window regulators: (1) Adjusting the opening degree of car door windows; hence, the window regulator is also known as a window adjuster or window winding mechanism. (2) Ensuring smooth operation of door window movement, allowing windows to be opened and closed smoothly at any time. (3) When the regulator is not in operation, the glass can remain stationary at any desired position.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.