What are the reasons for the Kia K2 air conditioning not cooling?

2 Answers
DeKimberly
07/29/25 12:28pm
Kia K2 air conditioning not cooling reasons are as follows: Refrigerant quality and purity: The quality and purity of the refrigerant play a crucial role in the vehicle's air conditioning system. Typically, inferior quality refrigerant can lead to inefficient operation of the air conditioning. Condenser and radiator: The heat dissipation condition of the condenser and radiator also affects the performance of the air conditioning. Not cleaning them for a long time can result in the condenser and radiator being covered by debris and dust. Long-term lack of cleaning and maintenance: If the air conditioning is not cleaned for a long time, the air filter can become clogged, affecting the discharge of cold air, leading to the air conditioning not cooling properly. Expansion valve quality: The expansion valve is an important component in the refrigeration system, usually installed between the liquid storage tank and the evaporator. Inferior quality expansion valves can prevent the refrigerant from functioning as it should.
Was this review help?
10
0
Share
DiBrooke
08/13/25 11:48pm
My Kia K2 experienced air conditioning failure last summer, and it took a long time to fix. The most common cause is refrigerant leakage—check for cracks in pipe joints or the condenser. Compressor issues are also frequent; if there's no strange noise when starting up, the clutch might be faulty. A clogged filter can reduce airflow, so regular replacement is crucial. Fan malfunctions or electrical problems like blown fuses or failed relays can also shut the system down. Back then, I had a friend help test the pressure, and we found it was too low. After refilling the refrigerant, it worked again. I recommend a comprehensive check before summer starts—don’t wait until the last minute like I did. The Kia K2 is generally durable, but its AC components age quickly, so timely maintenance is key to avoiding discomfort in hot weather.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

How to play songs with a USB drive in Jetour X70?

Method to play songs with a USB drive in Jetour X70: Insert the USB drive into the car's USB interface, then open the multimedia player and select USB playback. USB supports four basic data transfer modes: control transfer, isochronous transfer, interrupt transfer, and bulk transfer. The Jetour X70 is positioned as a mid-size SUV model, with dimensions of 4720mm in length, 1900mm in width, and 1695mm in height, and a wheelbase of 2745mm. The Jetour X70 is equipped with a 1.5T turbocharged engine, delivering a maximum output power of 108kW, a maximum power speed of 5500 rpm, and a peak torque of 210Nm.
8
0
Share

What is the 0-100 km/h acceleration time of the Leiling?

The 0-100 km/h acceleration time of the Leiling is 12.97 seconds, while the hybrid version takes approximately 12.8 seconds. The Leiling is a compact sedan under Toyota, with dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. It is equipped with a 1.2-liter turbocharged engine that delivers a maximum power of 116 kW and a maximum torque of 185 Nm. The engine reaches its maximum power at 5200 to 5600 rpm and its maximum torque at 1500 to 4000 rpm. The Leiling also features VVT-iW technology and uses an aluminum alloy cylinder head and block.
14
4
Share

What is the Volkswagen Phideon?

Volkswagen Phideon is the Volkswagen Phideon, a mid-to-large-sized sedan. It comes standard with LED daytime running lights across the lineup, featuring an integrated front grille and LED headlights that enhance the car's cohesive design. The side waistline extends seamlessly along the entire body. In terms of dimensions, the Volkswagen Phideon measures 5074mm in length, 1893mm in width, and 1489mm in height, with a wheelbase of 3009mm. It is equipped with two engine options, the EA888 and EA837, delivering a maximum horsepower of 300 HP and a peak torque of 440 Nm, with a maximum driving range of up to 850km.
12
2
Share

What is the method for testing with a cylinder pressure gauge?

Cylinder pressure gauge testing method: 1. First, use compressed air to clean the dirt around the spark plugs; 2. Remove all spark plugs. For gasoline engines, also disconnect the secondary high-voltage wires of the ignition system and securely ground them to prevent electric shock or fire; 3. Insert the conical rubber tip of the dedicated cylinder pressure gauge into the spark plug hole of the cylinder being measured, ensuring it is properly aligned and tightly secured; 4. Fully open the throttle and use the starter to rotate the crankshaft for 3 to 5 seconds (no fewer than 4 compression strokes). Stop rotating once the pressure gauge needle indicates and maintains the maximum pressure reading; 5. Remove the pressure gauge, record the reading, and press the one-way valve to reset the gauge needle to zero. Repeat this process for each cylinder, ensuring each cylinder is tested at least twice. Take the arithmetic mean of the measurements for each cylinder, compare it with the standard value, analyze the results, and determine the working condition of the cylinder.
6
1
Share

How to Reset the Sunroof on a BMW 5 Series?

Method to reset the sunroof on a BMW 5 Series: Raise the sunroof to the top and continue holding the switch for about 25 seconds. The sunroof will then operate automatically; keep holding until it stops by itself, indicating a successful initialization. The BMW 5 Series sunroof changes the traditional ventilation method, allowing wind to flow in and create an air current that draws out stale air from the cabin. The BMW 5 Series has dimensions of 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. It is equipped with a 2.0T high-power engine, delivering a maximum power of 250kw, maximum horsepower of 340ps, and maximum torque of 450nm, paired with an 8-speed automatic transmission.
2
0
Share

What Documents Are Required for the 6-Year Exemption Vehicle Inspection?

6-year exemption vehicle inspection requires: vehicle license (original and copy), ID card of the vehicle owner, compulsory traffic insurance policy, vehicle and vessel tax payment or tax exemption certificate, to be submitted to the local vehicle management office for application. If entrusting someone else to handle it, the original ID card of the agent and a written authorization signed by the vehicle owner are also required. The vehicle owner should ensure that there are no traffic violation records for their vehicle, which can be checked online or offline for any violations and dealt with promptly. On-site processing procedure: the vehicle owner directly brings the relevant documents (or the agent), may need to queue, but the application can be made on the spot, which is relatively simple.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.