What are the reasons for the intermittent display of the car navigation screen?

1 Answers
LaKylie
07/29/25 11:18am
The reasons for the intermittent display of the car navigation screen are: 1. Poor contact or aging of the power signal cable; 2. Faulty power supply module due to prolonged screen usage; 3. Defective circuit design requiring inspection, repair, or replacement at a repair shop. Methods to remove scratches from the car screen include: 1. Gently rub along the direction of the scratch with a soft pencil eraser until the scratch disappears; 2. Mix household white vinegar and distilled water in a 1:1 ratio, fold a soft cotton cloth, dip it into the vinegar solution, and gently wipe along the direction of the scratch.
Was this review help?
8
0
Share
More Forum Discussions

Do Automatic Transmission Cars Need a Break-in Period?

Automatic transmission cars do require a break-in period. Here is a related introduction to the break-in methods for automatic transmission cars: 1. During the initial few hundred kilometers, maintain a slow speed, keeping the speed below 60 km/h and the engine RPM under 2,200. 2. From 500 to 1,000 kilometers, which is the mid-break-in period, keep the RPM below 2,500. From 1,000 to 1,500 kilometers, the late break-in period, the speed can be increased to below 120 km/h, but the RPM should not exceed 3,000. 3. Avoid sudden braking or rapid acceleration during the break-in period. 4. During the break-in period, utilize all gears from low to high, cycling through them in sequence.
7
0
Share

What is the reason for successful Bluetooth pairing but no sound in Passat?

Passat Bluetooth pairing is successful but there is no sound for the following reasons: 1. Check if the phone volume is turned off: Please turn on the phone volume, then check if the car navigation system's volume is turned on, and also verify if the phone is connected to Bluetooth. 2. If the above is not the issue: This is because some car Bluetooth connections, if the car is not on the Bluetooth media audio playback interface, will still play the last media audio source, resulting in no sound when playing music. 3. It is recommended to switch the car to the Bluetooth media audio interface before connecting the phone's Bluetooth: If only the music has no sound, it cannot be ruled out that there is a problem with a specific application version. It is recommended to update all applications to the latest version or try using other applications for comparison.
2
1
Share

What is the method for quickly removing ice and snow from a car?

Methods for quickly removing ice and snow from a car: 1. Turn on the car heater to allow the snow on the windshield to melt slowly. Do not try to break it off by force or pour hot water on it; 2. When there is a significant amount of snow or ice on the front windshield in winter, do not immediately use the wipers to remove the snow. If there is ice, residues can be cleared with an ice scraper or plastic scraper; 3. Only after the snow is mostly removed and the ice on the windshield has melted should the driver normally use the wipers. When using tools to remove ice and snow, try to move in the same direction and avoid scraping back and forth to prevent hard residues from scratching the glass. Sometimes, the wipers may also freeze. After parking, place a newspaper or a cloth under the wipers to make it easier to clean the next day.
18
0
Share

What to Do If You Lose a Car Key?

If you lose a car key, the solution is: You can provide the vehicle registration certificate and identity information to a 4S dealership. The 4S dealership can then retrieve the vehicle's anti-theft password based on the provided information and configure a new key. At the same time, the data of the lost key can be erased. Although the lost key will no longer be able to start the vehicle, it can still unlock the doors. Therefore, the 4S dealership may also recommend replacing all the locks in the vehicle to ensure security. Nowadays, cars are typically supplied with one primary key and one spare key for the owner. If the primary key is lost, there is still a significant risk because the location where the key was lost is uncertain. If it was lost near a frequently parked location, since the remote control is with the primary key, it is possible for someone else to identify which car it belongs to by trial and error.
18
4
Share

What is the top speed of a mountain bike?

Speed descending world record is 170+ KM/H. Here are the specific details about mountain bikes: Overview: Mountain bikes originated in 1977 when Scott, a student at the University of California, USA, modified an ordinary bicycle. They were derived from bicycles used for stunt competitions on motocross tracks and later developed into a popular sport in Europe and America. Hardware requirements: The total length of the bicycle should not exceed 185 cm, the width should not exceed 50 cm, and the weight should not be less than 6.8 kg. The saddle length should be between 24-30 cm, and the distance from the bottom bracket to the ground should be between 24-30 cm. The front and rear wheels must have the same diameter, with a maximum diameter of 70 cm and a minimum of 55 cm. The bicycle must have a fixed gear and should not be equipped with any shifting devices or brakes.
17
4
Share

Should You Release the Handbrake or Shift Gears First in an Automatic Transmission?

Generally, you should shift gears first and then release the handbrake. Here is an introduction to starting an automatic transmission car: 1. Starting in P gear: When starting in P gear, there may be a slight impact force on the parking gear. When shifting from P gear to D gear after ignition, the transmission passes through R gear, which causes a small amount of backlash force and slight damage to the transmission. 2. Recommended shifting method: First, power on, press the brake and shift to N gear, ignite, then shift to D gear to start. As long as you do not stay in R gear, the transmission will not perform a gear shift. 3. Shifting logic: Modern automatic transmissions do not rely on the gear lever to directly drive the gear shift but on the transmission control system. After receiving the gear signal, the transmission control system calculates and then makes the shifting decision.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.