What are the reasons for the insensitivity of Volkswagen's keyless entry?

1 Answers
JoyFitz
07/29/25 8:14pm
Volkswagen's keyless entry may be insensitive due to a possible malfunction in the circuit board of the smart key, causing the sensing system to have no feedback. If the issue cannot be resolved immediately, you can first use the backup function on the smart key to open the door and use the vehicle, and then proceed to a 4S store for inspection and repair. Presence of electromagnetic interference nearby: Signal interference sources, such as near cameras, telecommunication towers, high-voltage power lines, etc., can generate such interference signals, which may prevent the car from detecting the key. Smart key in a low battery state: This can also cause the starting system to fail to detect the weak radio waves emitted by the key. In this case, even when the key is inside the car, the dashboard may still display 'key matching error.'
Was this review help?
7
3
Share
More Forum Discussions

What are the reasons for the air conditioner not blowing hot air?

The reasons why the air conditioner does not blow hot air are as follows: 1. Problem with the indoor unit: The filter screen at the air inlet is not clean enough. The solution is to remove and clean the filter screen at the air inlet of the indoor unit. 2. Problem with the outdoor unit compressor: Lack of Freon or leakage of Freon. The solution is to repair the Freon leakage in the outdoor unit compressor. 3. Problem with the outdoor unit: There is dirt on the aluminum fins, which reduces the heating effect. The solution is to wipe off the dirt on the aluminum fins of the outdoor unit. 4. Problem with the indoor unit: Blockage in the evaporation area. The solution is to clear the blockage in the evaporation area of the indoor unit.
1
4
Share

What Does a Car's Assisted Range of 100 Kilometers Mean?

Car's assisted range of 100 kilometers means that the vehicle can continuously travel 100 kilometers in assisted mode. Here is a detailed introduction about car's assisted range: 1. Overview: The car's range currently refers to the maximum distance that can be traveled with the remaining gasoline in the tank at a relatively economical speed. The estimate provided by the car's instrument is based on certain standards and calculations, derived from experience, and may not be very accurate. 2. Others: The battery in new energy vehicles is the key to the entire power system, providing electricity for the entire new energy system. However, limited by materials and technology, the range provided by the battery is limited. For hybrid vehicles, the maximum range supported by the battery is relatively short.
10
3
Share

How long after locking the car will the USB power be cut off?

Locking the car for about five minutes will cut off the USB power. Here is the relevant introduction: Lock button: After leaving the vehicle, you need to press the lock button on the remote key to lock the car. If the vehicle is equipped with a keyless entry system, there is usually a small button on the door handle. With the smart key nearby, pressing the button will complete the locking action. USB power off: If the car is parked for too long and the dash cam is not connected to power, this will drain the internal battery of the dash cam and display insufficient power. In this case, after the vehicle is started, the dash cam will charge, and after a while, the USB can be used normally.
11
4
Share

How to Replace the Low Beam Bulb of Roewe 350

Steps to replace the low beam bulb of Roewe 350: 1. Open the front hood and locate the bulb assembly. 2. Firmly pull out the blue-coiled bulb power cord (the blue ring indicates the socket). Apply moderate force to remove the socket completely, exposing the bulb base. The metal handle within the red circle is the clamp release lever. 3. First extract the socket, then press and slide the metal clamp handle rightward to loosen and remove the bulb. 4. Unbox the new bulb wearing gloves (fingerprints cause uneven heating and reduce lifespan). 5. Insert the new bulb, secure the clamp, and reconnect the power cord to complete installation.
11
0
Share

Why is the idle speed of an EFI motorcycle unstable?

Throttle body carbon deposits and air passage blockage are the main causes. Additional details are as follows: Overview: Unstable idle speed in EFI motorcycles mainly manifests as fluctuating idle speed (either too high or stalling directly), often accompanied by idle vibration. Unstable idle speed is one of the most common faults in motorcycles. Normally, the engine idle speed is fixed, with specific RPM values depending on the model's calibration—most models maintain around 1400 to 1500 RPM. Excessively high idle speed increases fuel consumption, while excessively low idle speed may cause stalling. Others: Carbon buildup in the throttle body affects its opening degree and air intake volume, resulting in unstable engine RPM (fluctuating between high and low) after cold starts, accompanied by vibration. If the throttle body is excessively dirty, cleaning is required—generally, this resolves the unstable idle speed issue.
15
2
Share

Is Vehicle File Transfer Required for Ownership Transfer?

Vehicle file transfer is required during ownership transfer. The following points outline key considerations for vehicle ownership transfer: 1. Necessity: Completing used car ownership transfer legally finalizes the change of vehicle ownership, ensures the legitimacy of the vehicle's origin (e.g., avoiding purchasing smuggled or stolen vehicles), and clarifies the division of responsibilities between buyer and seller regarding the vehicle (such as debt disputes or traffic violations), thereby protecting the legitimate rights of both parties. 2. Requirements: The vehicle must have legal origin and complete documentation, no outstanding bank liens or court seizure records, no unresolved traffic violations or accident records, no unpaid fees, and all required certificates must be available.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.