What are the reasons for the Honda Avancier's reverse radar not making sound?

1 Answers
ElijahLynn
07/25/25 1:26am
Introduction to the reasons why the Honda Avancier's reverse radar does not make sound: Check whether the reverse radar wiring at the rear bumper is properly connected; See if the reverse light turns on when shifting to reverse gear. If not, check the reverse light switch; Remove the right lining panel of the trunk and test the continuity of the wires to the radar; Open the fuse box and use a multimeter to check the continuity of the fuses related to the reverse radar; The reverse radar module or buzzer is damaged and needs to be replaced. Apart from malfunctions, the reverse radar will not respond in the following situations: Obstacles that are too low: Generally, obstacles that are 10~15cm below the center of the probe may be ignored by the probe. Moreover, the closer the obstacle is to the parking space, the lower this height value becomes, and the greater the danger. Obstacles that are too thin:
Was this review help?
20
5
Share
More Forum Discussions

Can You Buy Display Cars from 4S Stores?

Display cars from 4S stores are available for purchase. Below is relevant information about 4S stores: Introduction: A 4S store, officially known as an automobile sales service 4S store, is a car dealership that integrates four key functions: vehicle sales, spare parts, after-sales service, and information feedback. Services: The core competitiveness of 4S stores lies in winning customers through high-quality services. At these stores, consumers can access all value-added services including vehicle information, market trends, after-sales support, maintenance guidelines, and genuine parts supply. Both complete vehicles and components are guaranteed to be original manufacturer products, eliminating consumer concerns about after-sales service, repairs, and maintenance.
11
0
Share

Can I Get 50 Yuan Worth of Gas at a Gas Station?

You can get 50 yuan worth of gas at a gas station. For small cars or even large trucks, the fuel tank can typically hold several hundred yuan worth of fuel. Gas stations do not impose a minimum spending requirement, meaning there is no regulation on the minimum amount you must purchase. Additional relevant information is as follows: Gasoline Grades: When refueling, it's important not only to choose a reputable gas station but also to select the appropriate gasoline grade. Using an unsuitable grade can lead to increased fuel consumption and reduced engine performance. Gasoline Types: Some vehicles require 92-octane gasoline, while others need 95-octane or 98-octane. The primary difference between these grades lies in their octane ratings, with minimal variations otherwise. Higher-octane gasoline has better anti-knock properties.
1
0
Share

What are the differences between the new and old models of the Liexing?

The differences between the new and old models of the Liexing mainly lie in the configuration and appearance. Configuration: The 2020 Liexing 125 retains the original configuration while incorporating a more advanced and practical keyless ignition system. This system can be considered a high-tech feature for current high-end scooters, enabling truly keyless driving and enhancing anti-theft performance. Appearance: The 2020 Liexing 125 has adjusted the graphics and enriched the color schemes, making the vehicle look more youthful and sportier compared to the older models.
5
5
Share

Why Does the Fuel Nozzle Keep Tripping?

Fuel nozzles frequently tripping during refueling is generally caused by high air pressure, excessive fueling speed, or convoluted fuel pipe structure. High air pressure: Hot weather leads to increased air pressure inside the fuel tank, making fuel prone to splashing out during refueling, which triggers the automatic tripping of the fuel nozzle. Excessive fueling speed: Relatively fast fueling speed causes fuel splashing, leading to nozzle tripping. When the fuel level reaches the pipe opening, the fueling breather circuit gets blocked by fuel, causing fuel to accumulate in the fueling pipe. Convoluted fuel pipe structure: Overly twisted fuel pipe structures in the fuel tank can easily cause fuel spray and nozzle tripping. Welding issues after blow-molding of fueling pipes - while blow-molded products generally have good stability, welding often results in material overflow or misalignment, leading to narrow fuel flow channels.
3
4
Share

What Causes the Area Below the Car Steering Wheel to Heat Up?

The reasons for the area below the car steering wheel heating up are as follows: Dust cover detachment: It is necessary to check whether the dust cover of the steering cross shaft has come off or is damaged, causing engine heat to escape to the area below the steering wheel. High water temperature: Check if the water temperature is too high. Air conditioning system: The external circulation mode being turned on may allow hot air from the engine compartment to enter the car. It is recommended to switch the circulation mode to the internal circulation setting. Insulation cotton detachment: Hot air blowing due to the detachment of insulation cotton near the car's heater core. If the water temperature is normal, it is advised to visit an auto accessory shop to choose car insulation cotton and consider applying a layer of car insulation film.
9
3
Share

Why is the newly replaced controller very noisy?

The reasons for the newly replaced controller being very noisy are as follows: Controller mismatch: The controller does not match well. Different controllers: The original was a sine wave controller (characterized by quiet operation), while the replacement is a square wave controller, which has particularly noticeable noise during startup. Different connection sequence: If the connection sequence between the controller and the motor is incorrect, it can cause issues such as no rotation, reverse rotation, lack of power at high speed, shaking, or forward rotation. Proper phase matching (adjusting the connection wire positions) is required. Additional considerations are as follows: Off-brand controllers: These not only consume more power but also exhibit significant power deficiencies. Generally, off-brand controllers are from unknown brands and appear poorly made in terms of craftsmanship. Refurbished controllers: Due to severe aging, even after refurbishment, these controllers typically have a shorter lifespan and are more prone to malfunctions, which can degrade the overall performance of the electric vehicle.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.