What are the reasons for the high water temperature in Wuling Rongguang?

1 Answers
VonKaleb
07/29/25 11:27pm
Wuling Rongguang's high water temperature is caused by not replacing the antifreeze for a long time, or the radiator surface being too dirty. If this happens, it is recommended to clean the dirt on the radiator surface and replace the antifreeze. Cars use water-cooled engines, which rely on the continuous circulation of antifreeze within the engine for cooling. The new Wuling Rongguang has body dimensions of 4490mm in length, 1615mm in width, and 1915mm in height, with a wheelbase of 3050mm, offering a cargo space of up to 5100L and an effective loading space of 5100L.
Was this review help?
2
3
Share
More Forum Discussions

What Causes the Clunking Sound in the Rear Axle of a Truck

Truck rear axle making a clunking sound may be caused by the following reasons: 1. Improper clearance between the differential side gear journal and the differential housing. 2. Improper fit between the differential cross shaft journal and the differential housing. 3. Improper side clearance between the axle spline gear and the differential side gear keyway. 4. Improper meshing backlash between the differential side gear and the planetary gear. 5. Improper meshing backlash between the differential drive and driven bevel gears. 6. Worn thrust washers. During vehicle operation, abnormal noise from the rear axle is caused by improper gear meshing clearance, improper preload adjustment of the differential bearings, or both. To eliminate the noise, it is necessary to disassemble and inspect the meshing clearance of the differential gears and the final drive gears, the preload of the final drive pinion bearings, and the contact pattern of the final drive gears.
18
2
Share

Can You Still Drive When the SVS Light Is On?

You should not drive when the SVS light is on. If the SVS light is illuminated, you can attempt to start the engine. If the engine fails to start, it could indicate an issue with the fuel pump, preventing proper fuel supply to the engine. If the engine starts, the problem might be related to other sensor malfunctions. In such cases, the vehicle may still be drivable, but the fault could affect normal operation. Possible causes for the SVS light being on: 1. The SVS light is similar to the engine fault light; when illuminated, it indicates the engine control unit has detected an incorrect signal or a sensor exceeding usage standards. 2. The SVS fault indicator is a warning light triggered by the ECU (Engine Control Unit) or TCU (Transmission Control Unit) when issues are detected in the engine or automatic transmission. All fuel-injected vehicles have an SVS light—for manual transmissions, it serves as the engine fault indicator, while for automatic transmissions, it indicates both engine and transmission faults.
6
2
Share

What are the qualifications and conditions for applying to be a DiDi driver?

To apply as a DiDi driver, the vehicle owned by the applicant must be less than six years old, with a base price of over 70,000 yuan, and a mileage under 100,000 kilometers. Male applicants must be aged between 22 and 60, while female applicants must be between 22 and 50. Below is an introduction to DiDi: 1. Introduction: DiDi Chuxing has transformed traditional taxi-hailing methods, establishing a modern mobility approach that leads the user experience in the mobile internet era. 2. Development: On August 5, 2019, DiDi Chuxing announced the upgrade of its autonomous driving division into an independent company, focusing on autonomous driving R&D, product applications, and business expansion. 3. Features: No need to make a phone call—simply open the app to see nearby taxis, your location, and request a ride to your destination.
3
2
Share

Can a New Car Handle Long-Distance Trips?

New cars can handle long-distance trips as long as you ensure the engine speed does not exceed 3000 RPM. Long-distance travel may involve various road conditions, and although speed limits differ on highways, national roads, and provincial roads, the maximum speed for a new car during the break-in period can be maintained at around 100 km/h. It is acceptable for a new car to undertake long-distance trips. Before setting off on a long journey, it is advisable to warm up the car. After prolonged parking, the engine oil flows back to the oil pan at the bottom of the engine, leaving the upper part of the engine without lubrication. It takes approximately 30 seconds after starting the engine for the oil pump to circulate the oil to critical components such as the pistons, connecting rods, and crankshaft. Even if you start driving immediately after starting the engine, as long as you avoid aggressive acceleration and maintain low RPMs, the car can still warm up effectively.
6
1
Share

Which manufacturer produces Jetour?

Jetour is a sub-brand of Chery Automobile, and its production base is located at Chery's intelligent manufacturing facility in Kaifeng, Henan. Below are the detailed introductions: Introduction: Jetour is a sub-brand of Chery Automobile, launched in Beijing on January 22, 2018. Jetour primarily manufactures SUV models, including the X70, X70S, and X90. X70 Model Specifications: This model is equipped with a 1.5L turbocharged engine, and the automatic transmission version features an 8-speed automatic gearbox. The X70 offers spacious interiors, though its fuel consumption is slightly higher. The manual transmission variant consumes 8.0L per 100km, while the automatic version consumes 9.0L per 100km.
14
4
Share

What does AC stand for in a car?

AC in a car refers to the compressor switch of the car's air conditioning system, which is essentially the cooling switch. The methods for maintaining a car's air conditioning system are as follows: 1. Conduct a comprehensive inspection of the air conditioning system. 2. Regularly replace the air conditioning filter. 3. Periodically change the air conditioning grid. 4. Use high-pressure methods to remove dust and hair debris accumulated on the evaporator. Relevant information is as follows: 1. The AC switch needs to be turned on when using the air conditioning for cooling in summer. A car's air conditioning system consists not only of a compressor but also includes components such as a condenser, evaporator, and expansion valve. However, the compressor is one of the crucial components of the refrigeration system, responsible for compressing and transporting refrigerant vapor. 2. The car's air conditioning system is designed to cool, heat, ventilate, and purify the air inside the vehicle. AC in a car is the compressor switch of the air conditioning system, serving as the cooling switch.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.