What are the reasons for the high water temperature fault in Dongfeng Lingzhi?

What are the penalty standards for making a U-turn in Subject 3?

Failing to correctly observe traffic conditions and choose the appropriate time for a U-turn will result in disqualification; selecting an inappropriate location for a U-turn will result in disqualification; failing to signal before making a U-turn will result in disqualification; if the U-turn obstructs the normal passage of other vehicles or pedestrians, 10 points will be deducted. Below are the precautions for making a U-turn in Subject 3: 1. Note 1: During the Subject 3 test, a U-turn must be performed in first gear. Apply the brake to slow down, and when the speed is sufficiently reduced, press the clutch to shift to a lower gear. 2. Note 2: When the vehicle is traveling in the middle lane, a U-turn must be made at the upcoming intersection, which requires changing lanes. To avoid obstructing left-turning vehicles, the U-turn should be made from the leftmost lane.

11

0

Share

What is the method for shifting gears in a motor vehicle?

The method for shifting gears in a motor vehicle is as follows: when shifting, keep your five fingers together, lightly grasp the gear knob, and use your forearm to guide your hand in shifting. When shifting up, use the lower part of your palm to engage the gear, and when shifting down, use the four fingers of your right hand (excluding the thumb) to disengage the gear. Apply gentle and slow force when shifting, avoiding excessive force to prevent jumping to another gear. Precautions for shifting gears: When shifting, first press the clutch pedal all the way down before touching the gear lever. First disengage the gear and return to neutral, then move to the desired gear position. Pause briefly in front of the corresponding gear position before applying slight force to engage the gear. When accelerating and shifting, use the "double-clutch method." For upshifting, follow the principle of "press (clutch), shift (neutral), press (clutch), shift (higher gear)," quickly pressing the clutch pedal twice. When decelerating and shifting, release the accelerator, lightly press the brake, and monitor the speedometer. When the speed reaches the lower gear range, maintain light pressure on the brake, press the clutch, and shift gears. After shifting, simultaneously release the clutch and brake. Additionally, when shifting, pay attention to timing—correct, smooth, and agile operation is essential. Avoid rushing the process. During driving, unless under special circumstances, do not skip gears when upshifting.

14

4

Share

Within how many meters should a roadside parking be completed?

After the examiner issues the instruction to park by the roadside, the parking should be completed within 80 meters. When temporarily parking on the right side, the driver must not leave the vehicle immediately and should quickly drive away if obstructing traffic. Parking is not allowed at intersections, railway crossings, curves, narrow roads, narrow bridges, steep slopes, tunnels, or within 20 meters of these locations. Additionally, parking is prohibited in sections with pedestrian guardrails (hedges), crosswalks, construction areas, or opposite obstacles. The steps for roadside parking are as follows: Upon hearing the instruction to "park by the roadside," first determine the parking position, then turn on the right turn signal and steer the wheel 90 degrees to the right. When the middle of the front of the car aligns with the roadside, quickly turn the steering wheel more than 180 degrees to the left. When one-third of the front of the car aligns with the roadside, straighten the steering wheel. If the car deviates, always keep one-third of the front aligned with the roadside and make slight adjustments. When the car body is parallel to the roadside, park at a distance of 10 to 30 centimeters from the roadside.

9

0

Share

How to Turn Off the Continuously Flashing Turn Signals?

There is a turn signal switch located below the steering wheel. Pushing it downward activates the left turn signal, upward activates the right turn signal, and the middle position turns it off. More related information is as follows: 1. Turn signals are the most critical devices representing a car's dynamic information: Installed at the front and rear of the vehicle, they are activated when the car turns, providing safety assurance. For safety, please use turn signals as required to allow others to anticipate the car's movement and make accurate judgments. 2. Types of turn signals: Turn signals use flashers to achieve light blinking, mainly categorized into resistance wire type, capacitor type, and electronic type. 3. Added 'one-touch three-flash' quick function: With the development of automobiles, many cars now have a 'one-touch three-flash' quick function added to their hazard light switches.

10

0

Share

What are the requirements for renewing a C1 driver's license?

C1 driver's license renewal new regulations: Applications can be made within 90 days before the expiration date. The following is the relevant introduction for renewal: 1. Location and time of processing: Processing location: Vehicle Management Office of the traffic management department of the public security organ where the driver's license was issued. Processing time: Weekdays 9:00—17:00. 2. Required materials: Motor vehicle driver's license application form, applicant's resident ID card, applicant's original motor vehicle driver's license, motor vehicle driver's physical condition certificate, 3 recent small one-inch bareheaded photos with white background. 3. Processing fee: 10 yuan/certificate.

4

2

Share

How to Deal with Moldy Car Seats?

Use a specialized strong leather cleaner to remove as much mold as possible from the surface of the leather, as mold is typically a type of bacteria that can reproduce. Cleaning only removes the mold on the surface, while the mold inside the leather is not killed. The steps to handle moldy car seats are as follows: 1. Wipe with a soft, dry sponge or cloth: Dust on leather sofas can be wiped away with a soft, dry sponge or cloth. For suede leather surfaces, use a specialized suede cleaning cloth to remove dust. 2. Regularly use a specialized leather sofa maintenance cream to clean handbags: This can keep the leather shiny and moisturized. Regular use of a specialized leather sofa maintenance cream for handbags can also provide dustproof, oilproof, and waterproof protection. However, for suede leather, there is a specialized suede protector that can be sprayed on the leather surface. Once dried, it can make the leather oilproof, dustproof, and waterproof. 3. Store in a ventilated area: Keep the sofa dry frequently. 4. Place in a cool area: If leather products get wet, use a dry cloth to absorb the moisture. Let it dry naturally. Never place a wet sofa directly under the sun to dry or use a hairdryer to blow-dry it. Also, avoid placing it near air conditioning vents, as this may cause the leather to crack.

10

4

Share

What are the reasons for the high water temperature fault in Dongfeng Lingzhi?

What are the penalty standards for making a U-turn in Subject 3?

What is the method for shifting gears in a motor vehicle?

Within how many meters should a roadside parking be completed?

How to Turn Off the Continuously Flashing Turn Signals?

What are the requirements for renewing a C1 driver's license?

How to Deal with Moldy Car Seats?

Can dishwashing detergent be used to wash a car?

What are the reasons why the fuel tank cover of the Sagitar cannot be opened?

Should You Engage the Handbrake or Shift to P First After Parking?

How Does the Airbag Deployment Work?