What are the reasons for the high fuel consumption of the Trumpchi GS4?

1 Answers
BriellaRose
07/30/25 10:32am
The reasons for the high fuel consumption of the Trumpchi GS4 are as follows: 1. Displacement: The engine displacement has a certain impact on the car's fuel consumption, but this impact is a fixed value. 2. Tire pressure: The car's fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. 3. Road conditions: The road conditions on which the car is driven will also affect fuel consumption. 4. Combined fuel consumption: This is calculated by dividing the total emissions from urban and suburban driving cycles by the total mileage completed in these cycles, and then using the emissions to determine the corresponding fuel consumption value.
Was this review help?
6
4
Share
More Forum Discussions

What is the process of changing car engine oil?

Process of changing car engine oil: 1. Remove the underbody guard to expose the oil filter and drain plug, unscrew the drain plug on the oil pan, position the oil collection tank beneath the vehicle to collect the old oil; 2. Use tools to remove the old oil filter by turning it counterclockwise, apply a layer of oil on the rubber gasket of the new oil filter, then install it back in place, tighten the drain plug without excessive force to avoid thread damage; 3. Apply a layer of oil on the rubber gasket of the new oil filter and reinstall it, when adding new oil through the filler port, refer to the vehicle manual for the correct amount.
17
2
Share

What is the name of the car with a logo similar to Chery?

The car with a logo similar to Chery is called Infiniti, which is a luxury brand under Nissan, born in the U.S. market, and has a full range of models including coupes, sedans, off-road vehicles, and SUVs. Taking the Infiniti QX50 as an example: the car is equipped with a 2.0T turbocharged engine, matched with a CVT continuously variable transmission. The body dimensions of the Infiniti QX50 are 4705 mm in length, 1903 mm in width, and 1681 mm in height, with a wheelbase of 2798 mm. The front suspension type of the Infiniti QX50 is a MacPherson independent suspension, and the rear suspension type is a multi-link independent suspension with a stabilizer bar, with a unibody structure.
2
4
Share

What engine does the Cadillac Escalade use?

Cadillac Escalade uses a 6.2-liter naturally aspirated engine with a maximum power of 313 kilowatts and a maximum torque of 621 Newton-meters. The engine reaches its peak power at 5,600 revolutions per minute and peak torque at 4,100 revolutions per minute. This engine is equipped with multi-point fuel injection technology and features an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission. The Escalade comes with a full-time four-wheel-drive system, a short/long arm front suspension, and a five-link independent rear suspension. As a luxury full-size SUV under the Cadillac brand, the Escalade boasts a very imposing appearance, excellent safety features, superior ride comfort, and a luxurious interior design.
10
3
Share

Where is the rearview mirror heating button on the Baojun 730?

The rearview mirror heating switch of the Baojun 730 is located near the mirror adjustment switch in front of the driver's door window control panel. Working principle of rearview mirror heating: The working principle of the electrically heated rearview mirror is very simple and not highly costly. It involves installing an electric heating element (heating film) inside the mirror lenses on both sides. During rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element quickly warms up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. This heats the mirror surface, effectively removing fog and frost, providing great convenience for the driver. Definition of rearview mirror heating: The rearview mirror heating function refers to the ability of the exterior rearview mirrors to be heated via electric heating wires embedded behind the mirror lenses when driving in rainy, snowy, or foggy conditions, ensuring clear visibility on the mirror surface.
18
3
Share

What are the differences between the 911 and the Panamera?

The differences between the 911 and the Panamera: 1. Different positioning: The 911 is a two-door sports car; the Panamera is a four-door mid-to-large-sized coupe. 2. Different body dimensions: The 911 measures 4499 mm, 1808 mm, and 1294 mm; the standard wheelbase version of the Panamera measures 5049 mm, 1937 mm, and 1428 mm, while the long wheelbase version measures 5199 mm, 1937 mm, and 1428 mm. 3. Different powertrains: The 911's available engines include a 3.0L turbocharged engine, a 4.0L naturally aspirated engine, and a 3.8L turbocharged engine; the Panamera's available engines include a 2.9L turbocharged engine, a 4.0L turbocharged engine, and a 3.0L turbocharged engine.
4
4
Share

What are the methods to remove formaldehyde from the car interior?

Methods to remove formaldehyde from the car interior: 1. Ventilation: For the first six months after purchasing a new car or after interior updates, develop the habit of driving with windows slightly open to maintain fresh air circulation and accelerate the dissipation of odors inside the car; 2. Activated carbon adsorption: Activated carbon has strong adsorption properties and is a common method for removing formaldehyde in daily life; 3. Air compressor solvent atomization: Use an air compressor to evenly spray formaldehyde-removing solvents in the car, ensuring the spray covers all interior components and corners; 4. If financially feasible, purchase some high-quality formaldehyde removal products available on the market. Car interior disinfectants are highly effective in removing formaldehyde. For faster odor elimination, you can also opt for negative ion deodorization services at car care centers, which yield noticeable results.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.