What are the reasons for the high fuel consumption of the Peugeot 307?

1 Answers
McLawson
07/30/25 5:43am
The reasons for the high fuel consumption of the Peugeot 307: 1. Engine carbon deposits: Excessive carbon deposits can lead to incomplete combustion of the air-fuel mixture, increasing fuel consumption. Therefore, it is necessary to regularly clean the engine carbon deposits, including: intake tract, throttle valve, fuel injector, and cylinder carbon deposits. Solution: Clean the carbon deposits in a timely manner. 2. Vehicle weight: Carrying excessively heavy items in the vehicle can increase fuel consumption by about 2% compared to normal driving. Solution: Reduce the weight of the vehicle. 3. Clogged air filter: A clogged air filter restricts air intake, causing an overly rich air-fuel mixture or a blocked exhaust pipe. Solution: Replace the air filter promptly. 4. Worn spark plugs: Worn spark plugs with excessive gap wear result in insufficient ignition, leading to incomplete combustion of the air-fuel mixture and increased fuel consumption. Solution: Replace the spark plugs in time. 5. Low cylinder pressure: Practice has shown that cylinder pressure below the specified value can increase fuel consumption by 20% to 25%. Solution: Conduct timely inspections of cylinder pressure.
Was this review help?
5
4
Share
More Forum Discussions

Why is the antifreeze level decreasing?

Reasons for decreasing antifreeze level: 1. Normal evaporation: Under the continuous high temperature of the engine, some antifreeze will inevitably evaporate, but the amount is usually minimal; 2. Faulty leakage: Damage to the radiator gasket or loosening of the overflow tank, water pump joint surface, and pipe connections in the cooling system can lead to antifreeze leakage; 3. Antifreeze entering the cylinder and participating in combustion, such as due to cylinder cracks, gasket erosion, or corrosion deformation. In such cases, check the oil dipstick for any emulsification. Antifreeze, also known as coolant, is designed to prevent freezing, ensuring the cooling system remains operational during cold winter temperatures without freezing.
5
2
Share

What is crugen tire?

crugen is a brand under the South Korean Kumho Tire company. As a high-performance urban off-road comfort tire, the Kumho CRUGEN features a longitudinal wave-like tread pattern design complemented by distinctive transverse capillary grooves. This semi-grooved design delivers notable noise reduction effects - during driving, the transverse capillary grooves filter out most rolling noise, providing excellent quiet comfort. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on surfaces, typically installed on metal rims. They support the vehicle body, cushion external impacts, maintain contact with the road surface, and ensure driving performance.
16
4
Share

How Often Should Car Window Tint Be Replaced?

Car window tint generally needs to be replaced every three years. Precautions for car window tinting: 1. After tinting, try to park the car in a sunny place to ensure sufficient evaporation of moisture under the film; 2. When stains are found on the tint, avoid using sharp or hard objects to scratch it, and do not use corrosive sprays to wipe it; 3. Avoid washing the car for a few days after tinting, as washing it prematurely may cause the film to peel off. Also, do not activate the rear window defroster for a week, as the heat generated can deform the tint. Car window tinting involves applying a thin film to the front and rear windshields, side windows, and sunroof. This film is also known as solar film or heat-insulating film. It helps reduce damage to interior items and passengers caused by UV rays, lowers the interior temperature through physical reflection, reduces the use of car air conditioning, thereby decreasing fuel consumption and saving costs.
12
0
Share

Where to Add Windshield Washer Fluid in the Encore?

Windshield washer fluid is added to the reservoir located at the bottom left corner of the engine compartment, which has a cap marked with a washer symbol. Here are some key points to note when adding windshield washer fluid to your car: Characteristics of your vehicle: Each car has different requirements for windshield washer fluid, such as concentration, molecular weight specifications, and the pressure it can provide. Only by understanding these factors can you make proper use of the washer fluid. These specifications should be based on your car's standards, usually detailed in the owner's manual, which may also include an introduction to the electrical circuits in the wiper system. Choosing windshield washer fluid: Depending on the car model, certain types of windshield washer fluid may be recommended for sale. This type of fluid can be added directly. If not available, you may need to purchase washer fluid and mix it in a certain proportion. When filling, remember not to overfill the reservoir—you can always add more if needed. Overfilling may cause issues. Additionally, try to use the same brand of washer fluid to minimize the risk of clogging the related pipes.
18
5
Share

Where to Obtain the Motor Vehicle Inspection Compliance Label?

Motor vehicle inspection compliance labels are processed at the vehicle management office or traffic police station. The motor vehicle inspection compliance label refers to the compliance label issued by the traffic management department after the vehicle passes the periodic safety technical inspection. National regulations require motor vehicles to undergo regular inspections. Only after passing tests for exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and having no traffic violation records, can the inspection compliance label be issued. Conditions for applying for the motor vehicle inspection compliance label: 1. Within three months before the expiration of the current inspection validity period; 2. Provide proof documents as required by laws, regulations, and departmental rules; 3. Any road traffic safety violations and accidents involving the motor vehicle must be resolved; 4. The motor vehicle must pass the safety technical inspection, except for vehicles exempt from inspection.
1
0
Share

Does Engine Oil Additive Really Work?

Engine oil additives have limited utility. The term "engine oil additive" is a general name for all oil additives, and it's best not to use them. The main components of such products are anti-wear additives, which are mostly sulfur-phosphorus based. Adding too much engine oil additive can increase anti-wear capability, but it also raises acidity, which can be corrosive to the engine. One of the functions of engine oil additives is to reduce oil consumption. They can indeed help alleviate oil burning issues. Oil burning is primarily caused by the reduced sealing effectiveness of the engine piston rings. Adding engine oil additive increases the viscosity of the oil, making it less likely to enter the combustion chamber, thereby reducing oil burning. For older vehicles with significant engine wear, these additives might be considered, but they should never be used in new cars.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.