What are the reasons for the high fuel consumption of the eighth-generation Civic?

What Causes Abnormal Noises When Driving on Bumpy Roads?

Causes of abnormal noises when driving on bumpy roads include: Shock absorber failure. When the shock absorber malfunctions, its damping performance decreases, causing collisions between the vehicle frame, leaf springs, and axles, which results in abnormal noises. A faulty shock absorber needs to be replaced directly. Common causes of shock absorber failure include the following three: 1. The rubber components of the shock absorber top mount and arm bushings age and harden, producing noise when squeezed. 2. Damper failure, causing the shock absorber to make abnormal noises. 3. The shock absorber leaks air or oil. The following methods can be used to check if the shock absorber is damaged: 1. Press down hard on the bumper and release; if the car bounces two to three times, the shock absorber is not damaged. 2. Drive on relatively flat roads at low speed; if the car experiences strong up-and-down vibrations, the shock absorber is faulty. 3. Drive ten kilometers on a flat road; the temperature of the shock absorber shell can indicate whether it is faulty.

8

2

Share

What is the minimum ground clearance of the Honda Avancier?

The minimum ground clearance of the Honda Avancier is 203 millimeters. The minimum ground clearance of the Honda Avancier refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance improves the Avancier's off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Honda Avancier is a mid-size SUV under GAC Honda, with a body structure of a 5-door, 5-seat SUV. The dimensions of the two-wheel-drive version of the Honda Avancier are 4858 mm in length, 1942 mm in width, and 1670 mm in height, with a wheelbase of 2820 mm. The four-wheel-drive version measures 4858 mm in length, 1942 mm in width, and 1675 mm in height, with the same wheelbase of 2820 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Honda Avancier is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Avancier's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance may be preferable to avoid scraping or damaging the chassis.

10

4

Share

Should an automatic transmission car be started in Neutral or Park?

Starting an automatic transmission car in Neutral (N) or Park (P) has the same effect, but starting in Park is safer from a safety perspective. Below is an analysis of whether to start an automatic transmission car in Neutral or Park: 1. First, the structural difference between Park (P) and Neutral (N) is only a locking gear. When the transmission is in Park, the locking gear engages the output shaft of the transmission, preventing it from rotating and enabling parking, without affecting the connection between the transmission and the engine. Whether in Park or Neutral, the load on the engine during startup remains unchanged, and the power transmission to the transmission is also the same, so the impact on the vehicle is identical. 2. Secondly, from a safety standpoint, starting in Park is safer. During startup, since various components of the vehicle, including the braking system, are not yet operational, shifting the transmission into Neutral at this time could lead to a rolling accident if the foot brake's stopping power is insufficient.

6

2

Share

How to Reset the Maintenance Light for Hyundai Elantra One-Key Start?

To reset the maintenance light for the Hyundai Elantra, follow these steps: 1. Turn the ignition switch to the On position. 2. Press and hold the RESET button for more than 5 seconds to activate the reset mode. 3. Press the RESET button again for more than 1 second to reset the maintenance light. A car is a complex piece of machinery, and during operation, mechanical components inevitably experience wear and tear, compounded by external factors such as human use and environmental conditions, leading to the degradation of car parts. Based on the vehicle's driving conditions, manufacturers establish corresponding maintenance schedules and set maintenance lights as reminders.

7

0

Share

How to set up the audio system in Changan CS75?

To set up the audio system in Changan CS75, you need to open the central control screen and find the sound settings, then directly adjust the equalizer. Below is the relevant introduction of Changan CS75: 1. Changan CS75 is a compact SUV, equipped with two engines, one is a 1.5-liter turbocharged engine, and the other is a 1.8-liter turbocharged engine. 2. The 1.5-liter turbocharged engine has a maximum power of 178 horsepower and a maximum torque of 265 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed is 1450 to 4500 rpm. This engine is equipped with direct injection technology and is matched with a 6-speed manual transmission or a 7-speed dual-clutch transmission. 3. The 1.8-liter turbocharged engine has a maximum power of 177 horsepower and a maximum torque of 245 Nm. This engine can output maximum power at 5000 to 5500 rpm and maximum torque at 2000 to 4500 rpm. This engine is equipped with multi-point fuel injection technology and is matched with a 6AT transmission.

18

1

Share

What Are the Types of Car Window Films?

Here are the types of car window films: 1. Traditional dyed film. Characteristics of dyed film: no metal coating, low visible light transmittance, poor heat insulation performance, prone to fading, and easy to bubble after long-term use. 2. Single-layer metal film. It achieves heat insulation by reflecting visible light. Its characteristics include: high reflectivity or mirror-like appearance, likely to cause light pollution, mostly made by single-layer metal spraying with uneven metal coating. Some materials are produced through evaporation treatment or sputtering spraying process, lacking spectral selectivity. 3. Heat-absorbing film. Poor thermal control performance. Its characteristics include: adding heat-absorbing chemicals to the adhesive, producing short-term heat insulation effect, generating secondary radiation after saturation, with far-infrared rays posing more serious harm to the human body, lacking spectral selectivity. Uneven heat absorption can easily cause glass breakage. 4. Heat-reflecting film. Produced using magnetron sputtering technology, featuring spectral selectivity. Its characteristics include: excellent heat insulation performance; made by multi-layer sputtering of precious metals, reflecting a large amount of heat; rarely produces secondary radiation phenomenon.

11

0

Share

What are the reasons for the high fuel consumption of the eighth-generation Civic?

What Causes Abnormal Noises When Driving on Bumpy Roads?

What is the minimum ground clearance of the Honda Avancier?

Should an automatic transmission car be started in Neutral or Park?

How to Reset the Maintenance Light for Hyundai Elantra One-Key Start?

How to set up the audio system in Changan CS75?

What Are the Types of Car Window Films?

How to Replace a Tubeless Tire Valve?

Can a Heavy Car Steering Wheel Be Adjusted?

Is it mandatory to purchase full coverage insurance for a new car?

What is an 8AT Transmission?