What are the reasons for the high fuel consumption of the Corolla 1.6?

2 Answers
StDaniela
07/23/25 8:35pm
The main reasons for the high fuel consumption of the Corolla 1.6 lie in daily maintenance, such as not replacing the air filter, fuel filter, engine oil and oil filter for a long time, abnormal tire pressure, or not replacing spark plugs according to the maintenance cycle. Maintaining good driving habits can also effectively reduce the problem of high fuel consumption. Notes: 1. Driving habits: Parking and idling consume a lot of fuel, so try to minimize idling time. Poor control of low-speed gear shifting will not save fuel. Driving in low gear for a long time will also increase fuel consumption, and frequent lane changes and curved driving will increase fuel consumption. Therefore, avoid driving at low speeds for too long, as engine failure can also cause abnormal fuel consumption. 2. Engine oil type: There are strict requirements for engine oil types, as the performance and technology of different engines determine which type of engine oil to use. Using the wrong type can lead to increased fuel consumption, abnormal wear, and other issues.
Was this review help?
3
4
Share
LenaLee
08/10/25 6:33pm
When I drove the Corolla 1.6, the sudden increase in fuel consumption was a headache, mainly caused by driving habits. On the road, I often accelerated sharply or braked suddenly, forcing the engine to work harder and consume more fuel; driving over 120 km/h on the highway increased wind resistance, which also wasted fuel; frequent stop-and-go traffic in the city led to prolonged engine idling, burning fuel inefficiently. There were also car condition issues, like underinflated tires increasing rolling resistance—I had to check tire pressure monthly; or a dirty air filter restricting airflow, which could be replaced every six months to save fuel. As for fuel quality, using low-grade gasoline to save money resulted in incomplete combustion, requiring more fuel; neglecting maintenance for long periods led to worn-out spark plugs causing poor ignition and higher fuel consumption. I recommend adopting a smooth driving style and performing regular simple checks, such as cleaning the throttle body, to reduce trips to the gas station each month.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

Why Does the Radiator Run Out of Water?

The reasons for water shortage in the radiator are as follows: 1. Leakage at the hose connection or the hose itself; replace the hose or reinforce the seal. 2. Cracks in the cylinder block or a loose/damaged cylinder head gasket, causing water leakage. 3. Damaged seals or sand holes in the oil cooler, leading to water leakage. 4. The radiator cap is not tightly sealed. 5. Leakage in the heater radiator. 6. Leakage in the three-way connector. Methods to determine a three-way connector leakage are as follows: 1. Check if the exhaust pipe emits white smoke; if so, it may indicate water burning due to cracks in the cylinder block or a loose/damaged cylinder head gasket. 2. Cracks in the cylinder block may cause air to bubble up in the radiator, but without boiling over. 3. A loose or damaged cylinder head gasket can result in insufficient engine power. 4. Start the engine and use an absorbent cloth or tissue to check for leaks at various connections. 5. Fill the radiator with water (without capping it), start the engine, and rev it to around 2000 RPM to see if bubbles emerge from the radiator, which may indicate a deformed cylinder head. 6. For damaged oil cooler seals or sand holes, check the engine oil for water droplets or emulsification as a diagnostic measure.
6
3
Share

Is It Okay to Drive a New Car on a Long Trip?

It is possible to drive a newly purchased car on a long highway trip, but you should pay attention to the speed and engine RPM. It is best not to exceed 100 km/h and keep the engine RPM below 3000. Avoid driving for extended periods and ensure the vehicle gets sufficient rest. Here are specific precautions for driving a new car on the highway: 1. Speed Control: Do not exceed 100 km/h on the highway, avoid sudden acceleration or deceleration, and gently apply the brakes and throttle. 2. Pre-Trip Inspection: Before the trip, it's advisable to have the car checked at a 4S dealership (usually free). Inspect tire pressure and check for any leaks of fluids or oil. 3. Avoid Overloading: Overloading a new car can damage its components. For the first 1000 km, domestic cars should not exceed 75%-80% of the rated load capacity, while imported cars should not exceed 90%. Additionally, choose smoother road surfaces to minimize excessive vibration, impact, or emergency braking, reducing stress on the body and powertrain. 4. Take Breaks: For trips longer than 2 hours, take breaks at service areas—both the driver and the car need rest. Prolonged engine operation increases the likelihood of accelerated component wear.
8
2
Share

How to Set Up the Rearview Camera?

Step on the car's brake pedal and press the one-touch start button to turn on the dashboard and power up the vehicle. Shift the car's gear lever to the R position to engage reverse gear. Check if the rearview camera image is misaligned. Adjust the camera angle if necessary.
2
5
Share

What is the method to clear the 0101 fault code on Dongfeng Dolika?

"The fault code 0101 on Dongfeng Dolika indicates a lack of urea in the vehicle. This code serves as a reminder for the driver to refill the urea. To resolve this, open the urea filler cap and pour in the urea solution. Fault resolution method: When the vehicle is low on urea solution, a warning light resembling a fuel tank with 'Adblue' will illuminate on the dashboard (usually yellow or blue). The urea tank is typically located on the left or right side of the vehicle frame. Unscrew the cap on top of the urea tank to refill it. If the vehicle is not consuming urea, it may be due to a clogged urea nozzle or a system malfunction. The digital dashboard will display corresponding fault codes. In such cases, it is recommended to visit a service station for inspection and repair. Function of urea solution: It reduces nitrogen oxide compounds in vehicle exhaust, lowering pollution levels and helping the vehicle meet national emission standards. The SCR system's intelligent control prevents the vehicle from starting when the urea solution level is insufficient. To ensure normal operation, always maintain an adequate supply of urea solution. Vehicle urea solution is essential for heavy-duty diesel vehicles to meet China's National IV emission standards. It consists of a 32.5% urea concentration in ultrapure water, made from urea crystals and ultrapure water."
7
2
Share

Is the parking distance 30 meters or 50 meters?

50m. Motor vehicles are not allowed to park at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, or within 50 meters of the above locations. Parking in these areas not only endangers the driver's property and personal safety but also poses risks to others' property and personal safety. When temporarily parking on the road, motor vehicles must comply with the following regulations: 1. Parking is prohibited in sections with no-parking signs or markings, sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, crosswalks, and construction zones. 2. Parking is prohibited at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, or within 50 meters of the above locations. 3. Parking is prohibited in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (including within 30 meters of these locations), except when using these facilities. 4. Doors must not be opened or passengers allowed to board or alight before the vehicle comes to a complete stop, and opening doors must not obstruct other vehicles or pedestrians. 5. When parking on the roadside, vehicles must stay close to the right side of the road, and the driver must not leave the vehicle. After passengers board or alight or goods are loaded or unloaded, the vehicle must depart immediately. 6. City buses are not allowed to stop to pick up or drop off passengers outside designated bus stops.
7
1
Share

What is the correct procedure to start a manual transmission car?

Press the clutch pedal, shift the manual transmission to neutral (N) position, insert the ignition key, and start the engine. Additional information: 1. Composition: By engaging different gear sets, gear shifting is achieved. As the critical component for power distribution, the transmission must have two major parts - the power input shaft and output shaft, along with the gears that constitute the transmission, forming the most basic components of a manual transmission. 2. Principle: The power input shaft connects to the clutch. The power transmitted from the clutch goes directly through the input shaft to the gear set, which consists of gears with different diameters. Different gear ratios achieve completely different power transmission effects. The gear shifting during normal driving essentially refers to changing gear ratios.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.