What are the reasons for the high fuel consumption of the Changan Star II?

1 Answers
DelKarter
07/30/25 3:40am
Here are the reasons for the high fuel consumption of the Changan Star II: Pressing the accelerator too hard: Many users are always in a hurry when driving, often pressing the accelerator pedal too hard, especially when overtaking or starting. When the car makes a roaring sound, it means the accelerator is pressed too hard, leading to incomplete combustion of gasoline and resulting in fuel waste, which is very fuel-consuming. Not pressing the accelerator smoothly: Some users, even without pressing the accelerator too hard, still consume a lot of fuel. This happens when they cannot keep their foot steady on the accelerator pedal, frequently lifting and pressing it, causing the car to constantly lose and regain power, which leads to fuel waste. Braking too hard: Some users do not like to slow down gradually when driving and often brake hard when approaching the car in front. This rapid deceleration requires more fuel when accelerating again, which many people believe is the main reason for high fuel consumption when driving.
Was this review help?
14
2
Share
More Forum Discussions

What is the exceed car?

exceed is the Exeed brand under Chery, positioned as a mid-to-high-end brand developed on the new m3x platform. Exeed primarily targets the mid-to-high-end and overseas markets, with its series positioning higher than the Arrizo and Tiggo series. Models under the Exeed brand include: Exeed TX, Exeed LX, Exeed TXL, and Exeed Landmark. Taking the 2021 Exeed TX two-wheel-drive Star Edition as an example, it features a five-door, five-seat SUV body structure with dimensions of 4690mm in length, 1885mm in width, and 1706mm in height, a wheelbase of 2715mm, front track of 1616mm, rear track of 1593mm, a fuel tank capacity of 55 liters, a luggage compartment capacity ranging from 461 to 970 liters, and a curb weight of 1560kg.
20
5
Share

Is it necessary to install a reverse radar when you already have a reverse camera?

It is necessary to install a reverse radar even if you have a reverse camera. The reverse camera can only display images within a fixed range, while the reverse radar can monitor a larger area, enhancing safety during reversing by providing audio alerts when obstacles are detected. The working principle of the reverse camera is as follows: a wide-angle infrared camera is installed at the rear of the vehicle, and the display inside the car shows a clear view of the rear. The working principle of the reverse radar is: under the control of the controller, the sensor emits ultrasonic signals. When encountering an obstacle, an echo signal is generated. After receiving the echo signal, the sensor processes the data through the controller to determine the position of the obstacle. The distance is then displayed on the screen, and a warning signal is issued to achieve safe parking.
17
2
Share

What engine does the BYD Yuan have?

The engine of the BYD Yuan is independently developed and produced by BYD Auto, belonging to a domestically manufactured engine. The 1.5L version of the BYD Yuan is equipped with the BYD473QE engine, delivering a maximum torque of 145 Nm and a maximum horsepower of 109. The 1.5T version features the BYD476ZQA engine, with a maximum torque of 240 Nm and a maximum horsepower of 154. For daily maintenance of the BYD Yuan engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
19
3
Share

How to Use the Jack for the Magotan?

The method for using the jack on the Magotan is as follows: 1. Park the vehicle on a flat, solid surface and engage the handbrake; 2. Locate the designated jack support points on the vehicle's chassis and position the jack directly beneath them; 3. Use the jack's crank to turn the screw in a clockwise direction; 4. As the jack approaches the vehicle's support point, ensure it is correctly aligned; 5. After confirming proper alignment, continue turning the screw to lift the vehicle. Taking the 2020 Magotan as an example, it is a mid-size sedan with body dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, a wheelbase of 2871mm, and a curb weight of 1445kg.
14
0
Share

What to Do If Your Driver's License Inspection Has Expired?

You can apply for a new driver's license within 90 days before the expiration date of your current one. Here are more details: 1. Within one year after expiration: Submit a physical condition certificate to the local traffic police department where your household is registered. This will also complete the application for a new driver's license. 2. Bring your ID card and driver's license directly to the license renewal office: There will be on-site services for photo taking, physical examination, photocopying, and license renewal. If you have time, you can also go to a qualified hospital for a physical examination yourself. 3. Take photos at a photo studio: Bring all the required documents to the license renewal office to apply for a new license.
5
3
Share

What are the reasons for BMW's cold engine shaking and stalling?

The reasons for BMW's cold engine shaking and stalling are: 1. Severe engine carbon buildup; 2. Ignition system malfunction; 3. Unstable oil pressure; 4. Aging engine components. Solutions for BMW's cold engine shaking and stalling: 1. Clean the fuel system and check the idle control valve for carbon buildup; 2. Replace the spark plugs; 3. Check the oil pressure and replace components; 4. Replace the engine's shock absorption system. BMW models include: BMW X3, BMW 5 Series, BMW X5, BMW M2, BMW M8, etc. Taking the 2020 BMW M8 as an example, it belongs to the full-size car category with body dimensions of length 5104mm, width 1943mm, height 1420mm, wheelbase 3027mm, fuel tank capacity 68L, and trunk capacity 440L.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.