···
Log in / Register

What are the reasons for the high fuel consumption of Sagitar?

4 Answers
DiDaniella
09/06/25 3:14am

The reasons for the high fuel consumption of Sagitar include: 1. The vehicle is not maintained on time: Failure to replace air filters, fuel filters, spark plugs, clutch plates, and other components in a timely manner can invisibly lead to increased fuel consumption. 2. Carbon deposits and faults in the electronic control system: For example, carbon deposits on the throttle, idle valve, and fuel injectors, as well as inaccurate signals from the oxygen sensor and coolant temperature sensor, are also factors contributing to high fuel consumption. 3. Driving habits: Such as sudden acceleration, sudden braking, and mismatched speed and gear, are also one of the reasons for high fuel consumption. 4. Low tire pressure and the use of inferior fuel: These can also increase the vehicle's fuel consumption. Please conduct a comprehensive inspection if the fuel consumption is too high.

Was this review help?
20
5
Share
LeAddyson
09/18/25 3:16am

As a Sagitar owner who has driven it for five years, the fuel consumption issue starts with routine maintenance. Insufficient tire pressure is the most common problem - checking the tires often reveals low pressure, which increases rolling resistance and causes fuel consumption to rise noticeably. A dirty air filter is another culprit, restricting engine airflow and reducing combustion efficiency, naturally leading to higher fuel use. Worn-out or overdue spark plugs result in poor ignition and sluggish acceleration. After I replaced my spark plugs last time, fuel consumption dropped by 10%. Also, old engine oil with poor lubrication increases friction - regular maintenance is key. If these aspects aren't properly addressed, even without major faults, fuel consumption will remain high, affecting both your wallet and the environment.

Was this review help?
19
1
Share
Expand All
FelixFitz
11/01/25 3:41am

I often commute with my Sagitar, and I deeply understand the issue of high fuel consumption. Driving habits are crucial—a sudden hard acceleration at startup or frequent hard braking in the city can cause fuel consumption to skyrocket. Speeding on highways also consumes more fuel, as increased wind resistance requires more energy. Running the air conditioning too aggressively in summer, especially during cooling, increases the burden on the engine due to the compressor's operation, raising fuel consumption by up to 20%. Idling for too long is another bad habit, as the engine burns fuel without moving. I recommend using an app to track fuel consumption changes—fixing these habits can save a lot of money.

Was this review help?
7
5
Share
Expand All
MacAlivia
12/15/25 3:50am

When my Sagitar consumes too much fuel, I always suspect the vehicle's condition first. Excessive carbon buildup in the engine or faulty sensors can cause improper fuel injection, leading to high fuel consumption. Issues in the transmission system, such as dirty transmission fluid or untimely replacement, can make gear shifting less smooth and increase fuel usage. Problems in the fuel system, like clogged injectors or an aging fuel pump, require professional inspection to rule out. Regular checks of the cooling system are essential, as water temperature that's too low affects combustion efficiency. Don't overlook worn wheel hub bearings; additional resistance during steering or driving can increase fuel consumption. Simple DIY maintenance can prevent major problems.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

Where is the oil filter located on the Peugeot 4008?

The oil filter on the Peugeot 4008 is located at the bottom of the engine. The oil filter is a component that must be replaced during every maintenance service. The oil filter, also known as the oil strainer, functions to remove debris, gums, and moisture from the engine oil, delivering clean oil to all lubrication points. The Peugeot 4008 is a strategic SUV model under Dongfeng Peugeot, built on the Mitsubishi ASX platform. In terms of body dimensions, the Peugeot 4008 measures 4510mm in length, 1850mm in width, and 1662mm in height, with a wheelbase of 2730mm. The Peugeot 4008 is available in six variants, powered by either a 1.6T or 1.8T engine.
3
1
Share

Where is the fuel filler switch on the Trumpchi GS7?

The fuel filler switch on the Trumpchi GS7 is located below the left side of the steering wheel, specifically on the left side of the driver's control panel. The Trumpchi GS7 uses a mechanical lock system, where the fuel tank cap is opened via a button inside the car. This feature is not unique to this model; any vehicle with a mechanical lock system can open the fuel tank cap with an interior button. The Trumpchi GS7 is a five-seat mid-size SUV under the GAC Trumpchi brand, continuing the design of the GS8 with changes only to the roof and rear lines starting from the C-pillar, resulting in a more compact rear appearance. In terms of dimensions, the Trumpchi GS7 measures 4730mm in length, 1910mm in width, and 1770mm in height, with a wheelbase of 2720mm.
1
2
Share

Where is the air conditioning filter located in the Renegade?

The air conditioning filter in the Renegade is located behind the glove compartment on the passenger side. To replace the air conditioning filter, you need to remove the glove compartment. The Renegade is a compact SUV under the Jeep brand. In terms of body dimensions, it measures 4250mm in length, 1805mm in width, and 1670mm in height, with a wheelbase of 2570mm. The Renegade adopts the BOXFORM professional design language, achieving a professional SUV body proportion. Its four-wheel, four-corner design results in shorter front and rear overhangs, which not only enhances driving stability but also provides a more spacious interior and excellent visibility.
11
1
Share

What are the installation steps for the Nissan Sylphy navigation system?

Nissan Sylphy navigation installation steps: 1. Remove the original car's cover panel, usually in a left-to-right sequence; 2. Remove the air vent, also typically following a left-to-right sequence, and unscrew the air vent fixing screws; 3. Remove the panel, using a pry tool to loosen it first before gently taking it off; 4. Disconnect the car's emergency light switch wiring; 5. Remove the original CD player and install the new navigation DVD display; 6. After installation, connect the air conditioning control wires, display connection wires, and emergency light switch wiring to complete the final wiring. The Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4641mm in length, 1815mm in width, and 1447mm in height.
17
2
Share

Why Can't a Diesel Car Start After Refueling When It Runs Out of Fuel?

Due to improper operation or inaccurate fuel gauge, the vehicle may run out of fuel while driving, and even after refueling, it may fail to start. Below are some relevant introductions about diesel vehicles: 1. The advantages of diesel engines include high torque and good economic performance. The working process of a diesel engine shares many similarities with that of a gasoline engine, with each working cycle also going through four strokes: intake, compression, power, and exhaust; 2. However, since diesel engines use diesel fuel, which has higher viscosity than gasoline and is less prone to evaporation, and its auto-ignition temperature is lower than that of gasoline, the formation of the combustible mixture and the ignition method differ from those of gasoline engines.
20
3
Share

Why does the brake suddenly become very hard to press when reversing?

When the brake suddenly becomes very hard to press while reversing, it is usually due to a leak or malfunction in the brake booster pump. Here are the detailed explanations regarding the reversing brake: 1. Fault Details: In case of an unexpected brake issue, it is important to repeatedly press the brake pedal several times. This action applies pressure to the braking system where air might be trapped in the oil pipes, and with repeated pressing, there is a chance to restore the braking force. 2. Precautions: If distance permits, try to use intermittent braking (pump the brakes). This method can reduce wear on the vehicle's brake pads and tires. Additionally, always check the rearview mirror. If there is a vehicle approaching from behind without slowing down, turn on the hazard lights and prepare to change lanes in advance.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.