What are the reasons for the high fuel consumption of Changan CS35?

1 Answers
Lloyd
07/29/25 5:30pm
The reasons for the high fuel consumption of Changan CS35 are as follows: Engine carbon deposits: When the engine has carbon deposits and is not cleaned in time, the car's fuel consumption will increase. Spark plug failure: When the spark plug fails, the car's acceleration will slow down, thereby increasing fuel consumption. Abnormal tire pressure: When the tire pressure is abnormal, the impact on fuel consumption is immediate, as increased friction leads to higher fuel consumption. Poor fuel injector atomization: Poor fuel injector atomization can cause blockages, thereby increasing fuel consumption, and sensor failure can lead to continuous fuel injection, further increasing fuel consumption.
Was this review help?
9
2
Share
More Forum Discussions

What is the difference between traditional and beam windshield wipers?

The differences between traditional and beam windshield wipers are: 1. Different working principles: Traditional wipers use multiple support points on the frame to press the wiper blade against the glass, ensuring even force distribution; Beam wipers directly apply force to the steel strip, effectively dispersing concentrated pressure points to maintain uniform force on the rubber blade. 2. Different force application methods: Traditional wipers transmit pressure through multiple layered strips; Beam wipers apply force to the entire rubber blade. Windshield wipers are blade structures installed in front of the windshield, consisting of an electric motor, reducer, four-bar linkage mechanism, wiper arm spindle, and wiper blade.
5
5
Share

How to Open Car Drain Holes?

To open the car drain holes, follow these steps: 1. Open the car door and locate all the drain holes; 2. Remove the covers from the drain holes. Depending on their location, car drain holes can be categorized into door drain holes, sunroof drain holes, air conditioning drain holes, fuel filler drain holes, drain holes under the front windshield, and car condensation drain holes. The car drain holes are located in: 1. The front windshield area of the engine compartment; 2. The four corners inside the sunroof; 3. The lower part of the front and rear doors; 4. Inside the fuel filler cap; 5. The bottom of the spare tire in the trunk; 6. The gaps between the front and rear headlights and the body fenders.
19
3
Share

How to Adjust Engine Valve Clearance?

There are several methods for adjusting valve clearance: 1. Rotate the crankshaft to locate the compression top dead center of the cylinder. 2. First, check if the valve clearance is appropriate. If not, loosen the intake and exhaust valve adjusting screw lock nuts of the cylinder, then loosen the adjusting screw. 3. Insert a feeler gauge with the correct valve clearance value between the tail of the valve stem and the head of the valve rocker arm. While turning the adjusting screw, pull the feeler gauge until you feel slight resistance. 4. Adjust the intake and exhaust valve clearances of other cylinders to the standard value using the same method.
5
5
Share

Where is the Nissan automatic transmission electronic parking brake located?

There is a button with the letter 'P' in front of the Nissan gear shift lever, which is the electronic parking brake. Below is a related introduction to the Nissan Teana: 1. Exterior: The 2021 Teana newly introduced red-black and white-black dual-color exteriors. Except for the entry-level 2.0L model, all models are equipped with 17-inch or larger wheels, LED headlight groups, and LED daytime running lights. 2. Interior: The 2021 Teana upgrade features piano black lacquered door panels, wood grain trim on the center console and gear shift lever box, and exquisite soft material wrapping to enhance the cabin's luxury feel. Additionally, the Phantom Edition is equipped with luxurious LED welcome pedals and exclusive floor mats.
7
0
Share

How is speeding between 10% and 20% in a tunnel penalized?

Speeding between 10% and 20% over the speed limit results in a fine and 3 demerit points. Special vehicles such as medium-sized or larger passenger and cargo trucks, commercial vehicles, school buses, and hazardous material transport vehicles are subject to their specific regulations. Partial introduction of the penalties: 1. Percentage of speeding: (Actual speed minus the speed limit) divided by the speed limit multiplied by 100 equals the percentage of speeding. 2. Speed limits: On roads without speed limit signs or markings, motor vehicles must not exceed the following maximum speeds: 30 km/h for urban roads without a center line and 40 km/h for highways without a center line.
5
5
Share

What are paddle shifters used for?

Paddle shifters are used for gear shifting without the need to depress the clutch pedal. They allow gear changes via the paddles themselves. Paddle shifters are located on the left and right arcs of the steering wheel. The operating steps are: 1. Fully depress the car's brake pedal; 2. Start the car and let it idle; 3. Move the automatic gear lever to D or S mode; 4. To upshift, pull the paddle toward the driver with your index and middle fingers; to downshift, push the paddle toward the steering wheel with your thumb. There are two types of paddle shifters: 1. Fixed type: During steering, the steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: During steering, the paddle shifters rotate together with the steering wheel as a whole.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.