What are the reasons for the high fuel consumption of Changan CS35?

Should You Press the Accelerator After Fully Releasing the Clutch?

No, you can press the accelerator while releasing the clutch. Below is an introduction to the related content: 1. Coordination Between Clutch and Accelerator: When starting a manual transmission car, you need to release the clutch and press the accelerator simultaneously. This is called the coordination between clutch and accelerator. 2. Adjustment: Proper coordination between clutch and accelerator requires adjustments based on the vehicle speed. During the starting phase, place the gear in neutral. After starting, press the clutch pedal all the way down, shift the gear lever into first gear, and slowly release the clutch while pressing the accelerator pedal to ensure a smooth start. 3. Note: When pressing the clutch pedal, make sure to press it all the way down. While slowly releasing the clutch pedal, feel the vehicle's vibration and movement tendency. Once the vehicle starts to vibrate slightly and shows signs of moving, gently press the accelerator and continue to slowly release the clutch pedal until it is fully released, ensuring a smooth start. 4. Gear Shifting: Coordination between clutch and accelerator is equally important when shifting gears while the vehicle is in motion.

9

5

Share

Does Burning Oil Affect the Catalytic Converter?

Burning oil does affect the catalytic converter. When an engine burns oil, it can adhere to the mesh surface of the catalytic converter, reducing the effectiveness of catalytic materials such as palladium and rhodium, ultimately causing the converter to fail. The direct consequence is failing vehicle emission tests. In severe cases, it can clog the converter, leading to poor exhaust flow and difficulty in accelerating. Precautions for using the catalytic converter: 1. If the catalytic converter has mechanical damage, thermal sintering, exceeds 200,000 kilometers in mileage, or suffers from lead poisoning, cleaning may not be effective. 2. If the engine stalls during cleaning, immediately disconnect the hose connecting the engine to the equipment and close the flow valve. Restart the engine and only reconnect and adjust after the idle speed stabilizes. 3. Users should check whether the air-fuel mixture concentration is appropriate to ensure the liquid is drawn into the intake tract in a mist form. 4. Users should clean the catalytic converter after cleaning the throttle body, fuel injectors, and combustion chamber. 5. During cleaning, the idle speed should not be too high to avoid overheating the catalytic converter.

11

5

Share

Is There a Depreciation Fee for Rear-End Collisions?

After your car is rear-ended and the other party is fully at fault, there is no legal provision for depreciation fees, but you can negotiate with the other party regarding the depreciation fee. Here is relevant information about vehicle depreciation fees: 1. Definition of Vehicle Depreciation Fee: Vehicle depreciation fee is the financial representation of vehicle investment recovery. It involves setting aside a certain amount of funds each year to update vehicles and maintain transportation reproduction. Vehicle depreciation fees do not reflect the national economy's investment in transportation vehicles; what effectively reflects the economic price of vehicle depreciation is the vehicle's capital recovery cost. 2. Regulations on Depreciation Period: According to tax laws, passenger cars have a depreciation period of 5 years with a residual value rate of 5%. Even for used cars, the depreciation period is calculated as 5 years from the date of purchase. Tax laws stipulate the following minimum depreciation periods for fixed assets: 20 years for houses and buildings; 10 years for trains, ships, machinery, and other production equipment; and 5 years for electronic equipment, transportation tools other than trains and ships, and tools, furniture, etc., related to production and operation, with a unified residual value ratio of 5% of the original price. The higher the depreciation rate, the worse the vehicle's condition and the lower its residual value.

5

1

Share

Do Rear Passengers Need to Wear Seat Belts on Highways?

Rear passengers in vehicles on highways are required to wear seat belts. A detailed analysis is as follows: 1. Consequences of Not Wearing Seat Belts: Sitting in the rear seat without wearing a seat belt not only seriously endangers the lives of the front-row drivers and passengers but also poses safety risks to oneself. In the event of a vehicle accident, without the protection of a seat belt, rear passengers may directly impact the front seat backs, causing injuries to the nose, arms, neck, etc.; 2. Legal Basis: Article 51 of the Road Traffic Safety Law stipulates that when a motor vehicle is in motion, the driver and passengers must use seat belts as required. Accordingly, during vehicle operation, failure to wear seat belts by drivers or passengers constitutes a violation of the law; 3. Psychological Reliance of Many People on Not Wearing Seat Belts in the Rear Seat May Be: Seat belts are meant to prevent being ejected from the vehicle. The rear compartment is more enclosed than the front, and even in the event of a collision with the vehicle ahead, the front seats provide a barrier, making it much safer.

13

1

Share

What are the issues if a car runs over something on the highway?

Whether running over something on the highway causes problems depends on the hardness of the object. Hard objects are more likely to cause damage to the car, while soft objects are less likely. Below are the relevant details: 1. Introduction: A highway, short for expressway, refers to a road specifically designed for high-speed vehicle travel. Highways have different regulations in various countries, regions, eras, and academic fields. According to China's "Technical Standards for Highway Engineering," highways are multi-lane roads exclusively for directional and lane-based vehicle travel, with full access control. The average annual daily traffic volume on highways should exceed 15,000 passenger cars, with a design speed of 80 to 120 kilometers per hour. 2. Precautions: When driving on a highway, pay attention to road signs; when passing through toll booths and entering the ramp, ensure the speed is limited to below 40 km/h, avoid overtaking, turn on the turn signal, and be aware of the traffic flow on the main road until entering the acceleration lane to speed up.

6

3

Share

What Does Traction Control Failure Mean?

Traction control failure refers to a situation where the vehicle's transmission system cannot generate sufficient torque to rotate the wheels. Symptoms of the failure: The engine operates normally at medium to high speeds, but when the speed is at idle or close to idle, unstable idling or even stalling occurs. Causes of the failure: Traction control failure is usually caused by issues in the intake system and fuel injection control system. Occasionally, it can also be due to mechanical engine failures. Common causes of poor idling include leaks in the intake system, malfunctioning cold start injectors and temperature-time control switches, abnormal fuel supply pressure in the injection system, poor fuel atomization due to injector faults, and ECU failures. The traction control system, abbreviated as TCS, is designed to provide optimal traction under various driving conditions. The control unit of the traction control system is a computer that monitors the speed of all four wheels and the steering angle of the steering wheel. When the vehicle accelerates, if the computer detects a significant speed difference between the driven and non-driven wheels, it immediately determines that the driving force is excessive and sends a signal to reduce the engine's fuel supply and driving force.

11

0

Share

What are the reasons for the high fuel consumption of Changan CS35?

Should You Press the Accelerator After Fully Releasing the Clutch?

Does Burning Oil Affect the Catalytic Converter?

Is There a Depreciation Fee for Rear-End Collisions?

Do Rear Passengers Need to Wear Seat Belts on Highways?

What are the issues if a car runs over something on the highway?

What Does Traction Control Failure Mean?

Should Suzuki GSX250R use 92 or 95 octane gasoline?

Can fully synthetic engine oil be changed every 15,000 kilometers?

What Are the Benefits of Engine Braking?

How Many Kilometers Can a Sedan Be Driven Before Scrapping?