What are the reasons for the high fuel consumption of BYD Surui?

What does vehicle safety technical inspection mean?

Vehicle safety technical inspection refers to the annual inspection of motor vehicles. Different motor vehicles have different scheduled inspection times. Motor vehicles undergoing the annual inspection need to complete specified items on the inspection line. Only after passing the annual inspection can the motor vehicle be allowed on the road. Motor vehicles that fail the annual inspection are not permitted for use. Vehicle annual inspection can be done three months in advance: The annual inspection of motor vehicles can be completed three months in advance. Completing the inspection three months early does not affect the normal use of the motor vehicle. Once a motor vehicle misses the inspection, driving it on the road will be considered illegal. In the event of a traffic accident, the insurance company may refuse to compensate, and the responsibility will fall on the driver. Consequences of not conducting annual inspection: If a motor vehicle fails to undergo the annual inspection procedure for three consecutive inspection cycles, it will be forcibly scrapped. Forcibly scrapped motor vehicles are not allowed on the road. The three inspection cycles represent periods of one and a half years, three years, and six years respectively.

20

1

Share

Can I drive with one license plate missing?

You cannot drive with one license plate missing; you need to obtain a temporary license plate to drive legally. How to handle a lost license plate: After losing a vehicle license plate, you should visit the relevant vehicle management department to apply for a replacement as soon as possible. Note that if one plate is lost and you apply for a replacement, the remaining undamaged plate will also be confiscated, and you will receive two new plates. Driving without a license plate is illegal, so a temporary license plate is required. However, temporary license plates have an expiration date, after which they can no longer be used. Penalties for driving with a missing license plate: Losing a license plate is not an excuse for driving without proper plates. According to regulations, vehicles must display license plates to be driven on public roads. Otherwise, you will face penalties, including a 12-point deduction on your driving record and a fine.

10

0

Share

How Many Kilometers Can a Full Tank of Gas Last for a Car?

Generally, a full tank of gas can support a car to run about 600 kilometers, and it won't be less than 500 kilometers. The relationship between driving distance and fuel tank: The driving distance of a car is directly related to the amount of fuel. Private cars have fuel tanks of different sizes, mainly depending on the engine displacement and the size of the fuel tank. A car with a 2.0-liter displacement consumes about 10 liters of fuel per 100 kilometers, and the fuel tank size is 60-70 liters. Based on the above data, it can run 600-700 kilometers. Other factors affecting driving distance: There are also many factors such as the economy of car load, installation space, displacement and fuel consumption, which will also affect the mileage. Generally, the fuel tank capacity of a car is configured based on the fuel consumption of 500 kilometers on mixed roads. Usually, the fuel tank capacity of a 1.6-1.8-liter displacement is about 40-50 liters, while that of a 2.0-2.4-liter displacement is about 50-60 liters.

14

4

Share

Why does the tire pressure warning light suddenly come on during normal driving?

Normal driving with the tire pressure warning light suddenly illuminating indicates abnormal tire pressure. The standard tire pressures for different tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Abnormal tire pressure is generally caused by the following 3 reasons: Abnormal tire pressure: The system typically alerts when pressure falls below 1.8bar or exceeds 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring system not reset: After inflating the tires, if the tire pressure monitoring system is not reset promptly, it continues to record the previous data, causing the tire pressure warning light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged by impact during driving, it can also trigger the tire pressure warning light. For sensor damage issues, the only solution is to replace it with a new component.

18

2

Share

Should You Engage the Handbrake First or Shift to Neutral First?

In real-life situations, the principle to follow is to engage the handbrake first and then shift to P (Park) when parking. Reasons for engaging the handbrake before shifting to P: This is because the handbrake is more secure than the P gear. In a car's transmission, both P and N (Neutral) gears disconnect the power transmission between the input and output shafts. However, the difference is that the P gear has an additional pawl and gear mechanism at the end of the output shaft. The pawl is fixed to the transmission housing, while the gear is fixed to the end of the output shaft. When the transmission is shifted into P, the pawl presses down and engages with the gear, achieving a locking effect. At this point, both wheels cannot rotate simultaneously in the same direction, preventing the vehicle from moving forward or backward. Consequences of using only P gear: However, if you attempt to push the car while it is only in P gear, you will notice that the vehicle can be slightly moved. This is due to the significant engagement gap between the pawl and the gear. Additionally, the P gear's pawl and gear mechanism has a self-protection feature—when the pushing force reaches a certain level, the pawl will disengage to avoid damaging the transmission. Therefore, the P gear is not as reliable as the handbrake.

4

Share

Does an OBD window lifter affect the car?

An OBD window lifter may harm the car, as program modifications could potentially cause confusion in the vehicle's system. Below is a detailed introduction to car automatic window lifters: Non-wire-cutting window lifters: Non-wire-cutting automatic window lifters are widely used for automatic window lifting functions. They achieve the automatic window lifting function by connecting a decoder in series at the original car's window lifting circuit interface. This method does not affect the car's wiring and has a relatively high safety factor. Wire-cutting automatic window lifters: This type of window lifter requires cutting the wires, and the cut interface is very fragile. It is prone to circuit interruption due to excessive current causing temperature rise, and in severe cases, it may even lead to spontaneous combustion.

3

Share

What are the reasons for the high fuel consumption of BYD Surui?

What does vehicle safety technical inspection mean?

Can I drive with one license plate missing?

How Many Kilometers Can a Full Tank of Gas Last for a Car?

Why does the tire pressure warning light suddenly come on during normal driving?

Should You Engage the Handbrake First or Shift to Neutral First?

Does an OBD window lifter affect the car?

Why is there a shortage of automotive chips now?

What are the measures to improve the efficiency of gasoline engines?

Are Car Rearview Mirror Rain Guards Effective?

Should the specific heat capacity of coolant be large or small?