What are the reasons for the Haval H6 air conditioner not cooling?

1 Answers
AllieLynn
07/30/25 1:39am
Haval H6 air conditioner not cooling reasons and solutions: 1. Condenser issues: The condenser is a component that is very easily overlooked. After the car has been driven for a long time, a lot of dust will accumulate on the condenser. If driven for a long time on roads with a lot of dust, there will be even more dust on the condenser. With too much dust on the condenser, the heat dissipation effect will be greatly reduced. Poor heat dissipation naturally leads to the air conditioner not cooling. Solution: Clean the condenser. 2. Compressor not working: For example, the compressor capacitor is damaged or not working properly. To turn on the air conditioner, you need to press the A/C button, which is the switch that controls the compressor. If the compressor is not working, the air conditioner will naturally not cool. Solution: Repair or replace the compressor. 3. Air conditioner refrigerant leakage: If both the indoor and outdoor units are working and the compressor is also working, this is basically the reason. Solution: Add air conditioner refrigerant.
Was this review help?
17
5
Share
More Forum Discussions

How to Prevent Vehicle Blind Spots?

Preventing vehicle blind spots can be achieved through the following methods: 1. Before getting into the car, inspect the surroundings to ensure safety, paying special attention to the rear of the vehicle; 2. To avoid accidents caused by the left A-pillar blind spot, maintain a controlled speed and be prepared to brake when driving on the left side; 3. When turning, always signal in advance and avoid stopping on the right side of large vehicles. Vehicle blind spots refer to areas around the car that are not directly visible to the driver from the normal seating position, obstructed by the vehicle's structure. These blind spots are categorized into: front blind spots, rear blind spots, side mirror blind spots, A-pillar and B-pillar blind spots, and human-induced blind spots.
15
5
Share

Can Putty Repair Plastic Bumpers?

Yes, but it is not recommended to scrape new ones. Additional Information: Preventing Paint Peeling: The bumper can be primed first, and applying a layer of putty can prevent paint peeling. If the bumper is frequently maintained, you can choose to paint it directly. Since plastic bumpers are prone to collisions during driving, it is recommended to apply a layer of primer to prevent paint from falling off. Painting: Original factory bumpers are often painted even before leaving the factory. In terms of toughness, original bumpers are difficult to deform even under high pressure. However, newly replaced bumpers need to be painted by yourself. If the paint does not adhere well, you can apply a layer of primer.
15
0
Share

What brand has a logo resembling two downward-facing Cs?

The logo featuring two downward-facing Cs belongs to NIO. Here is some relevant information about NIO: 1. Logo symbolism: The NIO logo is divided into upper and lower parts. The upper part is a semicircle representing the sky, symbolizing openness, the future, and goals. The lower part consists of two roads extending towards the horizon, symbolizing direction, action, and forward momentum. 2. Brand philosophy: Co-creation, integration, and win-win cooperation. 3. Product lineup: Includes the NIO ES6, NIO ES8, NIO EC6, NIO EVE, NIO EP9, and NIO ET7. 4. Headquarters location: Hefei City, Anhui Province.
5
1
Share

What is the ground clearance of the Senova X35?

The ground clearance of the Senova X35 is 170mm. The Senova X35 is a compact SUV launched by BAIC Motor. The minimum ground clearance of a vehicle refers to the height of the chassis, specifically the minimum distance between the bottom of the vehicle and the level ground under maximum load conditions. The minimum ground clearance directly affects the vehicle's off-road capability. The dimensions of the Senova X35 are 4300mm in length, 1815mm in width, and 1640mm in height, with a wheelbase of 2570mm. The Senova X35 is equipped with a fuel-efficient 1.5L naturally aspirated engine, delivering a maximum power output of 85kw and a peak torque of 148nm.
15
2
Share

Should You Pull the Clutch When Going Downhill on a Motorcycle?

When going downhill on a motorcycle, you should not pull the clutch. Depending on the steepness and length of the slope, use the appropriate gear and speed, making full use of engine braking while also using the foot brake to control the speed. Pulling the clutch at this time will cause the bike to coast freely. The clutch should only be used when shifting gears or stopping. Avoid coasting in neutral and instead combine engine braking with the brakes to achieve early deceleration. A motorcycle consists of five main components: the engine, transmission system, running gear, steering, braking system, and electrical instrumentation. The engine is typically a two-stroke or four-stroke gasoline engine with high RPM, usually above 5,000 revolutions per minute. The engine crankcase is integrated with the clutch and gearbox, resulting in a compact design.
10
3
Share

What are the reasons for sudden fuel supply failure while driving?

The reasons for sudden fuel supply failure while driving: 1. Issues with the ignition system; 2. Throttle malfunction or intake manifold air leakage; 3. Fuel pump unable to build sufficient pressure, fuel injector unable to spray enough fuel; 4. Oxygen sensor failure; 5. Fuel line blockage causing poor acceleration; 6. Damaged car filter unable to function properly. Solutions for car fuel supply issues: 1. Remove and inspect the fuel pump. If excessive impurities are found in the car's fuel pump, timely treatment is required; 2. Check whether the car battery has sufficient charge. Insufficient battery power can lead to unstable voltage output, which may also cause car malfunctions.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.