What are the reasons for the frequent low battery level in the third-generation Haval H6?

1 Answers
VanAlan
07/30/25 5:06am
It may be due to battery quality issues. The electricity consumed by starting the car requires the car's generator to run steadily for at least 25 minutes to recharge the battery. Here are some related explanations: 1. Vehicle circuit leakage: Battery failure leads to weakened power storage capacity. The driving distance is too short (too many engine starts). There are electrical appliances that are not turned off after the vehicle is parked. It is recommended to contact the local 4S store for testing and repair. 2. Working principle: The battery, also called a storage battery, is a type of battery. Its working principle is to convert chemical energy into electrical energy. Usually, the battery people refer to is a lead-acid battery, which is mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte.
Was this review help?
10
4
Share
More Forum Discussions

Can You Make a U-Turn Where Left Turns Are Prohibited?

At intersections where left turns are prohibited, making a U-turn is also not allowed. If a U-turn is made where it is prohibited, the violator will be fined and receive 3 demerit points according to the "Road Traffic Safety Law." Generally, on long roads, solid lines, dashed lines, or prohibition signs are placed mid-section or before intersections. If there are yellow dashed lines, white dashed lines, and no prohibition signs, U-turns are permitted. However, if there are solid lines or prohibition signs, U-turns are not allowed. Scenarios where U-turns are permitted: If there is a clear U-turn sign at the intersection, a U-turn can be made; if there is a U-turn traffic light, follow the signal's instructions. If there is no traffic light, assess the situation and make the U-turn without obstructing other vehicles or pedestrians. Intersections without explicit "No U-Turn" or "No Left Turn" signs allow U-turns: If there is no clear prohibition, a U-turn is permitted. "No explicit prohibition" means the absence of "No U-Turn" or "No Left Turn" signs and no solid center lines, allowing a safe U-turn. Yellow grid lines also permit U-turns: Yellow grid lines indicate no-parking zones at intersections prone to congestion, important facility entrances, or other designated areas. Stopping on these lines (including waiting at traffic lights) is a violation. Although parking is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. Yellow grid lines without barriers equate to "U-turn permitted." Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn signal, follow it; only proceed on green. When "No Left Turn" and "U-Turn Permitted" signs coexist: U-turns are allowed, but left turns are prohibited. Note that "No U-Turn" is not the same as "No Left Turn." Points to note when making a U-turn at an intersection: Observe road markings—if there are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a "No Left Turn" sign, even without a "No U-Turn" sign, U-turns are not permitted because the actions are similar (a U-turn requires a left turn first). U-turns must be made from the innermost left-turn lane. If in the second left-turn lane, U-turns are not allowed at that intersection. Yield to straight-moving traffic before making a U-turn. Failing to do so may result in full liability for any accidents. Near intersection stop lines, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow—some have straight arrows. Even without explicit "No U-Turn" signs, U-turns are not allowed in such lanes. U-turns on crosswalks are prohibited and constitute a traffic violation.
13
5
Share

What are the symptoms of a damaged car water pump?

Here are the symptoms of a damaged engine water pump: 1. Cooling system failure: This can cause issues such as the heater not producing hot air, unstable engine coolant temperature, or a reduction in coolant leading to poor engine circulation and overheating. 2. Noise from the engine area: A friction sound may occur as the engine rotates, and the volume may change with engine speed. Typically, the more severe the fault, the more noticeable this noise becomes. 3. Unstable idle: Increased resistance in the water pump's rotation can directly affect the engine's operation. This manifests as fluctuations in engine speed after starting the car, and in winter, it may even cause the engine to stall.
19
1
Share

When is the best time to change engine oil in winter?

Winter The optimal time to change engine oil is at the end of November. Below is relevant information about oil changes: 1. Oil change intervals: Engine oils are categorized into three types - mineral oil, semi-synthetic oil, and full synthetic oil, each with different replacement cycles. Generally, mineral oil should be changed every six months or 5,000 kilometers, semi-synthetic oil every six months or 7,500 kilometers, and full synthetic oil every six months or 10,000 kilometers. 2. Considerations when purchasing engine oil: First, choose according to the engine's requirements. Second, try to select multi-grade oil. When the engine is in good condition and the seasonal temperature is low, it's advisable to use oil with lower viscosity to ensure smooth oil circulation.
11
3
Share

Which Gear is the Forward Drive Gear?

In automatic transmission vehicles, the forward drive gear is the D gear, while the reverse gear is the R gear. For manual transmission vehicles, any gear marked with a number is a forward drive gear, and the reverse gear is also the R gear. The forward drive gear is the most commonly used gear. In automatic transmission vehicles, shifting up or down can be accomplished by controlling the accelerator. The reverse gear can only be engaged when the vehicle is stationary, and models with a lock button require pressing the button to switch. Below is relevant information about the forward drive gear and reverse gear: 1. The D gear typically appears in automatic transmission vehicles. It is an abbreviation for "Drive," meaning to move forward. The + and - symbols next to the D gear indicate manual mode. After shifting into D gear, moving the gear lever to the left will enter manual mode. In manual mode, gears need to be changed manually, with the + symbol for upshifting and the - symbol for downshifting. Additionally, automatic transmission vehicles have P, R, and N gears. Among these, the P gear is the parking gear, used for long-term parking; the R gear is the reverse gear; and the N gear is the neutral gear, used for temporary stops, such as at traffic lights. 2. The reverse gear is marked with the letter R and is generally located between the P gear (parking gear) and the N gear (neutral gear). Its purpose is to allow the vehicle to move backward, making it a special driving gear. Whether in manual or automatic transmission vehicles, it is essential to wait until the car has completely stopped before engaging the reverse gear. Otherwise, it will cause some degree of wear on the transmission gears, and prolonged misuse can lead to direct damage, resulting in high repair costs. Additionally, when shifting into reverse gear, it is best to avoid any backward sliding. While brief sliding may not cause significant issues, excessive sliding distance or speed can easily damage internal components of the transmission.
17
0
Share

What Issues Should Be Noted When Reversing?

Pay attention to obstacle obstruction, adjust the interior rearview mirror properly, consider both sides, avoid over-reliance on reversing cameras and parking sensors, and be especially cautious in garages or underground parking lots. Below are the relevant precautions for reversing: 1. Pay attention to obstacle obstruction: When reversing, if there are walls or other vehicles blocking the view, extra caution is needed. Reduce speed, honk frequently, reverse slowly, and look back frequently. 2. Adjust the interior rearview mirror properly: Due to varying heights, the rearview mirror should be adjusted accordingly to avoid obstructed views when looking directly backward. Especially when driving someone else's car or a company vehicle, ensure the mirror is properly adjusted if you rely on it for reversing; otherwise, visibility may be compromised. 3. Consider both sides: If the parking space is small and vehicles are close together, pay attention to both sides while reversing. Avoid turning the steering wheel too sharply. For example, when reversing to the left rear, turn the wheel to the right slowly. If you are very close to the left-side vehicle, turn the wheel back slightly to the left. 4. Avoid over-reliance on reversing cameras and parking sensors: Although reversing cameras provide images of the rear, there are still many blind spots. Relying solely on the camera may result in collisions with unexpected objects, such as animals. Therefore, do not depend too much on the reversing camera; look back frequently before reversing. 5. Be especially cautious in garages or underground parking lots: When reversing in garages or underground parking lots, turn on the low beams, observe the distance to vehicles on both sides, and accurately judge the depth of the vehicle entering the space. Some vehicles have larger rear ends or spare tires at the back, so make accurate judgments based on the actual situation and brake in advance. If necessary, step out of the vehicle to check the distance to the rear wall while reversing.
20
5
Share

What is the battery model for the Wuling Hongguang S key?

The battery model for the Wuling Hongguang S key is CR2016. Below are the detailed specifications of the Wuling Hongguang S: 1. Safety features: Equipped with ABS+EBD, dual airbags, force-limiting seat belts, LED high-mounted brake lights, rear parking sensors, rear window defogging function, rear wiper, child safety locks on the middle doors, automatic door locking, headlight/door open warning system, and a remote key with electronic anti-theft system and automatic car locator function, among other comprehensive safety features. 2. Powertrain: The Wuling Hongguang S is powered by a 1.5L DVVT engine, with maximum power increased to 82kW/5800rpm and maximum torque of 146.5N.m/(3600~4000)rpm. Another option is a 1.2L engine, with maximum power of 63kW/6000rpm and maximum torque of 108N.m/(4400~4800)rpm. All models are paired with a 5-speed manual transmission.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.