What are the reasons for the frequent low battery level in the third-generation Haval H6?

What Are the Reasons for Strong Gasoline Smell When the Car is Cold?

Reasons for strong gasoline smell when the car is cold include: 1. Aging carbon canister rubber hoses leading to leaks, allowing gasoline vapors to enter the intake manifold; 2. Leaking gasoline lines, causing the smell to enter the cabin through the air conditioning system; 3. Residual gasoline from fuel pump disassembly or installation; 4. Aging or uneven gaskets inside the fuel tank cap; 5. Dirty fuel injectors and throttle body due to lack of cleaning, resulting in incomplete gasoline combustion. Solutions for strong gasoline smell inside the car: 1. Replace aging rubber hoses; 2. Tighten or repair leaking gasoline lines; 3. Switch the air conditioning circulation mode to external circulation; 4. Clean the fuel injectors and throttle body.

1

4

Share

Where is the location for adding coolant and windshield washer fluid in Geely Binyue?

Geely Binyue's coolant and windshield washer fluid filling ports are located in the engine compartment. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection first to check for any signs of leakage or cracks in the pipelines, with special attention to the five-way water pipe. The five-way pipe is named for its five connections to various parts, as the coolant flows through it before being distributed to different sections of the car to function. If there is any coolant leakage in this part, replace the water pipe or re-secure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue adding water to the reservoir so that it continuously flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink color. Continue adding clean water until clear water flows out. Note: Remember to remove the heater hose and drain the water from the heater core. About 1 hour after draining, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop slightly. Add more coolant until it reaches the "MAXT" mark on the reservoir.

14

2

Share

Is a Car Air Purifier a Necessity?

Is a car air purifier a necessity? Its functions include: 1. Effectively settling various inhalable suspended particles in the air, preventing the inhalation of harmful floating dust particles; 2. Killing and destroying bacteria, viruses, mold, and mildew, removing sources of disease such as dead skin flakes and pollen in the air, and reducing the spread of diseases through the air; 3. Eliminating strange odors in the air, continuously replacing indoor air to ensure healthy air circulation; 4. Neutralizing harmful gases emitted in the air, reducing physical discomfort caused by inhaling these gases. Types of car air purifiers include: 1. Filter type; 2. Electrostatic dust collection type; 3. Ozone type; 4. Plasma cluster type.

17

2

Share

How is the wading capability of new energy vehicles?

Theoretically, electric vehicles have better wading capability than traditional fuel-powered vehicles. The entire power battery and motor can operate normally even when submerged in water, eliminating concerns about engine damage due to water ingress. Below are specific details about new energy vehicles: 1. Definition: New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving systems to form vehicles with advanced technical principles, new technologies, and novel structures. 2. Types: New energy vehicles include pure electric vehicles, range-extended electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, etc.

7

0

Share

What are the symptoms of using low-quality fuel?

Cars using low-quality fuel may exhibit the following symptoms: difficulty starting or even failure to start; engine shaking at idle after starting; noticeable body vibration; foul-smelling exhaust gases; noisy valves; poor acceleration with high fuel consumption; gear shifting with impact. The vehicle maintenance solutions after using low-quality gasoline are as follows: 1. If the vehicle can currently drive normally without symptoms, promptly go to the nearest 4S shop for the following treatments: completely drain the remaining fuel in the tank, refill with high-quality gasoline, clean the fuel injectors, clean the combustion chamber, and replace the fuel filter. 2. If the vehicle drives normally but the engine idles with slight shaking: promptly go to the nearest 4S shop for the following treatments: completely drain the remaining fuel in the tank, refill with high-quality gasoline, clean the throttle body, clean the fuel injectors, clean the combustion chamber, and replace the fuel filter and fuel pump. 3. Vehicles with starting difficulties, failure to start, engine shaking, poor acceleration, gear shifting impact, or noisy valves should be stopped immediately and request rescue from a 4S shop. Measure cylinder pressure; if the cylinder pressure is normal, disassemble the cylinder head for cleaning, completely drain the remaining fuel in the tank, refill with high-quality gasoline, clean the throttle body, clean the fuel injectors, clean the combustion chamber, and replace the fuel filter and fuel pump. 4. If the engine fails to start and there is no cylinder pressure, with severe piston impact marks, the engine requires major overhaul. Completely drain the remaining fuel in the tank, refill with high-quality gasoline, clean the throttle body, clean the fuel injectors, clean the combustion chamber, and replace the fuel filter and fuel pump.

11

2

Share

How to Set Up One-Touch Window Control in Haval M6?

Haval M6 one-touch window control can be set up as follows: 1. Locate the corresponding control button below the window, which has 5 positions; 2. Push the button to the topmost position to enable one-touch window lifting. The Haval M6 is a compact SUV with the following dimensions: length 4664mm, width 1830mm, height 1729mm, wheelbase 2680mm, front and rear track width 1565mm, minimum ground clearance 180mm, and fuel tank capacity 55L. It is powered by a 1.5T turbocharged engine with a maximum output of 150PS, peak power of 110kW, and maximum torque of 210Nm, paired with a 6-speed manual transmission.

15

3

Share

What are the reasons for the frequent low battery level in the third-generation Haval H6?

What Are the Reasons for Strong Gasoline Smell When the Car is Cold?

Where is the location for adding coolant and windshield washer fluid in Geely Binyue?

Is a Car Air Purifier a Necessity?

How is the wading capability of new energy vehicles?

What are the symptoms of using low-quality fuel?

How to Set Up One-Touch Window Control in Haval M6?

What causes the 2005 Fit to shake when starting?

What is tested in the driving license test subject 1?

What brand of tires does the Bluebird use?

What Causes the Engine Fault Light to Illuminate and Then Turn Off?